Se evaluaron tres bronces: SAE 67, nacional y americano usados típicamente como material de la chumacera en los molinos de caña de azúcar. Se realizaron pruebas desgaste por deslizamiento bajo la norma G77 usando bloques de bronce, anillos de acero SAE 1045 y aceite como lubricante. El tribómetro se calibró usando los anillos de acero SAE 4620 y se usó acero de herramienta SAE O1 para los bloques. Se realizaron metalografías, durezas y rugosidad de los materiales estudiados. El bronce nacional presentó menor coeficiente de fricción y el bronce SAE 67 presentó menor desgaste tanto en el bloque, como en el anillo.
Three bronzes were evaluated: SAE 67, national and american typically used like bearing material in the sugar cane mills. Sliding wear tests were made under the G77 standard, using bronze blocks, SAE 1045 steel ring and oil like lubricant. The tribometer was calibrated using SAE 4620 steel ring and tool steel SAE O1 was used for the blocks. Microstructures, hardness and roughness of the studied materials were assessed. National bronze presented the least friction coefficient and SAE 67 presented the least block ring wear.