49
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Give It AGO: The Search for miRNA-Argonaute Sorting Signals in Arabidopsis thaliana Indicates a Relevance of Sequence Positions Other than the 5′-Position Alone

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          The specific recognition of miRNAs by Argonaute (AGO) proteins, the effector proteins of the RNA-induced silencing complex, constitutes the final step of the biogenesis of miRNAs and is crucial for their target interaction. In the genome of Arabidopsis thaliana (Ath), 10 different AGO proteins are encoded and the sorting decision, which miRNA associates with which AGO protein, was reported to depend exclusively on the identity of the 5′-sequence position of mature miRNAs. Hence, with only four different bases possible, a 5′-position-only sorting signal would not suffice to specifically target all 10 different AGOs individually or would suggest redundant AGO action. Alternatively, other and as of yet unidentified sorting signals may exist. We analyzed a dataset comprising 117 Ath-miRNAs with clear sorting preference to either AGO1, AGO2, or AGO5 as identified in co-immunoprecipitation experiments combined with sequencing. While mutual information analysis did not identify any other single position but the 5′-nucleotide to be informative for the sorting at sufficient statistical significance, significantly better than random classification results using Random Forests nonetheless suggest that additional positions and combinations thereof also carry information with regard to the AGO sorting. Positions 2, 6, 9, and 13 appear to be of particular importance. Furthermore, uracil bases at defined positions appear to be important for the sorting to AGO2 and AGO5, in particular. No predictive value was associated with miRNA length or base pair binding pattern in the miRNA:miRNA* duplex. From inspecting available AGO gene expression data in Arabidopsis, we conclude that the temporal and spatial expression profile may also contribute to the fine-tuning of miRNA sorting and function.

          Related collections

          Most cited references53

          • Record: found
          • Abstract: found
          • Article: not found

          Ultrafast and memory-efficient alignment of short DNA sequences to the human genome

