9
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Supercapacitor with extraordinary cycling stability and high rate from nano-architectured polyaniline/graphene on Janus nanofibrous film with shape memory

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Layer-by-layer polyaniline–graphene on multifunctional polyvinyl alcohol nanofibers leads to extremely stable flexible electrodes with high power and rate capability.

          Abstract

          Polyaniline (PAni) is a promising high-capacitance material, but its poor cycle life, limited rate capability and low power density limit its practical applications as an electrode material for supercapacitors. PAni is commonly combined with graphene to enhance its performance, but few studies have tackled all the drawbacks of PAni. To address all the limitations of PAni, a novel flexible electrode has been developed by growing PAni nanowires on graphene-coated polyvinyl alcohol (PVA) nanofibers, followed by a second coating with graphene sheets as nanosized charge collectors. The chemical stability, wettability, light weight and large surface area of nanofibrous crosslinked PVA make it an ideal cushioning support for electrode materials. Shear-exfoliated graphene was employed as an inexpensive source of graphene to enhance the capacitive performance of PAni via rational engineering of a hierarchical nanostructure. A supercapacitor assembled from the flexible composite electrode demonstrated an enhanced rate capability and power density, as well as exceptional cycling performance. The cushioning PVA substrate, together with the first layer of graphene, contributed to maintaining the capacitive performance of the PAni-based supercapacitor over 88 000 charge–discharge cycles. In addition to its supercapacitor application, the PAni-coated PVA film exhibited a rapid shape memory effect on the basis of the expansion and contraction of PAni upon acid doping and base dedoping. PAni-coated PVA films were further employed for the rapid detection of ammonia, HCl and humidity. The simple strategy for constructing a flexible composite electrode, together with the shape memory and sensing properties, offers new potential for flexible supercapacitors, as well as chemomechanical actuation and sensing devices.

          Related collections

          Most cited references39

          • Record: found
          • Abstract: found
          • Article: not found

          A review of electrode materials for electrochemical supercapacitors.

          In this critical review, metal oxides-based materials for electrochemical supercapacitor (ES) electrodes are reviewed in detail together with a brief review of carbon materials and conducting polymers. Their advantages, disadvantages, and performance in ES electrodes are discussed through extensive analysis of the literature, and new trends in material development are also reviewed. Two important future research directions are indicated and summarized, based on results published in the literature: the development of composite and nanostructured ES materials to overcome the major challenge posed by the low energy density of ES (476 references).
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability.

            We report the synthesis of a graphene-sulfur composite material by wrapping poly(ethylene glycol) (PEG) coated submicrometer sulfur particles with mildly oxidized graphene oxide sheets decorated by carbon black nanoparticles. The PEG and graphene coating layers are important to accommodating volume expansion of the coated sulfur particles during discharge, trapping soluble polysulfide intermediates, and rendering the sulfur particles electrically conducting. The resulting graphene-sulfur composite showed high and stable specific capacities up to ∼600 mAh/g over more than 100 cycles, representing a promising cathode material for rechargeable lithium batteries with high energy density.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Supercapacitors based on flexible graphene/polyaniline nanofiber composite films.

              Composite films of chemically converted graphene (CCG) and polyaniline nanofibers (PANI-NFs) were prepared by vacuum filtration the mixed dispersions of both components. The composite film has a layered structure, and PANI-NFs are sandwiched between CCG layers. Furthermore, it is mechanically stable and has a high flexibility; thus, it can be bent into large angles or be shaped into various desired structures. The conductivity of the composite film containing 44% CCG (5.5 x 10(2) S m(-1)) is about 10 times that of a PANI-NF film. Supercapacitor devices based on this conductive flexible composite film showed large electrochemical capacitance (210 F g(-1)) at a discharge rate of 0.3 A g(-1). They also exhibited greatly improved electrochemical stability and rate performances.
                Bookmark

                Author and article information

                Contributors
                (View ORCID Profile)
                (View ORCID Profile)
                Journal
                JMCAET
                Journal of Materials Chemistry A
                J. Mater. Chem. A
                Royal Society of Chemistry (RSC)
                2050-7488
                2050-7496
                October 30 2018
                2018
                : 6
                : 42
                : 21064-21077
                Affiliations
                [1 ]Department of Mechanical Engineering
                [2 ]University of Manitoba
                [3 ]Winnipeg
                [4 ]Canada
                [5 ]Department of Mechanics and Aerospace Engineering
                [6 ]Southern University of Science and Technology
                [7 ]Shenzhen
                [8 ]China
                [9 ]Institute of Burn Research
                [10 ]State Key Laboratory of Trauma, Burn and Combined Injury
                [11 ]Southwest Hospital
                [12 ]Third Military Medical University
                [13 ]Chongqing
                Article
                10.1039/C8TA07426G
                36bce9d0-f9f6-4e4e-9374-1137f390ef97
                © 2018

                http://rsc.li/journals-terms-of-use

                History

                Comments

                Comment on this article