+1 Recommend
0 collections
      • Record: found
      • Abstract: found
      • Article: not found

      Solid-State NMR Structure of a Pathogenic Fibril of Full-Length Human α-Synuclein

      Read this article at

          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.


          Misfolded α-synuclein amyloid fibrils are the principal components of Lewy bodies and neurites, hallmarks of Parkinson’s disease (PD). Here we present a high-resolution structure of an α-synuclein fibril, in a form that induces robust pathology in primary neuronal culture, determined by solid-state NMR spectroscopy and validated by electron microscopy and X-ray fiber diffraction. Over 200 unique long-range distance restraints define a consensus structure with common amyloid features including parallel in-register β-sheets and hydrophobic core residues, but also substantial complexity, arising from diverse structural features: an intermolecular salt bridge, a glutamine ladder, close backbone interactions involving small residues, and several steric zippers stabilizing a novel, orthogonal Greek-key topology. These characteristics contribute to the robust propagation of this fibril form, as evidenced by structural similarity of early-onset PD mutants. The structure provides a framework for understanding the interactions of α-synuclein with other proteins and small molecules to diagnose and treat PD.

          Related collections

          Most cited references 86

          • Record: found
          • Abstract: found
          • Article: found
          Is Open Access

          MolProbity: all-atom structure validation for macromolecular crystallography

          1. Summary of MolProbity flow and user interactions The usual interaction with MolProbity (Davis et al., 2007 ▶) is through the internet at or as a main menu item on our general laboratory website at [For bulk users, it is also possible to set up your own local MolProbity server or to use the individual programs in command-line mode.] Tutorial exercises for the whole process of diagnosing and fixing errors can be found on the kinemage site under Teaching/MolProbity. A typical MolProbity session starts with the user uploading a coordinate file of their own or fetching one from the PDB or NDB databases (Berman et al., 1992 ▶, 2000 ▶) in new or old PDB format or in mmCIF format. After checking the thumbnail image and listed characteristics of the input file and editing or reloading if needed, H atoms are added and optimized, with automated correction of Asn/Gln/His 180° flips if needed (Word, Lovell, Richardson et al., 1999 ▶). The user then chooses which validation analyses to run and what reports and output files to generate. The MolProbity interface adjusts the defaults and options presented and even the page flow depending on user choices and on the properties of the file being worked on. These adjustments make MolProbity simple for novice users, while at the same time allowing advanced users to have great control over their runs. The core ‘glue’ that generates the HMTL code controlling the main user interface and programmatic interactions of MolProbity is implemented in the PHP programming language. Underlying the PHP core, the majority of the analysis tasks in MolProbity are performed by individual programs written in a range of languages, including C, C++, Java and Perl. It uses REDUCE and PROBE for all-atom contact analysis, RAMALYZE, ROTALYZE, DANGLE, SILK and SUITENAME for other criteria and KiNG for three-dimensional visualization of the structure and its validation markers directly in the browser. Fig. 1 ▶ shows a key to MolProbity’s graphical markers for validation outliers. Further details are provided below on the specific analyses that MolProbity can perform. The validation results are reported in the form of summaries, charts, two-dimensional and three-dimensional graphics and output files for download. The crucial final step in the MolProbity process is for the crystallographer to download the result files and work off-line to correct as many of the diagnosed problems as feasible. Rebuilding with consideration of the validation outliers, the electron density and the surrounding model is usually per­formed either in Coot (Emsley & Cowtan, 2004 ▶) or in KiNG (Chen et al., 2009 ▶). At resolutions of about 2.5 Å or better it is possible to correct the great majority of outliers (Arendall et al., 2005 ▶), with an order-of-magnitude improvement in the various MolProbity scores and some improvement in geometry, map quality, R factor and R free. An example is shown in Fig. 2 ▶ with before-and-after multi-criterion kinemages. 2. Validation analyses 2.1. Addition of H atoms The presence of H atoms (both nonpolar and polar) is a critical pre­requisite for all-atom contact analysis. Although refinement using H atoms is becoming more common, most crystal structures are still deposited without H atoms. Once a PDB structure file has been uploaded, MolProbity detects whether the file contains a suitable number of H atoms; if not, then the ‘Add H atoms’ option is presented to users first. MolProbity uses the software REDUCE (Word, Lovell, Richardson et al., 1999 ▶) to add and optimize hydrogen positions in both protein and nucleic acid structures, including ligands, but does not add explicit H atoms to waters. OH, SH and NH3 groups (but not methyl groups) are rotationally optimized and His protonation is chosen within each local hydrogen-bond network, including interactions with the first shell of explicit waters. A common problem is that the side-chain ends of Asn, Gln and His are easily fitted 180° backwards, since the electron density alone