African Journal of Engineering & Technology (AJET) is a multidisciplinary journal discussing applied research in engineering and technology.
African Journal of Engineering & Technology (AJET) is an open-access, peer-reviewed, and multidisciplinary journal that aims to serve as a platform for researchers, professionals, and policy-makers from a variety of backgrounds to discuss and disseminate applied research in engineering and technology that addresses Africa’s sustainable development. Contributions published in the Journal address Africa’s development through sustainable engineering and technology and present solutions based on critical reviews, case studies, and qualitative and quantitative research. AJET aims to be a platform for research highlighting pathways for Africa's development in alignment with the Sustainable Development Goals and Agenda2063.
The Journal recognizes the importance of a multidisciplinary (and sometimes even cross-disciplinary) approach when tackling Africa’s complex challenges such as poverty, climate change, energy access, water resources management, energy-water-food nexus, and the urban environment and hence welcomes submissions in a broad domain of areas which include:
AJET's Editor-in-Chief is Prof. Abdalbasit Adam Mariod, Professor of Food Science and Technology at the University of Jeddah, Saudi Arabia, and founder of Ghibaish College of Science & Technology, Ghibaish, Sudan. See his full profile here.
AJET is published by the Sudanese Researchers Foundation, which is Sudan's leading NGO in scientific research and development. AJET ISSN is registered with the National Library of New Zealand.
AJET is currently indexed in:
All published articles are assigned a unique DOI and are automatically deposited to Crossref and also to the authors' ORCID accounts. AJET's articles are also archived with CLOCKSS.
Prof. Abdalbasit Adam Mariod,
Professor of Food Science and Technology at the University of Jeddah, Saudi Arabia
Founder of Ghibaish College of Science & Technology, Ghibaish, Sudan
Prof. Mariod is a world renowned expert in food science and technology and an experienced researcher and faculty member. Mariod was classified among the top 2% global highly-cited researchers published in PLOS Biology by Stanford University in 2019. Dr. Mariod's fields of research are: Oil & Fat new sources, Oil & Fat processing technologies, Oil stability, Functional foods and nutraceuticals, Bioactive compounds identification and application, Natural antioxidants activity, Food product development, wild fruits and insects as new food sources. Dr. Mariod is a full member of numerous scientific societies such as the American Oil Chemist Society AOCS, European Federation for Lipid Science & Technology EUROFEDLIPID, Sudanese Natural Products Society SNPS, German Alumni Forestry Network GAForN, and Sudan Academy of Science SAS. He serves as an Editorial board member of more than 9 international Journals, has published more than 212 articles in peer reviewd journals, edited three books for Elsevier and four books for Springer, and four other books for local and regional publishers in Arabic. Mariod worked as Head Research Unit and Innovation, College of Science and Arts-Alkamil, University of Jeddah, Saudi Arabia March 2015 -2019, Deputy Dean of Deanship of Scientific Research, Sudan University of Science & Technology since March 2012, Deputy Dean of College of Graduate Studies & Scientific Research, Sudan University of Science & Technology March 2011 to March 2012, and Staff member of Institute of Bioscience, University Putra Malaysia 2008-2010. He was also a member of the publicity committee and member of editorial board of Bioscientist and Institute of Bioscience journals 2008-2010
Dr. Aida Nitsch, Data Science Consultant
T&S. Schiltigheim, France
Dr. Abdurazak Aman Ketebo, PhD candidate, Mechanical Engineering
Sungkyunkwan University, South Korea
Dr. Husham Elbaloula, Post Doc. Researcher (Reservoir Engineer)
Centro of Petroleum Studies (CEPETRO) - University of Campinas- UNICAMP, SP, Brazil
Dr. MOHAMED AWAD MOHAMED FAGIER, Associate professor
PhD in Chemistry University of Blue Nile, El-Dmazin- Sudan
Dafalla Siddig Dafalla Wadi, Assistant professor
PhD in Engineering Geology, University of Bahri, Khartoum –Sudan.
