Vacancy Engineering in Semiconductor Photocatalysts: Implications in Hydrogen Evolution and Nitrogen Fixation Applications

When used as a photocatalyst, titanium dioxide (TiO(2)) absorbs only ultraviolet light, and several approaches, including the use of dopants such as nitrogen, have been taken to narrow the band gap of TiO(2). We demonstrated a conceptually different approach to enhancing solar absorption by introducing disorder in the surface layers of nanophase TiO(2) through hydrogenation. We showed that disorder-engineered TiO(2) nanocrystals exhibit substantial solar-driven photocatalytic activities, including the photo-oxidation of organic molecules in water and the production of hydrogen with the use of a sacrificial reagent.

Since the 1970s, splitting water using solar energy has been a focus of great attention as a possible means for converting solar energy to chemical energy in the form of clean and renewable hydrogen fuel. Approaches to solar water splitting include photocatalytic water splitting with homogeneous or heterogeneous photocatalysts, photoelectrochemical or photoelectrocatalytic (PEC) water splitting with a PEC cell, and electrolysis of water with photovoltaic cells coupled to electrocatalysts. Though many materials are capable of photocatalytically producing hydrogen and/or oxygen, the overall energy conversion efficiency is still low and far from practical application. This is mainly due to the fact that the three crucial steps for the water splitting reaction: solar light harvesting, charge separation and transportation, and the catalytic reduction and oxidation reactions, are not efficient enough or simultaneously. Water splitting is a thermodynamically uphill reaction, requiring transfer of multiple electrons, making it one of the most challenging reactions in chemistry. This Account describes the important roles of cocatalysts in photocatalytic and PEC water splitting reactions. For semiconductor-based photocatalytic and PEC systems, we show that loading proper cocatalysts, especially dual cocatalysts for reduction and oxidation, on semiconductors (as light harvesters) can significantly enhance the activities of photocatalytic and PEC water splitting reactions. Loading oxidation and/or reduction cocatalysts on semiconductors can facilitate oxidation and reduction reactions by providing the active sites/reaction sites while suppressing the charge recombination and reverse reactions. In a PEC water splitting system, the water oxidation and reduction reactions occur at opposite electrodes, so cocatalysts loaded on the electrode materials mainly act as active sites/reaction sites spatially separated as natural photosynthesis does. In both cases, the nature of the loaded cocatalysts and their interaction with the semiconductor through the interface/junction are important. The cocatalyst can provide trapping sites for the photogenerated charges and promote the charge separation, thus enhancing the quantum efficiency; the cocatalysts could improve the photostability of the catalysts by timely consuming of the photogenerated charges, particularly the holes; most importantly, the cocatalysts catalyze the reactions by lowering the activation energy. Our research shows that loading suitable dual cocatalysts on semiconductors can significantly increase the photocatalytic activities of hydrogen and oxygen evolution reactions, and even make the overall water splitting reaction possible. All of these findings suggest that dual cocatalysts are necessary for developing highly efficient photocatalysts for water splitting reactions.

Solar-driven water splitting provides a leading approach to store the abundant yet intermittent solar energy and produce hydrogen as a clean and sustainable energy carrier. A straightforward route to light-driven water splitting is to apply self-supported particulate photocatalysts, which is expected to allow solar hydrogen to be competitive with fossil-fuel-derived hydrogen on a levelized cost basis. More importantly, the powder-based systems can lend themselves to making functional panels on a large scale while retaining the intrinsic activity of the photocatalyst. However, all attempts to generate hydrogen via powder-based solar water-splitting systems to date have unfortunately fallen short of the efficiency values required for practical applications. Photocatalysis on photocatalyst particles involves three sequential steps: (i) absorption of photons with higher energies than the bandgap of the photocatalysts, leading to the excitation of electron-hole pairs in the particles, (ii) charge separation and migration of these photoexcited carriers, and (iii) surface chemical reactions based on these carriers. In this review, we focus on the challenges of each step and summarize material design strategies to overcome the obstacles and limitations. This review illustrates that it is possible to employ the fundamental principles underlying photosynthesis and the tools of chemical and materials science to design and prepare photocatalysts for overall water splitting.