          Rationale Improvements in the efficiency of DNA sequencing have both broadened the applications for sequencing and dramatically increased the size of sequencing datasets. Technologies from Illumina (San Diego, CA, USA) and Applied Biosystems (Foster City, CA, USA) have been used to profile methylation patterns (MeDIP-Seq) [1], to map DNA-protein interactions (ChIP-Seq) [2], and to identify differentially expressed genes (RNA-Seq) [3] in the human genome and other species. The Illumina instrument was recently used to re-sequence three human genomes, one from a cancer patient and two from previously unsequenced ethnic groups [4-6]. Each of these studies required the alignment of large numbers of short DNA sequences ('short reads') onto the human genome. For example, two of the studies [4,5] used the short read alignment tool Maq [7] to align more than 130 billion bases (about 45× coverage) of short Illumina reads to a human reference genome in order to detect genetic variations. The third human re-sequencing study [6] used the SOAP program [8] to align more than 100 billion bases to the reference genome. In addition to these projects, the 1,000 Genomes project is in the process of using high-throughput sequencing instruments to sequence a total of about six trillion base pairs of human DNA [9]. With existing methods, the computational cost of aligning many short reads to a mammalian genome is very large. For example, extrapolating from the results presented here in Tables 1 and 2, one can see that Maq would require more than 5 central processing unit (CPU)-months and SOAP more than 3 CPU-years to align the 140 billion bases from the study by Ley and coworkers [5]. Although using Maq or SOAP for this purpose has been shown to be feasible by using multiple CPUs, there is a clear need for new tools that consume less time and computational resources. Table 1 Bowtie alignment performance versus SOAP and Maq Platform CPU time Wall clock time Reads mapped per hour (millions) Peak virtual memory footprint (megabytes) Bowtie speed-up Reads aligned (%) Bowtie -v 2 Server 15 m 7 s 15 m 41 s 33.8 1,149 - 67.4 SOAP 91 h 57 m 35 s 91 h 47 m 46 s 0.10 13,619 351× 67.3 Bowtie PC 16 m 41 s 17 m 57 s 29.5 1,353 - 71.9 Maq 17 h 46 m 35 s 17 h 53 m 7 s 0.49 804 59.8× 74.7 Bowtie Server 17 m 58 s 18 m 26 s 28.8 1,353 - 71.9 Maq 32 h 56 m 53 s 32 h 58 m 39 s 0.27 804 107× 74.7 The performance and sensitivity of Bowtie v0.9.6, SOAP v1.10, and Maq v0.6.6 when aligning 8.84 M reads from the 1,000 Genome project (National Center for Biotechnology Information Short Read Archive: SRR001115) trimmed to 35 base pairs. The 'soap.contig' version of the SOAP binary was used. SOAP could not be run on the PC because SOAP's memory footprint exceeds the PC's physical memory. For the SOAP comparison, Bowtie was invoked with '-v 2' to mimic SOAP's default matching policy (which allows up to two mismatches in the alignment and disregards quality values). For the Maq comparison Bowtie is run with its default policy, which mimics Maq's default policy of allowing up to two mismatches during the first 28 bases and enforcing an overall limit of 70 on the sum of the quality values at all mismatched positions. To make Bowtie's memory footprint more comparable to Maq's, Bowtie is invoked with the '-z' option in all experiments to ensure only the forward or mirror index is resident in memory at one time. CPU, central processing unit. Table 2 Bowtie alignment performance versus Maq with filtered read set Platform CPU time Wall clock time Reads mapped per hour (millions) Peak virtual memory footprint (megabytes) Bowtie speed up Reads aligned (%) Bowtie PC 16 m 39 s 17 m 47 s 29.8 1,353 - 74.9 Maq 11 h 15 m 58 s 11 h 22 m 2 s 0.78 804 38.4× 78.0 Bowtie Server 18 m 20 s 18 m 46 s 28.3 1,352 - 74.9 Maq 18 h 49 m 7 s 18 h 50 m 16 s 0.47 804 60.2× 78.0 Performance and sensitivity of Bowtie v0.9.6 and Maq v0.6.6 when the read set is filtered using Maq's 'catfilter' command to eliminate poly-A artifacts. The filter eliminates 438,145 out of 8,839,010 reads. Other experimental parameters are identical to those of the experiments in Table 1. CPU, central processing unit. Maq and SOAP take the same basic algorithmic approach as other recent read mapping tools such as RMAP [10], ZOOM [11], and SHRiMP [12]. Each tool builds a hash table of short oligomers present in either the reads (SHRiMP, Maq, RMAP, and ZOOM) or the reference (SOAP). Some employ recent theoretical advances to align reads quickly without sacrificing sensitivity. For example, ZOOM uses 'spaced seeds' to significantly outperform RMAP, which is based on a simpler algorithm developed by Baeza-Yaetes and Perleberg [13]. Spaced seeds have been shown to yield higher sensitivity than contiguous seeds of the same length [14,15]. SHRiMP employs a combination of spaced seeds and the Smith-Waterman [16] algorithm to align reads with high sensitivity at the expense of speed. Eland is a commercial alignment program available from Illumina that uses a hash-based algorithm to align reads. Bowtie uses a different and novel indexing strategy to create an ultrafast, memory-efficient short read aligner geared toward mammalian re-sequencing. In our experiments using reads from the 1,000 Genomes project, Bowtie aligns 35-base pair (bp) reads at a rate of more than 25 million reads per CPU-hour, which is more than 35 times faster than Maq and 300 times faster than SOAP under the same conditions (see Tables 1 and 2). Bowtie employs a Burrows-Wheeler index