A Review of Algae-Based Produced Water Treatment for Biomass and Biofuel Production

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

Produced water (PW), the largest waste stream generated in oil and gas industries, has the potential to be a harmless product rather than being a waste. Biological processes using microorganisms have proven useful to remediate PW contaminated by petroleum hydrocarbons, complex organic chemicals, and solvents. In particular, the bioremediation of PW using algae is an eco-friendly and low-cost approach due to algae’s ability to utilize certain pollutants as nutrient sources. Therefore, the utilization of PW as an algal growth medium has a great potential to eliminate chemicals from the PW and minimize the large volumes of freshwater needed for cultivation. Although several reviews describing the bioremediation of PW have been published, to the best of our knowledge, no review has exclusively focused on the algae-based PW treatment. Therefore, the present review is dedicated to filling this gap by portraying the many different facets of the algae cultivation in PW. Several algal species that are known to thrive in a wide range of salinity and the critical steps for their cultivation in hypersaline PW have been identified. Overall, this comprehensive review highlights the PW bioremediation using algae and brings attention to utilizing PW to grow biomass that can be processed to generate biofuels and useful bioproducts.

Related collections

Most cited references 136

Record: found
Abstract: found
Article: not found

Biosorbents for heavy metals removal and their future.

Jianlong Wang, Can Chen (2009)

A vast array of biological materials, especially bacteria, algae, yeasts and fungi have received increasing attention for heavy metal removal and recovery due to their good performance, low cost and large available quantities. The biosorbent, unlike mono functional ion exchange resins, contains variety of functional sites including carboxyl, imidazole, sulphydryl, amino, phosphate, sulfate, thioether, phenol, carbonyl, amide and hydroxyl moieties. Biosorbents are cheaper, more effective alternatives for the removal of metallic elements, especially heavy metals from aqueous solution. In this paper, based on the literatures and our research results, the biosorbents widely used for heavy metal removal were reviewed, mainly focusing on their cellular structure, biosorption performance, their pretreatment, modification, regeneration/reuse, modeling of biosorption (isotherm and kinetic models), the development of novel biosorbents, their evaluation, potential application and future. The pretreatment and modification of biosorbents aiming to improve their sorption capacity was introduced and evaluated. Molecular biotechnology is a potent tool to elucidate the mechanisms at molecular level, and to construct engineered organisms with higher biosorption capacity and selectivity for the objective metal ions. The potential application of biosorption and biosorbents was discussed. Although the biosorption application is facing the great challenge, there are two trends for the development of the biosorption process for metal removal. One trend is to use hybrid technology for pollutants removal, especially using living cells. Another trend is to develop the commercial biosorbents using immobilization technology, and to improve the biosorption process including regeneration/reuse, making the biosorbents just like a kind of ion exchange resin, as well as to exploit the market with great endeavor.

0 comments Cited 436 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Is Open Access

Algae-bacteria interactions: Evolution, ecology and emerging applications.

Rishiram Ramanan, Byung-Hyuk Kim, Dae-Hyun Cho … (2016)

Algae and bacteria have coexisted ever since the early stages of evolution. This coevolution has revolutionized life on earth in many aspects. Algae and bacteria together influence ecosystems as varied as deep seas to lichens and represent all conceivable modes of interactions - from mutualism to parasitism. Several studies have shown that algae and bacteria synergistically affect each other's physiology and metabolism, a classic case being algae-roseobacter interaction. These interactions are ubiquitous and define the primary productivity in most ecosystems. In recent years, algae have received much attention for industrial exploitation but their interaction with bacteria is often considered a contamination during commercialization. A few recent studies have shown that bacteria not only enhance algal growth but also help in flocculation, both essential processes in algal biotechnology. Hence, there is a need to understand these interactions from an evolutionary and ecological standpoint, and integrate this understanding for industrial use. Here we reflect on the diversity of such relationships and their associated mechanisms, as well as the habitats that they mutually influence. This review also outlines the role of these interactions in key evolutionary events such as endosymbiosis, besides their ecological role in biogeochemical cycles. Finally, we focus on extending such studies on algal-bacterial interactions to various environmental and bio-technological applications.

0 comments Cited 234 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Review of technologies for oil and gas produced water treatment.

Ahmadun Fakhru’l-Razi, Alireza Pendashteh, Luqman Chuah Abdullah … (2009)

Produced water is the largest waste stream generated in oil and gas industries. It is a mixture of different organic and inorganic compounds. Due to the increasing volume of waste all over the world in the current decade, the outcome and effect of discharging produced water on the environment has lately become a significant issue of environmental concern. Produced water is conventionally treated through different physical, chemical, and biological methods. In offshore platforms because of space constraints, compact physical and chemical systems are used. However, current technologies cannot remove small-suspended oil particles and dissolved elements. Besides, many chemical treatments, whose initial and/or running cost are high and produce hazardous sludge. In onshore facilities, biological pretreatment of oily wastewater can be a cost-effective and environmental friendly method. As high salt concentration and variations of influent characteristics have direct influence on the turbidity of the effluent, it is appropriate to incorporate a physical treatment, e.g., membrane to refine the final effluent. For these reasons, major research efforts in the future could focus on the optimization of current technologies and use of combined physico-chemical and/or biological treatment of produced water in order to comply with reuse and discharge limits.