The circular economy is a new model of production and consumption that involves reusing,
renewing and recycling products to create added value. In this way, the life cycle
of products is lengthened and waste is reduced to a minimum. As a consequence of this
circular approach, the recovery of plant by-products has become increasingly important,
providing multiple environmental, economic and social benefits, since their reuse
generates new valuable products [1]. Moreover, this model reduces the negative consequences
of resource scarcity and environmental degradation, unlike the linear economic model,
based mainly on the "use and throw away" concept that requires large amounts of raw
materials and energy [2].
Vegetable waste produced by the processing industry is a matter of great concern as
it is generated in very large quantities [3]. Furthermore, current plant waste management
strategies, in addition to being costly, have an adverse impact on the environment.
These residues can cause high levels of environmental contamination, since they present
a high biodegradability associated with high moisture content and microbial load.
Anaerobic biological degradation of organic matter is the third anthropogenic source
of atmospheric methane emissions, reaching ca. 32 million tons in 2010 worldwide,
which represents the equivalent of 800 million tons of CO2 [4]. Therefore, there is
a great need to develop strategies in order to reuse these plant by-products and turn
them into useful products at the lowest possible cost [5]. The processing of fruits
and vegetables, plants in general, produces several types of by-products such as solid
residues of shells, peels, seeds, stems, pulp... that can constitute a good natural
source of carbohydrates, proteins and bioactive molecules [6,7] for the food, cosmetic
and pharmaceutical industries [8].
This Special Issue of Biomolecules is dedicated to current research on obtaining molecules
with biological activity from plant residues and their subsequent use in the development
of new products and/or applications. In this context, the waste valorization is the
set of processes applied to the waste with the aim of exploiting the resources they
contain, using them or transforming them to obtain energy (for example, liquid or
gaseous fuels) or chemical products (both plat-form and more elaborated chemicals).
The optimal valorization approach will depend on the nature and properties of the
substances that are present or can be obtained from each type of residue. Currently,
there are many studies on the composition of plant residues, which show that this
type of waste constitutes a very important source of bioactive compounds (vitamins,
minerals, antioxidants…). These biomolecules are essential and non-essential compounds
found in nature and have been shown to have an effect on human health [9].
In this context, one of the first steps in the valorization of residues from vegetal
origin is to obtain extracts rich in potential bioactive compounds. The present Special
Issue collects different works that study the extraction method and the composition
of extracts from different sources such as hazelnuts and walnuts shells, Goji (Lycium
barbarum L.) leaves, Carménère pomace, tomato pomace and Agave sisiana agro-industrial
residue. These are very different and varied plant origins, and all of them contained
bioactive compounds with potential interest for different applications, which reveals
the importance of the plant residues as relevant sources of biomolecules.
For instance, Herrera et al. [10] analyzed qualitatively and quantitatively different
extracts of hazelnut and walnut shells. These shells are a plentiful by-product of
the edible nut processing industries and have traditionally been considered as a low-value
waste. However, they are a source of valuable compounds with an interesting chemical
profile for the chemical and pharmaceutical sectors. The experimental work included
the isolation of crude lipophilic and hydrophilic extracts by means of an accelerated
extraction process, different chromatographic analyses (Gas Chromatography–Flame Ionization
Detection (GC–FID), GC Mass Spectroscopy (GC–MS), High-Pressure Size Exclusion Chromatography
(HPSEC), Thin Layer Chromatography (TLC)) and the subsequent evaluation of the antioxidant
capacity of these extracts. The lipophilic extracts were mainly composed of short
chain fatty acids (stearic, palmitic and oleic acids), triglycerides and sterols.
The more polar fractions presented a higher antioxidant capacity than the crude extracts.
Unlike nutshells, Goji berries (Lycium barbarum L.) have been widely described as
a valuable source of bioactive compounds with great potential for the development
of health-promoting formulations. The work of Conidi et al. [11] aimed to evaluate
the potential of a combination of aqueous extraction and different purification operations
based on different membranes for the recovery of phenolic compounds from Goji leaves,
much less studied than its fruits. Among the analyzed membranes, a 1 kDa membrane
exhibited the best result, eliminating part of the soluble solids and sugar compounds
from polyphenols and improving the antioxidant activity of the aqueous extracts.