cannot usually distinguish the correct choice of orientation. REDUCE can automatically diagnose and correct these types of systematic errors by considering all-atom steric overlaps as well as hydrogen bonding within each local network. Automatic correction of Asn/Gln/His flips is the default option in MolProbity during addition of H atoms. MolProbity presents each potential flip correction to the user in kinemage view so they have the option of inspecting the before-and-after effects of each flip and approving (or rejecting) each correction. Fig. 3 ▶ shows an example of a simple Gln flip that is unquestionably correct but that could not have been decided on the basis of hydrogen bonding alone. Other examples can be much more complex, with rotatable OH positions, large hydrogen-bond net­works and multiple com­peting inter­actions evaluated exhaustively. Users can also choose to add H atoms without Asn/Gln/His flips, which is useful in evaluating the atomic coordinates as they were deposited, but which rejects the easiest and most robustly correct improvement that can be made in a crystallo­graphic model (Word, Lovell, Richardson et al., 1999 ▶; Higman et al., 2004 ▶). If flips are performed, the user needs to download and use the corrected PDB file (either with or without the H atoms) in order to benefit. 2.2. All-atom contact analysis Once H atoms have been added to (or detected in) a structure, then the complete ‘Analyze all-atom contacts and geometry’ option is enabled. A main feature of this option is the all-atom contact analysis, which is performed by the program PROBE (Word, Lovell, LaBean et al., 1999 ▶). PROBE operates by, in effect, rolling a 0.5 Å diameter ball around the van der Waals surfaces of atoms to measure the amount of overlap between pairs of nonbonded atoms. When non-donor–acceptor atoms overlap by more than 0.4 Å, PROBE denotes the contact as a serious clash, which is included in the reported clashscore and is shown in kinemage format as a cluster of hot-pink spikes in the overlap region (Fig. 1 ▶). Such large overlaps cannot occur in the actual molecule, but mean that at least one of the two atoms is modeled incorrectly. MolProbity allows users to select any combination of clashes, hydrogen bonds and van der Waals contacts to calculate and display on the structure. By default, all three are enabled for structures that are not excessively large; for large structures, van der Waals contacts are deselected. The ‘clashscore’ is the number of serious clashes per 1000 atoms. It is reported in the MolProbity summary (top of Fig. 4 ▶), with a red/yellow/green color coding for absolute quality. The structure’s percentile rank for clashscore value within the relevant resolution range is also given. In the detailed sortable ‘multi-chart’ (an extract is shown below the summary in Fig. 4 ▶), the worst clash ≥0.4 Å is listed for each residue and highlighted in pink. 2.3. Torsion-angle combinations: updated Ramachandran and rotamer analyses Also included in the ‘Analyze all-atom contacts and geometry’ option is an evaluation of where residues fall in the multi-dimensional distributions of Ramachandran backbone ϕ, ψ angles and side-chain rotamer χ angles. The reference distributions are currently from 100 000 residues in 500 files, quality-filtered at both the file and the residue level. The Ramachandran plots are separated for Gly, Pro and pre-Pro residue types; the general plot has only one in 2000 residues outside the ‘allowed’ contour, which is the same probability as a 3.5σ outlier in a normal distribution. The three specific plots can be robustly contoured only down to excluding one in 500 residues (about 3σ) in the current reference data, but will soon be updated. By ‘robust’ we mean that the contour does not shift with further improvement in resolution or B or with different subselections of the data. When values plateau in this way we can define clear absolute goals for the measure, such as 98% for Ramachandran favored, 2.9 Å for C3′-­endo and <2.9 Å for C2′-endo. MolProbity checks this distance against the modeled sugar pucker, as well as outliers in individual ∊ or δ values. All such outliers are listed in the multi-chart and ribose-pucker outliers are flagged in the kinemage (Fig. 1 ▶). An example is shown in Fig. 6 ▶, where what should have been a C2′-endo pucker (by the short perpendicular) was fitted as an intermediate unfavorable pucker close to the more common default C3′-endo pucker, also producing geometry and ∊ outliers. High-dimensional analysis of the combinations of backbone torsion angles within an RNA ‘suite’ (the unit from sugar to sugar) has shown that there are distinct ‘rotameric’ backbone conformers. The RNA Ontology Consortium has defined a two-character nomenclature and an initial set of 54 favorable RNA backbone conformers (Richardson et al., 2008 ▶). We created the SUITENAME program to identify either the named conformer or an outlier for each suite in an RNA structure. These conformers and their ‘suiteness’ quality score are listed in the MolProbity multi-chart. 2.6. The overall MolProbity score In response to user demand, the ‘MolProbity score’ provides a single number that represents the central Mol­Probity protein quality statistics. It is a log-weighted combination of the clashscore, percentage Ramachandran not favored and percentage bad side-chain rotamers, giving one number that reflects the crystallographic resolution at which those values would be expected. Therefore, a structure with a numerically lower MolProbity score than its actual crystallo­graphic resolution is, quality-wise, better than the average structure at that resolution. There is some distortion in the fit at very high or very low resolutions; for these ranges it is preferable to judge by the resolution-specific percentile score, which is also reported in the summary. Percentile scores are currently given for clashscore and for MolProbity score relative to the cohort of PDB structures within 0.25 Å of the file’s resolution. 