Nitrogen and phosphate removal from wastewater with a mixed microalgae and bacteria culture

This review analyzes the current state of a specific niche of microalgae cultivation; heterotrophic growth in the dark supported by a carbon source replacing the traditional support of light energy. This unique ability of essentially photosynthetic microorganisms is shared by several species of microalgae. Where possible, heterotrophic growth overcomes major limitations of producing useful products from microalgae: dependency on light which significantly complicates the process, increase costs, and reduced production of potentially useful products. As a general role, and in most cases, heterotrophic cultivation is far cheaper, simpler to construct facilities, and easier than autotrophic cultivation to maintain on a large scale. This capacity allows expansion of useful applications from diverse species that is now very limited as a result of elevated costs of autotrophy; consequently, exploitation of microalgae is restricted to small volume of high-value products. Heterotrophic cultivation may allow large volume applications such as wastewater treatment combined, or separated, with production of biofuels. In this review, we present a general perspective of the field, describing the specific cellular metabolisms involved and the best-known examples from the literature and analyze the prospect of potential products from heterotrophic cultures. Copyright © 2010 Elsevier Ltd. All rights reserved.

Organic and inorganic substances which were released into the environment as a result of domestic, agricultural and industrial water activities lead to organic and inorganic pollution. The normal primary and secondary treatment processes of these wastewaters have been introduced in a growing number of places, in order to eliminate the easily settled materials and to oxidize the organic material present in wastewater. The final result is a clear, apparently clean effluent which is discharged into natural water bodies. This secondary effluent is, however, loaded with inorganic nitrogen and phosphorus and causes eutrophication and more long-term problems because of refractory organics and heavy metals that are discharged. Microalgae culture offers an interesting step for wastewater treatments, because they provide a tertiary biotreatment coupled with the production of potentially valuable biomass, which can be used for several purposes. Microalgae cultures offer an elegant solution to tertiary and quandary treatments due to the ability of microalgae to use inorganic nitrogen and phosphorus for their growth. And also, for their capacity to remove heavy metals, as well as some toxic organic compounds, therefore, it does not lead to secondary pollution. In the current review we will highlight on the role of micro-algae in the treatment of wastewater.

Microalgae enhance the removal of nutrients, organic contaminants, heavy metals, and pathogens from domestic wastewater and furnish an interesting raw material for the production of high-value chemicals (algae metabolites) or biogas. Photosynthetic oxygen production also reduces the need for external aeration, which is especially advantageous for the treatment of hazardous pollutants that must be biodegraded aerobically but might volatilize during mechanical aeration. Recent studies have therefore shown that when proper methods for algal selection and cultivation are used, it is possible to use microalgae to produce the O(2) required by acclimatized bacteria to biodegrade hazardous pollutants such as polycyclic aromatic hydrocarbons, phenolics, and organic solvents. Well-mixed photobioreactors with algal biomass recirculation are recommended to protect the microalgae from effluent toxicity and optimize light utilization efficiency. The optimum biomass concentration to maintain in the system depends mainly on the light intensity and the reactor configuration: At low light intensity, the biomass concentration should be optimized to avoid mutual shading and dark respiration whereas at high light intensity, a high biomass concentration can be useful to protect microalgae from light inhibition and optimize the light/dark cycle frequency. Photobioreactors can be designed as open (stabilization ponds or high rate algal ponds) or enclosed (tubular, flat plate) systems. The latter are generally costly to construct and operate but more efficient than open systems. The best configuration to select will depend on factors such as process safety, land cost, and biomass use. Biomass harvest remains a limitation but recent progresses have been made in the selection of flocculating strains, the application of bioflocculants, or the use of immobilized biomass systems.