based on the full-text minute-space (FM) index, which has a memory footprint of only about 1.3 gigabytes (GB) for the human genome. The small footprint allows Bowtie to run on a typical desktop computer with 2 GB of RAM. The index is small enough to be distributed over the internet and to be stored on disk and re-used. Multiple processor cores can be used simultaneously to achieve even greater alignment speed. We have used Bowtie to align 14.3× coverage worth of human Illumina reads from the 1,000 Genomes project in about 14 hours on a single desktop computer with four processor cores. Bowtie makes a number of compromises to achieve this speed, but these trade-offs are reasonable within the context of mammalian re-sequencing projects. If one or more exact matches exist for a read, then Bowtie is guaranteed to report one, but if the best match is an inexact one then Bowtie is not guaranteed in all cases to find the highest quality alignment. With its highest performance settings, Bowtie may fail to align a small number of reads with valid alignments, if those reads have multiple mismatches. If the stronger guarantees are desired, Bowtie supports options that increase accuracy at the cost of some performance. For instance, the '--best' option will guarantee that all alignments reported are best in terms of minimizing mismatches in the seed portion of the read, although this option incurs additional computational cost. With its default options, Bowtie's sensitivity measured in terms of reads aligned is equal to SOAP's and somewhat less than Maq's. Command line options allow the user to increase sensitivity at the cost of greater running time, and to enable Bowtie to report multiple hits for a read. Bowtie can align reads as short as four bases and as long as 1,024 bases. The input to a single run of Bowtie may comprise a mixture of reads with different lengths. Bowtie description and results Bowtie indexes the reference genome using a scheme based on the Burrows-Wheeler transform (BWT) [17] and the FM index [18,19]. A Bowtie index for the human genome fits in 2.2 GB on disk and has a memory footprint of as little as 1.3 GB at alignment time, allowing it to be queried on a workstation with under 2 GB of RAM. The common method for searching in an FM index is the exact-matching algorithm of Ferragina and Manzini [18]. Bowtie does not simply adopt this algorithm because exact matching does not allow for sequencing errors or genetic variations. We introduce two novel extensions that make the technique applicable to short read alignment: a quality-aware backtracking algorithm that allows mismatches and favors high-quality alignments; and 'double indexing', a strategy to avoid excessive backtracking. The Bowtie aligner follows a policy similar to Maq's, in that it allows a small number of mismatches within the high-quality end of each read, and it places an upper limit on the sum of the quality values at mismatched alignment positions. Burrows-Wheeler indexing The BWT is a reversible permutation of the characters in a text. Although originally developed within the context of data compression, BWT-based indexing allows large texts to be searched efficiently in a small memory footprint. It has been applied to bioinformatics applications, including oligomer counting [20], whole-genome alignment [21], tiling microarray probe design [22], and Smith-Waterman alignment to a human-sized reference [23]. The Burrows-Wheeler transformation of a text T, BWT(T), is constructed as follows. The character $ is appended to T, where $ is not in T and is lexicographically less than all characters in T. The Burrows-Wheeler matrix of T is constructed as the matrix whose rows comprise all cyclic rotations of T$. The rows are then sorted lexicographically. BWT(T) is the sequence of characters in the rightmost column of the Burrows-Wheeler matrix (Figure 1a). BWT(T) has the same length as the original text T. Figure 1 Burrows-Wheeler transform. (a) The Burrows-Wheeler matrix and transformation for 'acaacg'. (b) Steps taken by EXACTMATCH to identify the range of rows, and thus the set of reference suffixes, prefixed by 'aac'. (c) UNPERMUTE repeatedly applies the last first (LF) mapping to recover the original text (in red on the top line) from the Burrows-Wheeler transform (in black in the rightmost column). This matrix has a property called 'last first (LF) mapping'. The ith occurrence of character X in the last column corresponds to the same text character as the ith occurrence of X in the first column. This property underlies algorithms that use the BWT index to navigate or search the text. Figure 1b illustrates UNPERMUTE, an algorithm that applies the LF mapping repeatedly to re-create T from BWT(T). The LF mapping is also used in exact matching. Because the matrix is sorted lexicographically, rows beginning with a given sequence appear consecutively. In a series of steps, the EXACTMATCH algorithm (Figure 1c) calculates the range of matrix rows beginning with successively longer suffixes of the query. At each step, the size of the range either shrinks or remains the same. When the algorithm completes, rows beginning with S0 (the entire query) correspond to exact occurrences of the query in the text. If the range is empty, the text does not contain the query. UNPERMUTE is attributable to Burrows and Wheeler [17] and EXACTMATCH to Ferragina and Manzini [18]. See Additional data file 1 (Supplementary Discussion 1) for details. Searching for inexact alignments EXACTMATCH is insufficient