3. Correction of outliers 3.1. Manual rebuilding Except for Asn/Gln/His flip corrections, MolProbity does not yet directly include the ability to correct the errors it finds in structures; it relies on users having access to standalone local software for rebuilding and refinement. The stand­alone version of KiNG has some rebuilding tools for modeling side chains and making small local ‘backrub’ adjustments to structures, with the help of electron-density display, interactive contact dots and rotamer evaluation (Davis et al., 2006 ▶; Chen et al., 2009 ▶). Fig. 7 ▶ illustrates such a correction process in KiNG, rebuilding a backward-fitted leucine with a clash and a bad rotamer (one of the cases of a systematic error), resulting in an ideal geometry side chain with an excellent rotamer and well packed all-atom contacts. The top view shows that the original and rebuilt side chains fit the terminal methyls into the same rather ambiguous density, but move the Cγ substantially. More recent versions of this DNA polymerase structure (e.g. PDB code 2hhv at 1.55 Å resolution; Warren et al., 2006 ▶) all use the new conformation. Manual rebuilding is facilitated by the fact that all-atom clashes are inherently directional, as are bond-angle distortions, while a good library of rotamer choices helps the user test all the alternatives. For more extensive refitting, a fully featured crystallo­graphic rebuilding program such as Coot (Emsley & Cowtan, 2004 ▶) is needed. MolProbity generates ‘to-do’ scripts that can be read into Coot, bringing up a button list, where each entry will zoom to a problem area. In combination with the ability of Coot to use REDUCE and PROBE interactively to generate all-atom contact dots, these features make it easier to address the problems diagnosed by MolProbity. Any rebuilding that moves atoms must of course then undergo further crystallo­graphic refinement. Our own laboratory tested the combined cycle of MolProbity, rebuilding and refinement on about 30 protein structures as part of the SouthEast Collaboratory for Structural Genomics (Arendall et al., 2005 ▶), finding that its early application led to a smoother structure-solution process and demonstrably better final structures. In addition to backward-fitted side chains, commonly corrected problems included peptide flips, switched backbone and side chain near chain ends, ‘waters’ that were really ions, noise peaks or unfit alternate conformations and occasionally a shift in sequence register. Many other crystallographic groups have since adopted these methods. 3.2. Automated corrections For correcting RNA-suite outliers, we have collaboratively developed the independent program RNABC (Wang et al., 2008 ▶), which performs an automated search for more suitable backbone conformations of an RNA suite diagnosed with a bad ribose pucker or serious clashes. It leaves the more accurately determined bases and P atoms fixed in place and performs a pruned but systematic search through the other parameters, outputting all acceptable alternatives found within user-set tolerance limits. Recently, we have developed and tested the AUTOFIX program for automated correction of diagnosed backward-fitted Thr, Val, Leu and Arg side chains (Headd et al., 2009 ▶). In contrast to Asn/Gln/His flips, which simply exchange atoms and do not change the agreement with the data, these more complex side chains require real-space refinement in order to determine the proper correction and crystallographic re-refinement after the approximate 180° flips have been made. The original version used Coot to perform rotamer selection and real-space refinement for the proposed corrections, with MolProbity diagnosis before and after. Results were checked by re-refinement. Run on a sample of 945 PDB files, AUTOFIX accepted corrections for over 40% of diagnosed bad Thr, Val and Leu side chains and 15% of bad Arg side chains, or 3679 corrected side chains. A second version is now in the testing stage that substitutes PHENIX real-space refinement, has a faster Python wrapper and also works on Ile. It will soon be incorporated into MolProbity. The most important of our requirements for AUTOFIX is that it does no harm; we are willing to miss some of the possible corrections in order to ensure that those we accept are essentially always true improvements. AUTOFIX should provide MolProbity users with an easy and reliable way of making an initial set of meaningful improvements to their protein structures. Thr and Arg, in particular, make hydrogen bonds that are often important at active sites or binding interfaces and since they are asymmetrical these interactions change drastically if the side chain is fitted backwards. Such improvements were often seen in the test set. 4. Other MolProbity utility functions 4.1. Interface analysis PROBE can also be used to calculate the all-atom contacts at interfaces, e.g. between two chains of a structure or between a protein and a ligand. Access to this feature is provided in MolProbity by the ‘Visualize interface contacts’ analysis option after H atoms have been added. The user is required to choose the chains and/or the molecular types for which to calculate the contacts (e.g. protein versus protein or protein versus heteroatoms or RNA). This functionality creates both a kinemage with the resulting all-atom contacts displayed on the model and a text list of the atom pairs in contact. 