6
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: not found
      • Article: not found

      Quantitative NMR Approach to Optimize the Formation of Chemical Building Blocks from Abundant Carbohydrates

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Related collections

          Most cited references26

          • Record: found
          • Abstract: found
          • Article: not found

          Conversion of biomass to selected chemical products.

          This critical review provides a survey illustrated by recent references of different strategies to achieve a sustainable conversion of biomass to bioproducts. Because of the huge number of chemical products that can be potentially manufactured, a selection of starting materials and targeted chemicals has been done. Also, thermochemical conversion processes such as biomass pyrolysis or gasification as well as the synthesis of biofuels were not considered. The synthesis of chemicals by conversion of platform molecules obtained by depolymerisation and fermentation of biopolymers is presently the most widely envisioned approach. Successful catalytic conversion of these building blocks into intermediates, specialties and fine chemicals will be examined. However, the platform molecule value chain is in competition with well-optimised, cost-effective synthesis routes from fossil resources to produce chemicals that have already a market. The literature covering alternative value chains whereby biopolymers are converted in one or few steps to functional materials will be analysed. This approach which does not require the use of isolated, pure chemicals is well adapted to produce high tonnage products, such as paper additives, paints, resins, foams, surfactants, lubricants, and plasticisers. Another objective of the review was to examine critically the green character of conversion processes because using renewables as raw materials does not exempt from abiding by green chemistry principles (368 references).
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Phase modifiers promote efficient production of hydroxymethylfurfural from fructose.

            Furan derivatives obtained from renewable biomass resources have the potential to serve as substitutes for the petroleum-based building blocks that are currently used in the production of plastics and fine chemicals. We developed a process for the selective dehydration of fructose to 5-hydroxymethylfurfural (HMF) that operates at high fructose concentrations (10 to 50 weight %), achieves high yields (80% HMF selectivity at 90% fructose conversion), and delivers HMF in a separation-friendly solvent. In a two-phase reactor system, fructose is dehydrated in the aqueous phase with the use of an acid catalyst (hydrochloric acid or an acidic ion-exchange resin) with dimethylsulfoxide and/or poly(1-vinyl-2-pyrrolidinone) added to suppress undesired side reactions. The HMF product is continuously extracted into an organic phase (methylisobutylketone) modified with 2-butanol to enhance partitioning from the reactive aqueous solution.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Simple chemical transformation of lignocellulosic biomass into furans for fuels and chemicals.

              Lignocellulosic biomass is a plentiful and renewable resource for fuels and chemicals. Despite this potential, nearly all renewable fuels and chemicals are now produced from edible resources, such as starch, sugars, and oils; the challenges imposed by notoriously recalcitrant and heterogeneous lignocellulosic feedstocks have made their production from nonfood biomass inefficient and uneconomical. Here, we report that N,N-dimethylacetamide (DMA) containing lithium chloride (LiCl) is a privileged solvent that enables the synthesis of the renewable platform chemical 5-hydroxymethylfurfural (HMF) in a single step and unprecedented yield from untreated lignocellulosic biomass, as well as from purified cellulose, glucose, and fructose. The conversion of cellulose into HMF is unabated by the presence of other biomass components, such as lignin and protein. Mechanistic analyses reveal that loosely ion-paired halide ions in DMA-LiCl are critical for the remarkable rapidity (1-5 h) and yield (up to 92%) of this low-temperature (
                Bookmark

                Author and article information

                Journal
                ChemSusChem
                ChemSusChem
                Wiley
                18645631
                July 21 2017
                July 21 2017
                July 05 2017
                : 10
                : 14
                : 2990-2996
                Affiliations
                [1 ]Department of Chemistry; Technical University of Denmark; Kemitorvet, Bygning 207 2800 Kgs. Lyngby Denmark
                [2 ]Haldor Topsøe A/S; Haldor Topsøes Allé 1 2800 Kgs. Lyngby Denmark
                Article
                10.1002/cssc.201700587
                4d97cbcc-6a74-406b-b409-81e360f242b8
                © 2017

                http://doi.wiley.com/10.1002/tdm_license_1.1

                http://onlinelibrary.wiley.com/termsAndConditions

                History

                Comments

                Comment on this article