9
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Effects of UV Treatment on Ceria-Stabilized Zirconia/Alumina Nanocomposite (NANOZR)

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Nanostructured zirconia/alumina composite (NANOZR) has been explored as a suitable material for fabricating implants for patients with metal allergy. In this study, we examined the effect of UV treatment on the NANOZR surface. The experimental group was UV-treated NANOZR and the control group was untreated NANOZR. Observation of the surface of the UV-treated materials revealed no mechanical or structural change; however, the carbon content on the material surface was reduced, and the material surface displayed superhydrophilicity. Further, the effects of the UV-induced superhydrophilic properties of NANOZR plates on the adhesion behavior of various cells were investigated. Treatment of the NANOZR surface was found to facilitate protein adsorption onto it. An in vitro evaluation using rat bone marrow cells, human vascular endothelial cells, and rat periodontal ligament cells revealed high levels of adhesion in the experimental group. In addition, it was clarified that the NANOZR surface forms active oxygen and suppresses the generation of oxidative stress. Overall, the study results suggested that UV-treated NANOZR is useful as a new ceramic implant material.

          Related collections

          Most cited references75

          • Record: found
          • Abstract: not found
          • Article: not found

          Osseointegration and its experimental background.

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Impact of Dental Implant Surface Modifications on Osseointegration

            Objective. The aim of this paper is to review different surface modifications of dental implants and their effect on osseointegration. Common marketed as well as experimental surface modifications are discussed. Discussion. The major challenge for contemporary dental implantologists is to provide oral rehabilitation to patients with healthy bone conditions asking for rapid loading protocols or to patients with quantitatively or qualitatively compromised bone. These charging conditions require advances in implant surface design. The elucidation of bone healing physiology has driven investigators to engineer implant surfaces that closely mimic natural bone characteristics. This paper provides a comprehensive overview of surface modifications that beneficially alter the topography, hydrophilicity, and outer coating of dental implants in order to enhance osseointegration in healthy as well as in compromised bone. In the first part, this paper discusses dental implants that have been successfully used for a number of years focusing on sandblasting, acid-etching, and hydrophilic surface textures. Hereafter, new techniques like Discrete Crystalline Deposition, laser ablation, and surface coatings with proteins, drugs, or growth factors are presented. Conclusion. Major advancements have been made in developing novel surfaces of dental implants. These innovations set the stage for rehabilitating patients with high success and predictable survival rates even in challenging conditions.
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Titania Nanotubes Prepared by Chemical Processing

                Bookmark

                Author and article information

                Journal
                Materials (Basel)
                Materials (Basel)
                materials
                Materials
                MDPI
                1996-1944
                18 June 2020
                June 2020
                : 13
                : 12
                : 2772
                Affiliations
                [1 ]Department of Removable Prosthodontics and Occlusion, Osaka Dental University, 8-1 Kuzuha-hanazono-cho, Hirakata, Osaka 573-1121, Japan; komasa-s@ 123456cc.osaka-dent.ac.jp (S.K.); takao-s@ 123456cc.osaka-dent.ac.jp (S.T.); yang-y@ 123456cc.osaka-dent.ac.jp (Y.Y.); zeng-y@ 123456cc.osaka-dent.ac.jp (Y.Z.); liminmin0529@ 123456gmai.com (M.L.); yan-z@ 123456cc.osaka-dent.ac.jp (S.Y.); zhang-h@ 123456cc.osaka-dent.ac.jp (H.Z.); terada-c@ 123456cc.osaka-dent.ac.jp (C.K.)
                [2 ]Osaka Research Institute of Industrial Science and Technology, Morinomiya Center, 1-6-50, Morinomiya, Joto-ku, Osaka 536-8553, Japan; kobaya@ 123456omtri.or.jp
                [3 ]Department of Japan, Faculty of Health Sciences, Osaka Dental University, 1-4-4, Makino-honmachi, Hirakata-shi, Osaka 573-1121, Japan; nisizaki@ 123456cc.osaka-dent.ac.jp (H.N.); kusumoto@ 123456cc.osaka-dent.ac.jp (T.K.)
                [4 ]Department of Advanced Hard Materials, The Institute of Scientific and Industrial Research (ISIR), Osaka University, Osaka 567-0047, Japan; hnishida@ 123456sanken.osaka-u.ac.jp
                Author notes
                [* ]Correspondence: joji@ 123456cc.osaka-dent.ac.jp ; Tel.: +81-72-864-3084; Fax: +81-72-864-3184
                Author information
                https://orcid.org/0000-0001-5400-8479
                https://orcid.org/0000-0001-6778-6915
                Article
                materials-13-02772
                10.3390/ma13122772
                7345710
                32570895
                55238b4a-d809-492b-bc7e-4a4aa50b47b0
                © 2020 by the authors.

                Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license ( http://creativecommons.org/licenses/by/4.0/).

                History
                : 26 April 2020
                : 15 June 2020
                Categories
                Article

                nanozr,uv treatment,implant,bone differentiation,angiogenesis,periodontal tissue regeneration

                Comments

                Comment on this article