4.2. Protein loop fitting MolProbity includes the Java software JIFFILOOP for providing potential protein-fragment conformations that can fit within a gap in a protein structure. We have defined a seven-parameter system that describes the spatial relationship between any two peptides. Briefly, this system consists of the sequence separation, the distance between the two inner Cα atoms, two pseudo-angles and three pseudo-dihedrals. We used this system to create a library of B-factor-filtered fragments from one to 15 peptides long from our Top5200 database of structures, a set of structures chosen from each 70% nonredundant group defined by the PDB, requiring an average of resolution and MolProbity score of ≤2.0. MolProbity runs JIFFILOOP to search this library for candidate fragments to fill gaps within a structure. Alternatively, users can enter beginning and ending residue numbers and MolProbity will search for fragments which can fit between those two residues. Because this process can be fairly time-intensive, JIFFILOOP is not listed under ‘Suggested Tools’ and is currently only accessible under ‘All Tools’ or at the Site map. Also, owing to the size of this package it must be added separately to the installation for a standalone MolProbity server. 4.3. Kinemage construction and viewing MolProbity provides scripts (under the ‘Make simple kinemages’ option) for constructing a number of commonly used kinemage three-dimensional interactive visualization options such as ribbons and various types of stick figures. This functionality is useful for quick browsing of a structure or for initial creation of an illustration or presentation. The file-input page can also accept upload of pre-existing kinemage files for direct on-line viewing within the built-in kinemage viewer KiNG. 4.4. Other file types and functions MolProbity uses a built-in PDB ‘het_dictionary’ for the information needed to add H atoms to small-molecule ligands. The user can construct and read in a custom dictionary if their file contains novel ligands. There is also provision for either uploading or fetching an electron-density map from the Electron Density Server (Kleywegt et al., 2004 ▶) in any of several formats to view on-line in KiNG together with the model and validation results. To investigate functional sites that span across asymmetric units, one can fetch a biological unit file from the PDB. In the file-editing feature, the user can specify whether multiple ‘models’ are alternatives (as in an NMR ensemble) or have been pressed into service for the extra chains in the biological unit. Some X-ray structures are now treated as ensembles. For such cases, MolProbity internally splits the models and analyzes them separately, but constructs an outlier summary strip-chart and a multi-model multi-criterion validation kinemage with both the models and their features under on/off button control. File editing also allows the deletion of chains either before or after hydrogen placement, specifying the resolution of the structure if not given in the file header or removing unwanted H atoms. These tools make it easier and faster to analyze particular parts of a structure using MolProbity and they help to maintain compatibility with other older software. These options are always available as separate utility functions, independent of validation or hydrogen content. 4.5. PDB-format interconversion The release of the remediated PDB version 3.0 format in August 2007 included a number of significant changes, particularly to H-atom names and to nucleic acid residue and atom names. In order to maintain compatibility with the PDB, we converted the entire MolProbity core to use the new format by default. This included updating REDUCE, PROBE, KiNG and PREKIN. However, we realised that users might need to analyze files that were still in the older PDB version 2.3 format. In order to maintain backwards compatibility, we created a Remediator script (available as a standalone Perl or Python script) that can interconvert between the old and the new PDB formats. Whenever a file is input, MolProbity will scan for the presence of old-format atom names and if it detects any then it will run the Remediator script to automatically convert the input file to the new format. After analysis there is then an option available to run the Remediator script and downgrade the output file back into the old version 2.3 format if needed. This allows use of the MolProbity analysis tools even together with older software that has not been updated to use the new format. 5. Discussion 5.1. Global versus local, absolute versus comparative There are three quite different purposes served by structure validation: a gatekeeper function on quality for reviewers or organizations, an aid to crystallographers for obtaining the most model accuracy from their data and a guide to end users for choosing appropriate structures and confidence levels for the conclusions they want to draw. Validation criteria also come in distinct flavors. Those based on the diffraction data are inherently global with respect to the model; for instance, resolution (which is still the most valuable single-factor estimate of model accuracy) and R free (Brünger, 1992 ▶). On the data side, there are also gatekeeper checks for unusual problems such as twinning or gross data incompleteness. R.m.s.d. or r.m.s.Z. of deviations from geo­metrical target values are global, but they only evaluate procedural aspects of refinement and have little to do with model accuracy. Most other validation criteria are inherently