Biopolymer-reinforced synthetic granular nanocomposites for affordable point-of-use water purification

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

Creation of affordable materials for constant release of silver ions in water is one of the most promising ways to provide microbially safe drinking water for all. Combining the capacity of diverse nanocomposites to scavenge toxic species such as arsenic, lead, and other contaminants along with the above capability can result in affordable, all-inclusive drinking water purifiers that can function without electricity. The critical problem in achieving this is the synthesis of stable materials that can release silver ions continuously in the presence of complex species usually present in drinking water that deposit and cause scaling on nanomaterial surfaces. Here we show that such constant release materials can be synthesized in a simple and effective fashion in water itself without the use of electrical power. The nanocomposite exhibits river sand-like properties, such as higher shear strength in loose and wet forms. These materials have been used to develop an affordable water purifier to deliver clean drinking water at US $2.5/y per family. The ability to prepare nanostructured compositions at near ambient temperature has wide relevance for adsorption-based water purification.

Related collections

Most cited references 11

Record: found
Abstract: found
Article: not found

Ion release kinetics and particle persistence in aqueous nano-silver colloids.

Jingyu Liu, Robert H Hurt (2010)

Many important aspects of nanosilver behavior are influenced by the ionic activity associated with the particle suspension, including antibacterial potency, eukaryotic toxicity, environmental release, and particle persistence.The present study synthesizes pure, ion-free, citrate-stabilized nanosilver (nAg) colloids as model systems, and measures their time-dependent release of dissolved silver using centrifugal ultrafiltration and atomic absorption spectroscopy. Ion release is shown to be a cooperative oxidation process requiring both dissolved dioxygen and protons. It produces peroxide intermediates, and proceeds to complete reactive dissolution under some conditions. Ion release rates increase with temperature in the range 0-37 °C, and decrease with increasing pH or addition of humic or fulvic acids. Sea salts have only a minor effect on dissolved silver release. Silver nanoparticle surfaces can adsorb Ag(+), so even simple colloids contain three forms of silver: Ag(0) solids, free Ag(+) or its complexes, and surface-adsorbed Ag(+). Both thermodynamic analysis and kinetic measurements indicate that Ag(0) nanoparticles will not be persistent in realistic environmental compartments containing dissolved oxygen. An empirical kinetic law is proposed that reproduces the observed effects of dissolution time, pH, humic/fulvic acid content, and temperature observed here in the low range of nanosilver concentration most relevant for the environment.

0 comments Cited 290 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Silver-nanoparticle-embedded antimicrobial paints based on vegetable oil.

Ashavani Kumar, Praveen Kumar Vemula, Pulickel M. Ajayan … (2008)

Developing bactericidal coatings using simple green chemical methods could be a promising route to potential environmentally friendly applications. Here, we describe an environmentally friendly chemistry approach to synthesize metal-nanoparticle (MNP)-embedded paint, in a single step, from common household paint. The naturally occurring oxidative drying process in oils, involving free-radical exchange, was used as the fundamental mechanism for reducing metal salts and dispersing MNPs in the oil media, without the use of any external reducing or stabilizing agents. These well-dispersed MNP-in-oil dispersions can be used directly, akin to commercially available paints, on nearly all kinds of surface such as wood, glass, steel and different polymers. The surfaces coated with silver-nanoparticle paint showed excellent antimicrobial properties by killing both Gram-positive human pathogens (Staphylococcus aureus) and Gram-negative bacteria (Escherichia coli). The process we have developed here is quite general and can be applied in the synthesis of a variety of MNP-in-oil systems.

0 comments Cited 216 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Direct seawater desalination by ion concentration polarization.

Sung Jae Kim, Sung Hee Ko, Kwan Kang … (2010)

A shortage of fresh water is one of the acute challenges facing the world today. An energy-efficient approach to converting sea water into fresh water could be of substantial benefit, but current desalination methods require high power consumption and operating costs or large-scale infrastructures, which make them difficult to implement in resource-limited settings or in disaster scenarios. Here, we report a process for converting sea water (salinity approximately 500 mM or approximately 30,000 mg l(-1)) to fresh water (salinity <10 mM or <600 mg l(-1)) in which a continuous stream of sea water is divided into desalted and concentrated streams by ion concentration polarization, a phenomenon that occurs when an ion current is passed through ion-selective membranes. During operation, both salts and larger particles (cells, viruses and microorganisms) are pushed away from the membrane (a nanochannel or nanoporous membrane), which significantly reduces the possibility of membrane fouling and salt accumulation, thus avoiding two problems that plague other membrane filtration methods. To implement this approach, a simple microfluidic device was fabricated and shown to be capable of continuous desalination of sea water (approximately 99% salt rejection at 50% recovery rate) at a power consumption of less than 3.5 Wh l(-1), which is comparable to current state-of-the-art systems. Rather than competing with larger desalination plants, the method could be used to make small- or medium-scale systems, with the possibility of battery-powered operation.