Huamán-Castilla et al. [12] evaluated the improvement of polyphenols recovery from
Carménère grape pomace by using glycerol as a co-solvent in aqueous extractions using
a Hot Pressurized Liquid Extraction (HPLE) system. Grape pomace is very rich in different
types of phenolic compounds, which are highly demanded for the production of functional
ingredients for the food, nutraceutical, and cosmetic industries. These authors analyzed
the influence on the extraction of low molecular weight polyphenols from different
water–glycerol mixtures (15%, 32.5% and 50%) at 90, 120 and 150 °C. The optimal extraction
conditions were 150 °C with 32.5% glycerol in the mixture for flavanols and with 50%
glycerol for flavanols, stilbenes and phenolic acids. Another very interesting work
related to the improvement of bioactive extraction processes is that of Nagarajan
et al. [13]. These authors evaluated the potential of a recently developed water-glycerol
induced complexation approach for the extraction of carotenoids from tomato pomace.
Tomato pomace is a rich source of lycopene, β-carotene and pectin, which makes it
an ideal by-product to optimize this type of extraction. The carotenoids and pectin
recovered were structurally analyzed by High-Performance Liquid Chromatography (HPLC)
and spectroscopy. The results obtained indicate that the carotenoid-pectin complex
is a promising green approach to valorize agricultural by-products rich in carotenoids,
valuable for their antioxidant properties.
Andrade et al. [14] demonstrated, both in vitro and in vivo, the potential of Agave
sisalana agroindustrial residue as a safe and effective alternative for the prevention
of the damage caused by oxidative stress and skin aging. This plant from Mexico, commonly
known as sisal, has a great socioeconomic importance because it is the main source
of hard fiber for the production of threads and ropes worldwide. More than 90% of
the gross weight of A. sisalana leaves is discarded as agro-industrial residue with
no commercial value, when it constitutes a promising source of biomolecules such as
saponins and phenolic compounds. The antioxidant activity was evaluated in vitro (total
antioxidant capacity, reducing power, DPPH radical scavenging, metal chelator (Fe2+
and Cu2+) and hydroxyl radical scavenging) and in vivo using the Caenorhabditis elegans
organism model. The extract showed in vitro antioxidant activity in all cases, reduced
the intracellular levels of reactive oxygen species (ROS) in C. elegans and increased
the survival rate of these worms.
The contribution of Aliaño-Gonzalez et al. [15] to this Special Issue is an in-depth
review of the composition and concentration of stilbenes in grapevine canes, which
are the waste generated in the vineyard after the harvest. Different methods of stilbene
extraction from grapevine canes and the extraction conditions are also compiled, highlighting
the advantages and disadvantages of each technique. These stilbene-rich extracts have
applications in several fields as preservatives, antifungals, insecticides or biostimulants.
Likewise, Iriondo-DeHond et al. [16] present a review on the coffee processing by-products,
analyzing their composition, safety and those food applications that have been proposed
or commercialized to date. Dietary fiber is the main component of all coffee by-products
and could easily be extracted for its use as a functional ingredient within the concept
of a healthy diet. The shell and silver skin are also a potential source of micronutrients,
vitamins and minerals, such as ascorbic acid and potassium. The main phenolic compounds
found in these by-products are chlorogenic acids and anthocyanins with important antioxidant
and antidiabetic properties, respectively.
This Special Issue also includes different works in which different recovery strategies
and applications of extracts or products obtained from plant residues are proposed.
Drozłowska et al. [17] showed the potential for the production of spray-dried functional
powders with different emulsifying activity from flaxseed oil cake extract (residue
from the production of cold-pressed flaxseed oil). Flaxseed oil cake is very rich
in proteins and polysaccharides, so it has good emulsifying properties that could
be used in the production of, for example, low-fat products. This work may open a
promising pathway for the production of plant-based spray-dried powders for food applications
as emulsion stabilizers. The work of Esparza et al. [18] studied the effect of the
partial substitution of SO2 by a stem extract from Mazuelo grape and by a commercial
extract of grapevine wood (Vinetan®) in Tempranillo wine. SO2 is a very important
preservative for wine and other foods, but it has several drawbacks mainly associated
with various allergic reactions. After 12 months of ageing in bottle, the wines obtained
by adding extracts hardly showed any differences with respect to the control wines
(with normal doses of SO2). Sensorial analysis revealed that the use of both extracts
as partial substitutes for SO2 could lead to wines with good organoleptic properties,
similar or even better than the control wines.