local (at the residue or even atom level), including B factor, real-space measures such as RSR-Z (Kleywegt et al., 2004 ▶) and model-only measures such as the various MolProbity criteria described here. Any local measure becomes global when expressed in some normalized form across the entire structure, such as an average, a distribution match or a percentage occurrence of outliers. Strictly local measures are usually not resolution-dependent, but their globally defined versions often are. For some purposes, the desirable form of measure is a comparison (usually a percentile rank) with the cohort of PDB structures at similar resolution. MolProbity currently provides resolution-group percentiles for clashscore and for MolProbity score and will probably expand that to other criteria. Reviewer/gatekeepers are primarily interested in global relative measures such as resolution-dependent percentiles and to some extent in absolute local flags for judging the support behind specific claims. Crystallographers need global relative measures to judge how well they have made use of their data, but it is the local measures, especially specific outliers, that are crucial to helping them to achieve a more accurate structure and to avoid making any dubious claims in poor local regions (such as an invisible inhibitor). End users need absolute global measures to choose between structures and absolute local measures to judge the reliability of the particular features they find of interest. Because of the importance of improving and evaluating the accuracy of individual details of biological importance, both in each structure and in the database as a whole, we have chosen in MolProbity to emphasize calculation and user-friendly display of local indicators. We have also tried to minimize ‘false alarms’, so that a flagged outlier is almost always worth a close look. 5.2. Impact on database quality Since MolProbity was first made available in late 2002, serious user work sessions (performing some operation on an input coordinate file) have multiplied by a large factor each year, with a cumulative total that is now approaching 100 000 by thousands of distinct users. In addition, many companies and structural genomics centers run their own MolProbity servers internally and some aspects have been incorporated into other software or meta-servers. 80% of MolProbity input files are uploaded, presumably by working structural biologists, and the rest are fetched from databases, presumably by end users. Those end users also include students, since MolProbity is increasingly being used for instructional exercises in bio­chemistry classes from high school to graduate level. MolProbity’s unique feature is clash analysis from all-atom contacts, which provides sensitive new evaluation independent of refinement targets. Not surprisingly, the average clashscore remained constant (either globally or by resolution) up to 2002, since there was then no feasible way of targeting or even measuring all-atom clashes. The percentage of incorrect Asn/Gln/His flips also remained level or rose slightly prior to 2003, despite the availability of a hydrogen-bond-based system in WHAT IF (Hooft et al., 1996 ▶), and even while refinement methods, automation and Ramachandran and rotamer quality all improved. To evaluate the contribution MolProbity has made to crystallographic model quality in general, we have therefore plotted clashscore and Asn/Gln/His flips as a function of time in Fig. 8 ▶, with separate linear fits before and after the end of 2002. Gratifyingly, in both cases there is a clear trend of improvement since 2003. Median values also improve very steadily over that period. Anecdotal evidence indicates that this trend is mainly a consequence of thorough adoption of MolProbity-based methods by a small but growing fraction of crystallographers and there is therefore still much scope for further improvement in the future. 6. MolProbity availability MolProbity is freely available for download from for use as a local server. This option requires either Linux or MacOSX, together with PHP and Apache. Instructions for installing MolProbity locally are included with the download. Having a local install allows users to access the MolProbity analysis tools without internet access, as well as allowing companies with privacy or confidentiality concerns to use MolProbity. However, one of the most significant advantages to having a local installation of Mol­Probity is access to command-line tools. These tools provide access to the major analysis tools in MolProbity without having to use the web interface. Also, several scripts are included which allow users to run MolProbity analysis on a set of files rather than just one at a time. Some of the more useful command-line scripts include the following: scripts for adding H atoms, with or without flips, a script for obtaining overall scores for a set of files and a script for calculating a residue-by-residue analysis of a structure. For users of the PHENIX crystallography system (Adams et al., 2002 ▶, 2009 ▶), a number of the main MolProbity quality-analysis tools have been incorporated directly into PHENIX and are accessible through command-line tools or in the PHENIX GUI, including REDUCE, PROBE, RAMALYZE, ROTALYZE, CBETADEV and CLASHSCORE. Currently, only tabular results are provided; we are exploring the possibility of incorporating KiNG and validation visualizations into PHENIX. All of the individual programs called by MolProbity are also available, multi-platform and open source, from the software section at
            • Record: found
            • Abstract: found
            • Article: not found

