11
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Vertical Gate-All-Around Nanowire GaSb-InAs Core-Shell n-Type Tunnel FETs

      research-article

      Read this article at

      ScienceOpenPublisherPMC
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Tunneling Field-Effect Transistors (TFET) are one of the most promising candidates for future low-power CMOS applications including mobile and Internet of Things (IoT) products. A vertical gate-all-around (VGAA) architecture with a core shell (C-S) structure is the leading contender to meet CMOS footprint requirements while simultaneously delivering high current drive for high performance specifications and subthreshold swing below the Boltzmann limit for low power operation. In this work, VGAA nanowire GaSb/InAs C-S TFETs are demonstrated experimentally for the first time with key device properties of subthreshold swing S = 40 mV/dec ( V d  = 10 mV) and current drive up to 40 μA/wire ( V d  = 0.3 V, diameter d = 50 nm) while dimensions including core diameter d, shell thickness and gate length are scaled towards CMOS requirements. The experimental data in conjunction with TCAD modeling reveal interface trap density requirements to reach industry standard off-current specifications.

          Related collections

          Most cited references10

          • Record: found
          • Abstract: found
          • Article: not found

          Tunnel field-effect transistors as energy-efficient electronic switches.

          Power dissipation is a fundamental problem for nanoelectronic circuits. Scaling the supply voltage reduces the energy needed for switching, but the field-effect transistors (FETs) in today's integrated circuits require at least 60 mV of gate voltage to increase the current by one order of magnitude at room temperature. Tunnel FETs avoid this limit by using quantum-mechanical band-to-band tunnelling, rather than thermal injection, to inject charge carriers into the device channel. Tunnel FETs based on ultrathin semiconducting films or nanowires could achieve a 100-fold power reduction over complementary metal-oxide-semiconductor (CMOS) transistors, so integrating tunnel FETs with CMOS technology could improve low-power integrated circuits. © 2011 Macmillan Publishers Limited. All rights reserved
            • Record: found
            • Abstract: not found
            • Article: not found

            Low-Voltage Tunnel Transistors for Beyond CMOS Logic

              • Record: found
              • Abstract: not found
              • Article: not found

              AlGaSb/InAs Tunnel Field-Effect Transistor With On-Current of 78 $\mu\hbox{A}/\mu\hbox{m}$ at 0.5 V

                Author and article information

                Contributors
                tim_vasen@tsmc.com
                Journal
                Sci Rep
                Sci Rep
                Scientific Reports
                Nature Publishing Group UK (London )
                2045-2322
                17 January 2019
                17 January 2019
                2019
                : 9
                : 202
                Affiliations
                [1 ]TSMC Corporate Research, Kapeldreef 75, 3001 Leuven, Belgium
                [2 ]ISNI 0000 0001 0930 2361, GRID grid.4514.4, Lund University, ; Lund, Sweden
                Author information
                http://orcid.org/0000-0002-5260-0281
                Article
                36549
                10.1038/s41598-018-36549-z
                6336843
                30655575
                61dfc348-12f4-4906-b538-87c6047fe87b
                © The Author(s) 2019

                Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

                History
                : 13 September 2018
                : 21 November 2018
                Categories
                Article
                Custom metadata
                © The Author(s) 2019

                Uncategorized
                Uncategorized

                Comments

                Comment on this article

                Related Documents Log