for short read alignment because alignments may contain mismatches, which may be due to sequencing errors, genuine differences between reference and query organisms, or both. We introduce an alignment algorithm that conducts a backtracking search to quickly find alignments that satisfy a specified alignment policy. Each character in a read has a numeric quality value, with lower values indicating a higher likelihood of a sequencing error. Our alignment policy allows a limited number of mismatches and prefers alignments where the sum of the quality values at all mismatched positions is low. The search proceeds similarly to EXACTMATCH, calculating matrix ranges for successively longer query suffixes. If the range becomes empty (a suffix does not occur in the text), then the algorithm may select an already-matched query position and substitute a different base there, introducing a mismatch into the alignment. The EXACTMATCH search resumes from just after the substituted position. The algorithm selects only those substitutions that are consistent with the alignment policy and which yield a modified suffix that occurs at least once in the text. If there are multiple candidate substitution positions, then the algorithm greedily selects a position with a minimal quality value. Backtracking scenarios play out within the context of a stack structure that grows when a new substitution is introduced and shrinks when the aligner rejects all candidate alignments for the substitutions currently on the stack. See Figure 2 for an illustration of how the search might proceed. Figure 2 Exact matching versus inexact alignment. Illustration of how EXACTMATCH (top) and Bowtie's aligner (bottom) proceed when there is no exact match for query 'ggta' but there is a one-mismatch alignment when 'a' is replaced by 'g'. Boxed pairs of numbers denote ranges of matrix rows beginning with the suffix observed up to that point. A red X marks where the algorithm encounters an empty range and either aborts (as in EXACTMATCH) or backtracks (as in the inexact algorithm). A green check marks where the algorithm finds a nonempty range delimiting one or more occurrences of a reportable alignment for the query. In short, Bowtie conducts a quality-aware, greedy, randomized, depth-first search through the space of possible alignments. If a valid alignment exists, then Bowtie will find it (subject to the backtrack ceiling discussed in the following section). Because the search is greedy, the first valid alignment encountered by Bowtie will not necessarily be the 'best' in terms of number of mismatches or in terms of quality. The user may instruct Bowtie to continue searching until it can prove that any alignment it reports is 'best' in terms of number of mismatches (using the option --best). In our experience, this mode is two to three times slower than the default mode. We expect that the faster default mode will be preferred for large re-sequencing projects. The user may also opt for Bowtie to report all alignments up to a specified number (option -k) or all alignments with no limit on the number (option -a) for a given read. If in the course of its search Bowtie finds N possible alignments for a given set of substitutions, but the user has requested only K alignments where K < N, Bowtie will report K of the N alignments selected at random. Note that these modes can be much slower than the default. In our experience, for example, -k 1 is more than twice as fast as -k 2. Excessive backtracking The aligner as described so far can, in some cases, encounter sequences that cause excessive backtracking. This occurs when the aligner spends most of its effort fruitlessly backtracking to positions close to the 3' end of the query. Bowtie mitigates excessive backtracking with the novel technique of 'double indexing'. Two indices of the genome are created: one containing the BWT of the genome, called the 'forward' index, and a second containing the BWT of the genome with its character sequence reversed (not reverse complemented) called the 'mirror' index. To see how this helps, consider a matching policy that allows one mismatch in the alignment. A valid alignment with one mismatch falls into one of two cases according to which half of the read contains the mismatch. Bowtie proceeds in two phases corresponding to those two cases. Phase 1 loads the forward index into memory and invokes the aligner with the constraint that it may not substitute at positions in the query's right half. Phase 2 uses the mirror index and invokes the aligner on the reversed query, with the constraint that the aligner may not substitute at positions in the reversed query's right half (the original query's left half). The constraints on backtracking into the right half prevent excessive backtracking, whereas the use of two phases and two indices maintains full sensitivity. Unfortunately, it is not possible to avoid excessive backtracking fully when alignments are permitted to have two or more mismatches. In our experiments, we have observed that excessive backtracking is significant only when a read has many low-quality positions and does not align or aligns poorly to the reference. These cases can trigger in excess of 200 backtracks per read because there are many legal combinations of low-quality positions to be explored before all possibilities are exhausted. We mitigate this cost by enforcing a limit on the number of backtracks allowed before a search is terminated (default: 125). The limit prevents some legitimate, low-quality