Previous studies demonstrated the environmental and economic benefits of treating lead(II)-contaminated water streams with ferrihydrite in multiple equilibrium sorption stages. In this work, multistage ferrihydrite sorption systems were evaluated for their effectiveness in reducing single-solute zinc(II) (Zn(II)) concentrations in contaminated water streams to very low levels. As for lead(II) (Pb(II)), experimental data and modeling results indicate that a multistage sorption system can significantly reduce Zn(II) effluent concentrations for the same total amount of sorbent or, alternatively, dramatically lower total sorbent consumption for the same effluent Zn(II) concentration. Compared to Pb(II), however, Zn(II) removal requires on the order of 10 times more sorbent to achieve the same target effluent concentration for the same pH and number of stages. Model predictions were made using a steady-state, multistage, equilibrium adsorber model that was previously developed for and integrated into OLI Systems' Environmental Simulation Program (ESP). The modified triple-layer model was used to simulate Zn(II) surface-liquid equilibria within the adsorber model. Engineering screening evaluations again indicate that a 2- to 3-stage sorption process can provide significant economic savings when compared to a 1-stage process operating with the same target effluent Zn(II) concentration. Additional equilibrium stages beyond 2 or 3 provide diminishing economic returns. The major economic driver for multiple contacting stages is reduced capital investment and operating costs for sludge handling, dewatering, and disposal.