23
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Biomimetic robotic Venus flytrap (Dionaea muscipula Ellis) made with ionic polymer metal composites.

      1
      Bioinspiration & biomimetics

      Read this article at

      ScienceOpenPublisherPubMed
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          The work described in this paper is a novel design of a robotic Venus flytrap (VFT) (Dionaea muscipula Ellis) by means of ionic polymeric metal composite (IPMC) artificial muscles as distributed nanosensors and nanoactuators. Rapid muscular movements in carnivorous plants, such as VFT, which are triggered by antenna-like sensors (trigger hair), present a golden key to study distributed biomolecular motors. Carnivorous plants, such as VFT, possess built-in intelligence (trigger hairs), as a strategy to capture prey, that can be turned on in a controlled manner. In the case of the VFT, the prey that is lured by the sweet nectar in the VFT pair of jaw-like lobes has to flip and move the trigger hairs, which are colorless, bristle-like and pointed. The dynamically moved trigger hairs then electro-elastically send an electric signal to the internal ions in the lobe to migrate outwardly for the jaw-like lobes to close rapidly to capture the prey. The manner in which the VFT lobes bend inward to capture the prey shows a remarkable similarity with typical IPMCs bending in an electric field. Furthermore, the mechano-electrical sensing characteristics of IPMCs also show a remarkable resemblance to mechano-electrical trigger hairs on the lobes of the VFT. The reader is referred to a number of papers in connection with sensing and actuation of IPMCs in particular. Thus, one can integrate IPMC lobes with a common electrode in the middle of one end of the lobes to act like a spine and use IPMC bristles as trigger finger to sense the intrusion of a fly or insect to send a sensing signal to a solid state relay which then triggers the actuation circuit of the IPMC lobes to rapidly bend toward each other and close. The two lobes, which form the trap, are attached to the midrib common electrode which is conveniently termed the spine. The upper surface of each lobe is dished, and spaced along the free margins of the lobes with some 15-20 prong-like teeth. These are tough and pointed, and are inclined at an inward angle so that when the trap is sprung shut they will interlock. We have been experimenting with the VFT closing of its jaw-like lobes that close in about 0.3 s and have gained a lot of knowledge to report on the ionic and electrical mechanisms involved in the operation of such intelligent distributed biomolecular motors.

          Related collections

          Author and article information

          Journal
          Bioinspir Biomim
          Bioinspiration & biomimetics
          1748-3190
          1748-3182
          Dec 2011
          : 6
          : 4
          Affiliations
          [1 ] Biomedical Engineering Laboratory, Department of Mechanical Engineering, University of Maine, Orono, ME 04469, USA. mohsen.shahinpoor@maine.edu
          Article
          S1748-3182(11)95887-6
          10.1088/1748-3182/6/4/046004
          21992999
          25f1f638-24af-4c02-8343-81292eab931d
          History

          Comments

          Comment on this article