alignments from being reported, but we expect that this is a desirable trade-off for most applications. Phased Maq-like search Bowtie allows the user to select the number of mismatches permitted (default: two) in the high-quality end of a read (default: the first 28 bases) as well as the maximum acceptable quality distance of the overall alignment (default: 70). Quality values are assumed to follow the definition in PHRED [24], where p is the probability of error and Q = -10log p. Both the read and its reverse complement are candidates for alignment to the reference. For clarity, this discussion considers only the forward orientation. See Additional data file 1 (Supplementary Discussion 2) for an explanation of how the reverse complement is incorporated. The first 28 bases on the high-quality end of the read are termed the 'seed'. The seed consists of two halves: the 14 bp on the high-quality end (usually the 5' end) and the 14 bp on the low-quality end, termed the 'hi-half' and the 'lo-half', respectively. Assuming the default policy (two mismatches permitted in the seed), a reportable alignment will fall into one of four cases: no mismatches in seed (case 1); no mismatches in hi-half, one or two mismatches in lo-half (case 2); no mismatches in lo-half, one or two mismatches in hi-half (case 3); and one mismatch in hi-half, one mismatch in lo-half (case 4). All cases allow any number of mismatches in the nonseed part of the read and all cases are also subject to the quality distance constraint. The Bowtie algorithm consists of three phases that alternate between using the forward and mirror indices, as illustrated in Figure 3. Phase 1 uses the mirror index and invokes the aligner to find alignments for cases 1 and 2. Phases 2 and 3 cooperate to find alignments for case 3: Phase 2 finds partial alignments with mismatches only in the hi-half and phase 3 attempts to extend those partial alignments into full alignments. Finally, phase 3 invokes the aligner to find alignments for case 4. Figure 3 The three phases of the Bowtie algorithm for the Maq-like policy. A three-phase approach finds alignments for two-mismatch cases 1 to 4 while minimizing backtracking. Phase 1 uses the mirror index and invokes the aligner to find alignments for cases 1 and 2. Phases 2 and 3 cooperate to find alignments for case 3: Phase 2 finds partial alignments with mismatches only in the hi-half, and phase 3 attempts to extend those partial alignments into full alignments. Finally, phase 3 invokes the aligner to find alignments for case 4. Performance results We evaluated the performance of Bowtie using reads from the 1,000 Genomes project pilot (National Center for Biotechnology Information [NCBI] Short Read Archive:SRR001115). A total of 8.84 million reads, about one lane of data from an Illumina instrument, were trimmed to 35 bp and aligned to the human reference genome [NCBI build 36.3]. Unless specified otherwise, read data are not filtered or modified (besides trimming) from how they appear in the archive. This leads to about 70% to 75% of reads aligning somewhere to the genome. In our experience, this is typical for raw data from the archive. More aggressive filtering leads to higher alignment rates and faster alignment. All runs were performed on a single CPU. Bowtie speedups were calculated as a ratio of wall-clock alignment times. Both wall-clock and CPU times are given to demonstrate that input/output load and CPU contention are not significant factors. The time required to build the Bowtie index was not included in the Bowtie running times. Unlike competing tools, Bowtie can reuse a pre-computed index for the reference genome across many alignment runs. We anticipate most users will simply download such indices from a public repository. The Bowtie site [25] provides indices for current builds of the human, chimp, mouse, dog, rat, and Arabidopsis thaliana genomes, as well as many others. Results were obtained on two hardware platforms: a desktop workstation with 2.4 GHz Intel Core 2 processor and 2 GB of RAM; and a large-memory server with a four-core 2.4 GHz AMD Opteron processor and 32 GB of RAM. These are denoted 'PC' and 'server', respectively. Both PC and server run Red Hat Enterprise Linux AS release 4. Comparison to SOAP and Maq Maq is a popular aligner [1,4,5,26,27] that is among the fastest competing open source tools for aligning millions of Illumina reads to the human genome. SOAP is another open source tool that has been reported and used in short-read projects [6,28]. Table 1 presents the performance and sensitivity of Bowtie v0.9.6, SOAP v1.10, and Maq v0.6.6. SOAP could not be run on the PC because SOAP's memory footprint exceeds the PC's physical memory. The 'soap.contig' version of the SOAP binary was used. For comparison with SOAP, Bowtie was invoked with '-v 2' to mimic SOAP's default matching policy (which allows up to two mismatches in the alignment and disregards quality values), and with '--maxns 5' to simulate SOAP's default policy of filtering out reads with five or more no-confidence bases. For the Maq comparison Bowtie is run with its default policy, which mimics Maq's default policy of allowing up to two mismatches in the first 28 bases and enforcing an overall limit of 70 on the sum of the quality values at all mismatched read positions. To make Bowtie's memory footprint more comparable to Maq's, Bowtie is invoked with the '-z' option in all experiments to ensure that only the forward or mirror index is resident in memory at