Haroon Elrasheid Osman Jebreel Tahir, Associate Professor
PhD in Food Science & Technology Jiangsu University, Zhenjiang,China
MOHAMED ABD ELGADIR MOHAMED SAEED, Associate Professor
PhD in Food Science and Technology, Qassim University, Saudi Arabia
Department of Communication, Innovation, and Technology, University for Development Studies, Ghana
Dr. Mohammed Bawa, Associate Professor
Department of Mechanical and Production Engineering, Abubakar Tafawa Balewa University Bauchi, Nigeria
Dr. Babiker Ali, Assistant Professor
College of the North Atlantic, Qatar
Dr. Ahmed Abdelaziz
Founder of the (Open Network Digital Transformation) ONDT Company at Sharjah Research Technology and Innovation Park in UAE
Dr. Elmahadi Ahmed Haroin Abdelbagi
Associate Professor at Arab Academy of Science and Technology, UAE. email:firstname.lastname@example.org
Professor Dr Tarig Mohyeldin Elzaki ,
Department of mathematics, Faculty of Sciences and Arts, Al-Kamil, University of Jeddah, KSA
Prof. Hasan Avezov, Professor of Chemical Sciences, Department of Natural Sciences, Bukhara State University, Uzbekistan,
Dr. Feruza Nurutdinova, Dr. of Chemical Sciences:Bukhara State University, Department of Natural Sciences
,Bukhara, Uzbekistan. email: email@example.com
We are recruiting editorial board members and associate editors in all areas of engineering and technology. To apply, kindly send your CV and list of publications to the Editor-in-Chief, Prof. AbdalBasit Mariod: firstname.lastname@example.org
Authors are required to read the journal’s scope and ensure that submitted manuscripts are aligned with the journal’s objectives and broad readership. At the initial submission stage, AJET doesn’t require authors to format their manuscript according to a specific template. Upon acceptance of the manuscript, the authors shall format the manuscript according the journal’s template, which can be downloaded here. When formatting your article based on the template, please do not edit the header and footer, as this will be done by the editorial office. AJET accepts two types of articles: original research articles (5000 words max.) and review articles (7000 words max.).
The following is a checklist of items to be completed during the manuscript preparation phase:
Please submit your manuscript as one pdf file using the online submission system.
AJET only accepts manuscripts in English (US or UK). It is the responsibility of the authors to ensure that the manuscript has no language or grammar errors. Manuscripts with excessive language errors may be rejected. Authors may choose to use a professional language proofreading service. The Sudanese Researchers Foundation provides language proofreading at an additional cost. To view fees for this service, kindly refer to the APCs and Fees page.
Please ensure you have appropriate permissions to reuse any images or figures in the manuscript. You maybe required to provide proof for permission to reuse images by the editors or reviewers.
Submit your manuscript as a single PDF file via the ‘Submit here’ button above and complete the online form – you will be asked to sign in to MyScienceOpen with your ORCID, or if you are first time user you will be asked to register your ORCID with the journal. Please ensure you have all the items in the submission checklist.
The manuscript will be sent to the editor-in-chief who will assess the suitability of the papers before it is sent out to potential reviewers. The single-blind peer-review process will take approximately 4 weeks. After that the editor-in-chief will make a decision to either: reject the paper, accept it, or request a major or minor revision.
When requested to revise, please follow and make note of the below points to improve reference to any changes for the journal Editors and reviewers:
When responding to the reviewers’ comments, kindly consider the following:
Once you are ready to submit please follow these 3 steps:
Once your manuscript has been accepted for publication by the Editor-in-Chief, you will be required ro format your manuscript in accordance with AJET format, which can be downloaded here. When preparing the copyedited version, kindly ensure the following:
The article processing charges (APCs) for accepted manuscripts is $100 for all article types. The Sudanese Researchers Foundation may waive or reduce the APC on a case-by-case basis. The Sudanese Researchers Foundation also offers an optional English language proofreading service which costs $50 per article. These fee are paid directly to the Sudanese Researchers Foundation via Paypal.
For authors based in Sudan, the APC is waived.
For instructions on payment or to request a waive/reduction of the APC, please contact the Journal’s Editorial Office at: email@example.com.
AJET published open access articles under the CC BY license (http://creativecommons.org/licenses/by/4.0/). All submitted articles must not be under consideration for publication anywhere else, nor have been published in any form prior to submission to AJET. By submitting, authors are agreeing that the submission is original except for material in the public domain and such excerpts of other works that have written permission of the copyright owner.
AJET is committed to ensuring the highest standards of integrity in all aspects of its publication activities and expects that all authors submitting manuscripts to the journal to have secured all relevant ethics or institutional review board (IRB) approval for their research. Any work or research that involves collecting data from human participants must comply in accordance with the Declaration of Helsinki and authors must have received any and all relevant ethics or IRB approvals. A statement declaring this must be included in the article, along with the name of the ethics committee or the IRB granting approval.
