17
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Exciton quenching by diffusion of 2,3,5,6-tetrafluoro-7,7',8,8'-tetra cyano quino dimethane and its consequences on joule heating and lifetime of organic light-emitting diodes.

      Optics letters

      Read this article at

      ScienceOpenPubMed
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          In this Letter, the effect of F(4)-TCNQ insertion at the anode/hole transport layer (HTL) interface was studied on joule heating and the lifetime of organic light-emitting diodes (OLEDs). Joule heating was found to reduce significantly (pixel temperature decrease by about 10 K at a current density of 40 mA/cm(2)) by this insertion. However, the lifetime was found to reduce significantly with a 1 nm thick F(4)-TCNQ layer, and it improved by increasing the thickness of this layer. Thermal diffusion of F(4)-TCNQ into HTL leads to F(4)-TCNQ ionization by charge transfer, and drift of these molecules into the emissive layer caused faster degradation of the OLEDs. This drift was found to reduce with an increase in the thickness of F(4)-TCNQ.

          Related collections

          Most cited references18

          • Record: found
          • Abstract: not found
          • Article: not found

          Highly efficient organic devices based on electrically doped transport layers.

            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Enhanced electron injection in organic electroluminescence devices using an Al/LiF electrode

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Recent advances in white organic light-emitting materials and devices (WOLEDs).

              WOLEDs offer new design opportunities in practical solid-state lighting and could play a significant role in reducing global energy consumption. Obtaining white light from organic LEDs is a considerable challenge. Alongside the development of new materials with improved color stability and balanced charge transport properties, major issues involve the fabrication of large-area devices and the development of low-cost manufacturing technology. This Review will describe the types of materials (small molecules and polymers) that have been used to fabricate WOLEDs. A range of device architectures are presented and appraised.
                Bookmark

                Author and article information

                Journal
                24081070

                Comments

                Comment on this article