Pollution due to hazardous glass waste

Nowadays there is a continuously increasing worldwide concern for the development of wastewater treatment technologies. The utilization of iron oxide nanomaterials has received much attention due to their unique properties, such as extremely small size, high surface-area-to-volume ratio, surface modifiability, excellent magnetic properties and great biocompatibility. A range of environmental clean-up technologies have been proposed in wastewater treatment which applied iron oxide nanomaterials as nanosorbents and photocatalysts. Moreover, iron oxide based immobilization technology for enhanced removal efficiency tends to be an innovative research point. This review outlined the latest applications of iron oxide nanomaterials in wastewater treatment, and gaps which limited their large-scale field applications. The outlook for potential applications and further challenges, as well as the likely fate of nanomaterials discharged to the environment were discussed. Copyright © 2012 Elsevier B.V. All rights reserved.

The application of low-cost adsorbents obtained from plant wastes as a replacement for costly conventional methods of removing heavy metal ions from wastewater has been reviewed. It is well known that cellulosic waste materials can be obtained and employed as cheap adsorbents and their performance to remove heavy metal ions can be affected upon chemical treatment. In general, chemically modified plant wastes exhibit higher adsorption capacities than unmodified forms. Numerous chemicals have been used for modifications which include mineral and organic acids, bases, oxidizing agent, organic compounds, etc. In this review, an extensive list of plant wastes as adsorbents including rice husks, spent grain, sawdust, sugarcane bagasse, fruit wastes, weeds and others has been compiled. Some of the treated adsorbents show good adsorption capacities for Cd, Cu, Pb, Zn and Ni.