one time. The number of reads aligned indicates that SOAP (67.3%) and Bowtie -v 2 (67.4%) have comparable sensitivity. Of the reads aligned by either SOAP or Bowtie, 99.7% were aligned by both, 0.2% were aligned by Bowtie but not SOAP, and 0.1% were aligned by SOAP but not Bowtie. Maq (74.7%) and Bowtie (71.9%) also have roughly comparable sensitivity, although Bowtie lags by 2.8%. Of the reads aligned by either Maq or Bowtie, 96.0% were aligned by both, 0.1% were aligned by Bowtie but not Maq, and 3.9% were aligned by Maq but not Bowtie. Of the reads mapped by Maq but not Bowtie, almost all are due to a flexibility in Maq's alignment algorithm that allows some alignments to have three mismatches in the seed. The remainder of the reads mapped by Maq but not Bowtie are due to Bowtie's backtracking ceiling. Maq's documentation mentions that reads containing 'poly-A artifacts' can impair Maq's performance. Table 2 presents performance and sensitivity of Bowtie and Maq when the read set is filtered using Maq's 'catfilter' command to eliminate poly-A artifacts. The filter eliminates 438,145 out of 8,839,010 reads. Other experimental parameters are identical to those of the experiments in Table 1, and the same observations about the relative sensitivity of Bowtie and Maq apply here. Read length and performance As sequencing technology improves, read lengths are growing beyond the 30-bp to 50-bp commonly seen in public databases today. Bowtie, Maq, and SOAP support reads of lengths up to 1,024, 63, and 60 bp, respectively, and Maq versions 0.7.0 and later support read lengths up to 127 bp. Table 3 shows performance results when the three tools are each used to align three sets of 2 M untrimmed reads, a 36-bp set, a 50-bp set and a 76-bp set, to the human genome on the server platform. Each set of 2 M is randomly sampled from a larger set (NCBI Short Read Archive: SRR003084 for 36-bp, SRR003092 for 50-bp, SRR003196 for 76-bp). Reads were sampled such that the three sets of 2 M have uniform per-base error rate, as calculated from per-base Phred qualities. All reads pass through Maq's 'catfilter'. Table 3 Varying read length using Bowtie, Maq and SOAP Length Program CPU time Wall clock time Peak virtual memory footprint (megabytes) Bowtie speed-up Reads aligned (%) 36 bp Bowtie 6 m 15 s 6 m 21 s 1,305 - 62.2 Maq 3 h 52 m 26 s 3 h 52 m 54 s 804 36.7× 65.0 Bowtie -v 2 4 m 55 s 5 m 00 s 1,138 - 55.0 SOAP 16 h 44 m 3 s 18 h 1 m 38 s 13,619 216× 55.1 50 bp Bowtie 7 m 11 s 7 m 20 s 1,310 - 67.5 Maq 2 h 39 m 56 s 2 h 40 m 9 s 804 21.8× 67.9 Bowtie -v 2 5 m 32 s 5 m 46 s 1,138 - 56.2 SOAP 48 h 42 m 4 s 66 h 26 m 53 s 13,619 691× 56.2 76 bp Bowtie 18 m 58 s 19 m 6 s 1,323 - 44.5 Maq 0.7.1 4 h 45 m 7 s 4 h 45 m 17 s 1,155 14.9× 44.9 Bowtie -v 2 7 m 35 s 7 m 40 s 1,138 - 31.7 The performance of Bowtie v0.9.6, SOAP v1.10, and Maq versions v0.6.6 and v0.7.1 on the server platform when aligning 2 M untrimmed reads from the 1,000 Genome project (National Center for Biotechnology Information Short Read Archive: SRR003084 for 36 base pairs [bp], SRR003092 for 50 bp, and SRR003196 for 76 bp). For each read length, the 2 M reads were randomly sampled from the FASTQ file downloaded from the Archive such that the average per-base error rate as measured by quality values was uniform across the three sets. All reads pass through Maq's "catfilter". Maq v0.7.1 was used for the 76-bp reads because v0.6.6 does not support reads longer than 63 bp. SOAP is excluded from the 76-bp experiment because it does not support reads longer than 60 bp. Other experimental parameters are identical to those of the experiments in Table 1. CPU, central processing unit. Bowtie is run both in its Maq-like default mode and in its SOAP-like '-v 2' mode. Bowtie is also given the '-z' option to ensure that only the forward or mirror index is resident in memory at one time. Maq v0.7.1 was used instead of Maq v0.6.6 for the 76-bp set because v0.6.6 cannot align reads longer than 63 bp. SOAP was not run on the 76-bp set because it does not support reads longer than 60 bp. The results show that Maq's algorithm scales better overall to longer read lengths than Bowtie or SOAP. However, Bowtie in SOAP-like '-v 2' mode also scales very well. Bowtie in its default Maq-like mode scales well from 36-bp to 50-bp reads but is substantially slower for 76-bp reads, although it is still more than an order of magnitude faster than Maq. Parallel performance Alignment can be parallelized by distributing reads across concurrent search threads. Bowtie allows the user to specify a desired number of threads (option -p); Bowtie then launches the specified number of threads using the pthreads library. Bowtie threads synchronize with each other when fetching reads, outputting results, switching between indices, and performing various forms of global bookkeeping, such as marking a read as 'done'. Otherwise, threads are free to operate in parallel, substantially speeding up alignment on computers with multiple processor cores. The memory image of the index is shared by all threads, and so the footprint does not increase substantially when multiple threads are used. Table 4 shows performance results for running Bowtie v0.9.6 on the four-core server with one, two, and four threads. Table 4 Bowtie parallel alignment performance CPU time Wall clock time Reads mapped per hour (millions) Peak virtual memory footprint (megabytes) Speedup Bowtie, one thread 18 m 19 s 18 m 46 s 28.3 1,353 - Bowtie, two threads 20 m 34 s 10 m 35 s 50.1 1,363 