Where ethics or institutional review board approval is waived, a statement declaring this must be included in the article along with the name of the ethics committee or the IRB granting waiver status. AJET reserves the right to reject the manuscript if the authors fail to submit any required information on ethical approvals for the research conducted.
Authors must declare any and all conflicts of interest and competing interests that may relate to the submitted article, including all financial and non-financial competing interests. This must be stated in their article after the main text and acknowledgements under the heading ‘Competing and conflicts of interests’. Where there are no conflicts of interests or competing interests, authors must clearly declare this under the same heading.
Authors must ensure submitted the manuscript represents their own original work and any reference to other published works is cited appropriately. All submitted articles will be screened for plagiarism using industry-standard plagiarism detection software.
AJET adopts a single-blind peer-review process for all submitted manuscripts. All manuscripts will be reviewed by at least two subject matter experts. The editor-in-chief and the editorial board members may also review a submitted manuscript. As far as possible, assigned editors and invited reviewers will not possess any potential conflicts of interests to the submitted article. Authors are required to nominate at least 3 reviewers for their manuscripts, and also declare any persons who should not review their manuscripts (due to conflict of interests or any other reasons).
The Editor-in-chief may also decide to reject a review after considering any and all conflicts of interest and the reviewer will be informed of this decision. The Editor-in-chief’s decision is final.
When corrections and retractions are necessary to maintain the integrity of published content, AJET will publish an erratum, corrigendum, addendum, and retraction articles but will not make alterations to the version of record initially published, other than to provide a URL link to the erratum, corrigendum, addendum, or retraction article.
In the event of any suspected allegations of publication and/or research misconduct, AJET will take appropriate action. This can result in AJET contacting the author’s institution and raising concern over the findings and can also lead to sharing article and submission information to other third parties.
In the event that research submitted to AJET is suspected of not having taken place within an appropriate ethical framework (including not acquiring appropriate ethical approvals), the Editors may reject the article and inform the author’s institution and any other third parties where applicable.
In the event of any suspected allegations of publication misconduct concerning any submission or publication, AJET will follow COPE guidelines.
AJET will follow the COPE code of conduct when dealing with any appeals and complaints.
The Sudanese Researchers Foundation is a Sudanese, scientific, voluntary, non-governmental and non-for-profit organization, that aims to create a common platform for interaction between Sudanese learners and researchers to establish and advance the momentum of research and education in Sudan. It was founded in 2009 through the efforts of a small group of Sudanese students and researchers, led by Dr. Anwar Dafa-Alla, Founder and Chairperson, who are passionate about Sudan’s development, and has expanded rapidly until it became the largest digital platform in social media networks for Sudanese researchers and students with over than half a million members.
The Sudanese Researchers Foundation (SRF) operates through a decentralized model and on a voluntary basis. Our volunteers’ network, which includes researchers, scientists, university professors, engineers, doctors, social activists, and other professionals, spans from Christchurch in New Zealand to Vancouver in Canada. Since our launch in 2009, we have conducted countless events to increase the capacity of Sudanese researchers and develop our community. Our achievements include:
Prof. Abdalbasit Adam Mariod, Editor-in-Chief
Professor of Food Science & Technology, University of Jeddah, KSA
Dr. Mohamed Alhaj, Publishing Director & Associate Editor
The Sudanese Researchers Foundation, Sudan
Dr. Anwar Dafalla, Founder & Chairperson
The Sudanese Researchers Foundation, Sudan
Dr. Maram Ali, Editorial Manager
National Ribat University, Sudan
Dr. Isah Yakub Mohammed, Journal Development Manager & Associate Editor
Abubakar Tafawa Balewa University, Nigeria
We invite all universities, scientific institutions, organizations, and donors to support our journal. AJET is a relatively new journal and is operating with a limited budget.
Are you a university or a scientific institution interested in supporting open access research in Africa?
AJET is actively looking for a financial sponsor to support the journal's progress and development for a one year term.
Sponsors will benefit from immense visibility and marketing in the journal's published articles and in our social media platforms.
AJET is published by the Sudanese Researchers Foundation, a member of the UN SDGs Publishers Compact.
Send us an email to discuss! firstname.lastname@example.org
To donate to AJET via PayPal, click here.
|ScienceOpen disciplines:||Engineering, Civil engineering, Environmental management, Policy & Planning, Computer engineering - Hardware, Electrical engineering, Mechanical engineering|
|Keywords:||electrical engineering, computer sciences, energy engineering, chemical and petroleum engineering, civil & environmental engineering, materials science, engineering management, Africa, Sustainable development, mechanical engineering|