211
views
0
recommends
+1 Recommend
0 collections
    8
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      The Chinese import ban and its impact on global plastic waste trade

      research-article

      Read this article at

          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          For decades China imported much of the world’s plastic waste; but a recent import ban requires new ideas and systemic change.

          Abstract

          The rapid growth of the use and disposal of plastic materials has proved to be a challenge for solid waste management systems with impacts on our environment and ocean. While recycling and the circular economy have been touted as potential solutions, upward of half of the plastic waste intended for recycling has been exported to hundreds of countries around the world. China, which has imported a cumulative 45% of plastic waste since 1992, recently implemented a new policy banning the importation of most plastic waste, begging the question of where the plastic waste will go now. We use commodity trade data for mass and value, region, and income level to illustrate that higher-income countries in the Organization for Economic Cooperation have been exporting plastic waste (70% in 2016) to lower-income countries in the East Asia and Pacific for decades. An estimated 111 million metric tons of plastic waste will be displaced with the new Chinese policy by 2030. As 89% of historical exports consist of polymer groups often used in single-use plastic food packaging (polyethylene, polypropylene, and polyethylene terephthalate), bold global ideas and actions for reducing quantities of nonrecyclable materials, redesigning products, and funding domestic plastic waste management are needed.

          Related collections

          Most cited references5

          • Record: found
          • Abstract: found
          • Article: not found
          Is Open Access

          An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling

          Over the last 60 years plastics production has increased manifold, owing to their inexpensive, multipurpose, durable and lightweight nature. These characteristics have raised the demand for plastic materials that will continue to grow over the coming years. However, with increased plastic materials production, comes increased plastic material wastage creating a number of challenges, as well as opportunities to the waste management industry. The present overview highlights the waste management and pollution challenges, emphasising on the various chemical substances (known as "additives") contained in all plastic products for enhancing polymer properties and prolonging their life. Despite how useful these additives are in the functionality of polymer products, their potential to contaminate soil, air, water and food is widely documented in literature and described herein. These additives can potentially migrate and undesirably lead to human exposure via e.g. food contact materials, such as packaging. They can, also, be released from plastics during the various recycling and recovery processes and from the products produced from recyclates. Thus, sound recycling has to be performed in such a way as to ensure that emission of substances of high concern and contamination of recycled products is avoided, ensuring environmental and human health protection, at all times.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: found

            Plastic as a Persistent Marine Pollutant

              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Opinion: Why we need an international agreement on marine plastic pollution

                Bookmark

                Author and article information

                Journal
                Sci Adv
                Sci Adv
                SciAdv
                advances
                Science Advances
                American Association for the Advancement of Science
                2375-2548
                June 2018
                20 June 2018
                : 4
                : 6
                : eaat0131
                Affiliations
                College of Engineering, New Materials Institute, University of Georgia, Riverbend Research Lab South, 220 Riverbend Road, Athens, GA 30602, USA.
                Author notes
                [* ]Corresponding author. Email: jjambeck@ 123456uga.edu
                Author information
                http://orcid.org/0000-0002-9949-579X
                http://orcid.org/0000-0003-1248-7218
                Article
                aat0131
                10.1126/sciadv.aat0131
                6010324
                ee65d524-dcb8-4128-b6a5-746cc27cb872
                Copyright © 2018 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).

                This is an open-access article distributed under the terms of the Creative Commons Attribution-NonCommercial license, which permits use, distribution, and reproduction in any medium, so long as the resultant use is not for commercial advantage and provided the original work is properly cited.

                History
                : 15 January 2018
                : 11 May 2018
                Categories
                Research Article
                Research Articles
                SciAdv r-articles
                Environmental Studies
                Environmental Studies
                Custom metadata
                Eunice Diego

                Comments

                Comment on this article