1.77× Bowtie, four threads 23 m 9 s 6 m 1 s 88.1 1,384 3.12× Performance results for running Bowtie v0.9.6 on the four-core server with one, two, and four threads. Other experimental parameters are identical to those of the experiments in Table 1. CPU, central processing unit. Index building Bowtie uses a flexible indexing algorithm [29] that can be configured to trade off between memory usage and running time. Table 5 illustrates this trade-off when indexing the entire human reference genome (NCBI build 36.3, contigs). Runs were performed on the server platform. The indexer was run four times with different upper limits on memory usage. Table 5 Bowtie index building performance Physical memory target (GB) Actual peak memory footprint (GB) Wall clock time 16 14.4 4 h 36 m 8 5.84 5 h 5 m 4 3.39 7 h 40 m 2 1.39 21 h 30 m Performance results and memory footprints of running the Bowtie v0.9.6 indexer on the whole human genome (National Center for Biotechnology Information build 36.3, contigs). Runs were performed on the server platform. The indexer was run four times with different upper limits on memory usage. See Additional data file 1 (Supplementary Discussion 3 and Supplementary Table 1) for details. The reported times compare favorably with alignment times of competing tools that perform indexing during alignment. Less than 5 hours is required for Bowtie to both build and query a whole-human index with 8.84 million reads from the 1,000 Genome project (NCBI Short Read Archive:SRR001115) on a server, more than sixfold faster than the equivalent Maq run. The bottom-most row illustrates that the Bowtie indexer, with appropriate arguments, is memory-efficient enough to run on a typical workstation with 2 GB of RAM. Additional data file 1 (Supplementary discussions 3 and 4) explains the algorithm and the contents of the resulting index. Software Bowtie is written in C++ and uses the SeqAn library [30]. The converter to the Maq mapping format uses code from Maq. Discussion Bowtie exhibits a large performance advantage over both Maq and SOAP when mapping reads to the human genome. Bowtie's sensitivity in terms of reads aligned is comparable to that of SOAP and slightly less than Maq's, although the user may use command-line options to trade slower running time for greater sensitivity. Unlike SOAP, Bowtie's 1.3 GB memory footprint allows it to run on a typical PC with 2 GB of RAM. Bowtie aligns Illumina reads to the human genome at a rate of over 25 million reads per hour. Multiple processor cores can run parallel Bowtie threads to achieve even greater alignment speed; experiments show a speed up of 3.12 for four threads on a typical Opteron server. Unlike many other short-read aligners, Bowtie creates a permanent index of the reference that may be re-used across alignment runs. Building the index is fast - Bowtie outperforms competing tools when aligning lanes of Illumina reads even with index construction time included. At 2.2 GB for the human genome, the on-disk size of a Bowtie index is small enough to distribute over the internet. The Bowtie website hosts pre-built indices for the human genome and several other model organisms including chimp, dog, rat, mouse, and chicken. Bowtie's speed and small memory footprint are due chiefly to its use of the Burrows-Wheeler index in combination with the novel, quality-aware, backtracking algorithm introduced here. Double indexing is used to avoid the performance penalty of excessive backtracking. Bowtie supports standard FASTQ and FASTA input formats, and comes with a conversion program that allows Bowtie output to be used with Maq's consensus generator and single nucleotide polymorphism caller. Bowtie does not yet support paired-end alignment or alignments with insertions or deletions, although both improvements are planned for the future. Paired-end alignment is not difficult to implement in Bowtie's framework, and we expect that Bowtie's performance advantage will be comparable to, though perhaps somewhat less than, that of unpaired alignment mode. Support for insertions and deletions is also a conceptually straightforward addition. Bowtie is free, open source software available from the Bowtie website [25]. Abbreviations bp: base pair; BWT: Burrows-Wheeler transform; CPU: central processing unit; FM: full-text minute-space; GB: gigabytes; LF: last first; NCBI: National Center for Biotechnology Information. Authors' contributions BL developed the algorithms, collected results, and wrote most of the software. CT wrote some of the software. CT and MP contributed to discussions on algorithms. BL, CT, MP, and SLS wrote the manuscript. Additional data files The following additional data are included with the online version of this article: a document containing supplementary discussions, tables, and figures pertaining to algorithms for navigating the Burrows-Wheeler transform, the full four-phase version of the alignment algorithm that incorporates the reverse-complement, index construction, and components of the index (Additional data file 1). Supplementary Material Additional data file 1 Presented are supplementary discussions, tables, and figures pertaining to algorithms for navigating the Burrows-Wheeler transform, the full four-phase version of the alignment algorithm that incorporates the reverse-complement, index construction, and components of the index. Click here for file
            Bookmark
            • Record: found
            • Abstract: found
            • Article: found
            Is Open Access