In the work of Lam et al. [19], the effects and potential of schisandrin B in combination
with albendazole to treat Angiostrongylus cantonensis-induced meningoencephalitis
was investigated. Currently, these infections are predominantly treated with albendazole,
but the use of this anthelmintic can provoke certain neurological symptoms due to
the immune response triggered by the dead worms. Therefore, treatment usually involves
co-administration of corticosteroids to reduce the inflammatory reaction. Corticosteroids
play a useful role in suppressing inflammation in the brain; however, long-term usage
or high dosage may become problematic. Schisandrin B, an active component from Schisandra
chinensis, has been shown to have anti-inflammatory effects on the brain. This study
showed that albendazole-schysandrin B co-therapy could be used as a promising treatment
for Angiostrongylus-induced meningoencephalitis.
Huge amounts of hemp core residues (43,000 tonnes) are collected annually in Europe
with no significant application end. Such lignocellulosic wastes have potential as
a filler or reinforcing material to replace synthetic fibers and wood fibers in polymeric
composites. In the study by Vilaseca et al. [20], the hemp core biomass was treated
with different concentrations of NaOH and then defibrated using a Sprout Waldron equipment
to obtain individual fibers. The results showed that the flexural strength of the
composite materials increased with the intensity of the NaOH treatment. The effect
of NaOH was attributed to the removal of extracts and lignin in the cell wall of the
fiber, which led to an improvement in the interfacial adhesion characteristics. Another
work that shows the interest to take advantage of lignocellulosic materials is that
of Cornejo et al [21], where these materials are proposed as promising alternatives
to non-renewable fossil sources in order to produce aromatic compounds. These authors
isolated and characterized Populus salicaceae, Pinus radiata and Pinus pinaster lignins
from industrial waste and biorefinery effluents. Lignin was depolymerized using homogeneous
(NaOH) and heterogeneous (Ni-, Cu- or Ni-Cu-hydrotalcites) base catalysis and catalytic
hydrogenolysis using Ru/C. The poly-(hydroxy)-aromatic ether fraction was characterized
by size exclusion chromatography (SEC), diffusion-ordered nuclear magnetic resonance
spectroscopy (DOSY NMR), 31P NMR, and heteronuclear simple quantum coherence spectroscopy
(HSQC). These analyses allowed us to establish the preeminent role of thermo-solvolysis
processes in the depolymerization of lignin and showed that the synergistic effect
of Ni and Cu provided monomers with oxidized alkyl side chains.
He et al. [22] obtained a ferulic acid dilactone from ferulic acid (FA) by means of
a peroxidase-catalyzed radical coupling and made it react under different base/acid
conditions. From the treatment with NaOH, new derivatives of this FA dimer such as
2-(4-hydroxy-3-methoxybenzylidene)-3-(hydroxyl-(4-hydroxy-3-methoxyphenyl)-methyl)-succinic
acid and 2-(bis(4-hydroxy-3-methoxyphenyl)-methyl)-succinic acid were obtained. Additionally,
a novel 8-8-coupled cyclic FA dimer (diethyl 6-hydroxy-1-(4-hydroxy-3-methoxyphenyl)-7-methoxy-1,2-dihydronaphthalene-2,3-dicarboxylate)
was identified in products from FA dilactone treated by dry HCl in absolute ethanol.
The synthesis of these diferulates is very important because they can serve as reference
compounds to validate FA dimers isolated from plants for their potential as antioxidants
and antimicrobials. Maznah et al. [23] carried out a field experiment to investigate
the degradation of metsulfuron-methyl applied to an oil palm plantation in two different
doses. Soil samples were collected at different depths (0–10, 10–20, 20–30, 30–40
and 40–50 cm), and different days after the treatment. The results showed a rapid
degradation of metsulfuron-methyl in the soil, with calculated values of half-life
(t½) ranging between 6.3 and 7.9 days
Altogether, the works included in this Special Issue illustrate examples of the recent
progress on the technological advances and applications of different approaches to
obtain bioactive substances or high value-added products from plant residues. The
general objective was to compile research and review articles that cover the latest
trends in the area and thus benefit researchers and readers in advancing their knowledge
on the subject.