            NMRPipe: a multidimensional spectral processing system based on UNIX pipes.

            The NMRPipe system is a UNIX software environment of processing, graphics, and analysis tools designed to meet current routine and research-oriented multidimensional processing requirements, and to anticipate and accommodate future demands and developments. The system is based on UNIX pipes, which allow programs running simultaneously to exchange streams of data under user control. In an NMRPipe processing scheme, a stream of spectral data flows through a pipeline of processing programs, each of which performs one component of the overall scheme, such as Fourier transformation or linear prediction. Complete multidimensional processing schemes are constructed as simple UNIX shell scripts. The processing modules themselves maintain and exploit accurate records of data sizes, detection modes, and calibration information in all dimensions, so that schemes can be constructed without the need to explicitly define or anticipate data sizes or storage details of real and imaginary channels during processing. The asynchronous pipeline scheme provides other substantial advantages, including high flexibility, favorable processing speeds, choice of both all-in-memory and disk-bound processing, easy adaptation to different data formats, simpler software development and maintenance, and the ability to distribute processing tasks on multi-CPU computers and computer networks.
              • Record: found
              • Abstract: not found
              • Article: not found

              Alpha-synuclein in Lewy bodies.


                Author and article information

                Nat Struct Mol Biol
                Nat. Struct. Mol. Biol.
                Nature structural & molecular biology
                22 April 2016
                28 March 2016
                May 2016
                28 September 2016
                : 23
                : 5
                : 409-415
                [1 ]Department of Chemistry, University of Illinois at Urbana-Champaign, Urbana, IL, USA
                [2 ]Center for Biophysics and Quantitative Biology, University of Illinois at Urbana-Champaign, Urbana, IL, USA
                [3 ]Department of Pathology and Laboratory Medicine, University of Pennsylvania School of Medicine, Philadelphia, PA, USA
                [4 ]Institute on Aging, University of Pennsylvania School of Medicine, Philadelphia, PA, USA
                [5 ]Center for Neurodegenerative Disease Research, University of Pennsylvania School of Medicine, Philadelphia, PA, USA
                [6 ]Department of Biological Sciences, Vanderbilt University, Nashville, TN, USA
                [7 ]Center for Structural Biology, Vanderbilt University, Nashville, TN, USA
                [8 ]Division of Computational Bioscience, Center for Information Technology, National Institutes of Health, Bethesda, MD, USA
                [9 ]Department of Biological and Experimental Psychology, School of Biological and Chemical Sciences, Queen Mary University of London, UK
                [10 ]Department of Biochemistry, University of Illinois at Urbana-Champaign, Urbana, IL, USA
                Author notes
                Correspondence should be addressed to C.M.R. ( rienstra@ )

                Current address: Department of Chemistry, Yale University, New Haven, CT, USA (M.D.T.), Leibniz-Institut Für Molekulare Pharmakologie, Berlin, Germany (A.J.N.), Department of Chemistry, Mercer University, Macon, GA, USA (K.D.K.), Structural and Computational Biology Unit, European Molecular Biology Laboratory, Heidelberg, Germany (W.W.)


                Users may view, print, copy, and download text and data-mine the content in such documents, for the purposes of academic research, subject always to the full Conditions of use:


                Molecular biology


                Comment on this article