            MEME Suite: tools for motif discovery and searching

            The MEME Suite web server provides a unified portal for online discovery and analysis of sequence motifs representing features such as DNA binding sites and protein interaction domains. The popular MEME motif discovery algorithm is now complemented by the GLAM2 algorithm which allows discovery of motifs containing gaps. Three sequence scanning algorithms—MAST, FIMO and GLAM2SCAN—allow scanning numerous DNA and protein sequence databases for motifs discovered by MEME and GLAM2. Transcription factor motifs (including those discovered using MEME) can be compared with motifs in many popular motif databases using the motif database scanning algorithm Tomtom. Transcription factor motifs can be further analyzed for putative function by association with Gene Ontology (GO) terms using the motif-GO term association tool GOMO. MEME output now contains sequence LOGOS for each discovered motif, as well as buttons to allow motifs to be conveniently submitted to the sequence and motif database scanning algorithms (MAST, FIMO and Tomtom), or to GOMO, for further analysis. GLAM2 output similarly contains buttons for further analysis using GLAM2SCAN and for rerunning GLAM2 with different parameters. All of the motif-based tools are now implemented as web services via Opal. Source code, binaries and a web server are freely available for noncommercial use at http://meme.nbcr.net.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Origin, biogenesis, and activity of plant microRNAs.

              MicroRNAs (miRNAs) are key posttranscriptional regulators of eukaryotic gene expression. Plants use highly conserved as well as more recently evolved, species-specific miRNAs to control a vast array of biological processes. This Review discusses current advances in our understanding of the origin, biogenesis, and mode of action of plant miRNAs and draws comparisons with their metazoan counterparts.
                Bookmark

                Author and article information

                Journal
                Front Plant Sci
                Front Plant Sci
                Front. Plant Sci.
                Frontiers in Plant Science
                Frontiers Media S.A.
                1664-462X
                07 December 2012
                2012
                : 3
                : 272
                Affiliations
                [1] 1Max Planck Institute for Molecular Plant Physiology Potsdam-Golm, Germany
                Author notes

                Edited by: Bjoern Usadel, RWTH Aachen University, Germany

                Reviewed by: Korbinian Schneeberger, Max Planck Institute for Plant Breeding Research, Germany; Federico M. Giorgi, Istituto di Genomica Applicata, Italy

                *Correspondence: Dirk Walther, Max Planck Institute for Molecular Plant Physiology, Am Mühlenberg 1, 14476 Potsdam-Golm, Germany. e-mail: walther@ 123456mpimp-golm.mpg.de ; thieme@ 123456mpimp-golm.mpg.de

                This article was submitted to Frontiers in Plant Systems Biology, a specialty of Frontiers in Plant Science.

                Article
                10.3389/fpls.2012.00272
                3516803
                23233858
                8e216882-04b6-443e-aee4-c803f26d7507
                Copyright © 2012 Thieme, Schudoma, May and Walther.

                This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in other forums, provided the original authors and source are credited and subject to any copyright notices concerning any third-party graphics etc.

                History
                : 14 September 2012
                : 19 November 2012
                Page count
                Figures: 7, Tables: 2, Equations: 1, References: 74, Pages: 15, Words: 12376
                Categories
                Plant Science
                Original Research

                Plant science & Botany
                arabidopsis thaliana,mirna,argonaute proteins,sorting,rna-protein interaction,machine learning,random forests,mutual information

                Comments

                Comment on this article