16
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Label-free imaging of bone multiscale porosity and interfaces using third-harmonic generation microscopy

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Interfaces provide the structural basis of essential bone functions. In the hierarchical structure of bone tissue, heterogeneities such as porosity or boundaries are found at scales ranging from nanometers to millimeters, all of which contributing to macroscopic properties. To date, however, the complexity or limitations of currently used imaging methods restrict our understanding of this functional integration. Here we address this issue using label-free third-harmonic generation (THG) microscopy. We find that the porous lacuno-canalicular network (LCN), revealing the geometry of osteocytes in the bone matrix, can be directly visualized in 3D with submicron precision over millimetric fields of view compatible with histology. THG also reveals interfaces delineating volumes formed at successive remodeling stages. Finally, we show that the structure of the LCN can be analyzed in relation with that of the extracellular matrix and larger-scale structures by simultaneously recording THG and second-harmonic generation (SHG) signals relating to the collagen organization.

          Related collections

          Most cited references53

          • Record: found
          • Abstract: not found
          • Article: not found

          Bone histomorphometry: standardization of nomenclature, symbols, and units. Report of the ASBMR Histomorphometry Nomenclature Committee.

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Biomimetic materials research: what can we really learn from nature's structural materials?

            Nature provides a wide range of materials with different functions and which may serve as a source of bio-inspiration for the materials scientist. The article takes the point of view that a successful translation of these ideas into the technical world requires more than the observation of nature. A thorough analysis of structure-function relations in natural tissues must precede the engineering of new bio-inspired materials. There are, indeed, many opportunities for lessons from the biological world: on growth and functional adaptation, about hierarchical structuring, on damage repair and self-healing. Biomimetic materials research is becoming a rapidly growing and enormously promising field. Serendipitous discovery from the observation of nature will be gradually replaced by a systematic approach involving the study of natural tissues in materials laboratories, the application of engineering principles to the further development of bio-inspired ideas and the generation of specific databases.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Lamellar bone: structure-function relations.

              The term "bone" refers to a family of materials that have complex hierarchically organized structures. These structures are primarily adapted to the variety of mechanical functions that bone fulfills. Here we review the structure-mechanical relations of one bone structural type, lamellar bone. This is the most abundant type in many mammals, including humans. A lamellar unit is composed of five sublayers. Each sublayer is an array of aligned mineralized collagen fibrils. The orientations of these arrays differ in each sublayer with respect to both collagen fibril axes and crystal layers, such that a complex rotated plywood-like structure is formed. Specific functions for lamellar bone, as opposed to the other bone types, could not be identified. It is therefore proposed that the lamellar structure is multifunctional-the "concrete" of the bone family of materials. Experimentally measured mechanical properties of lamellar bone demonstrate a clear-cut anisotropy with respect to the axis direction of long bones. A comparison of the elastic and ultimate properties of parallel arrays of lamellar units formed in primary bone with cylindrically shaped osteonal structures in secondary formed bone shows that most of the intrinsic mechanical properties are built into the lamellar structure. The major advantages of osteonal bone are its fracture properties. Mathematical modeling of the elastic properties based on the lamellar structure and using a rule-of-mixtures approach can closely simulate the measured mechanical properties, providing greater insight into the structure-mechanical relations of lamellar bone.
                Bookmark

                Author and article information

                Contributors
                delphine.debarre@univ-grenoble-alpes.fr
                Journal
                Sci Rep
                Sci Rep
                Scientific Reports
                Nature Publishing Group UK (London )
                2045-2322
                13 June 2017
                13 June 2017
                2017
                : 7
                : 3419
                Affiliations
                [1 ]ISNI 0000 0000 9272 9931, GRID grid.462689.7, , Univ. Grenoble Alpes, LIPHY, ; F-38000 Grenoble, France
                [2 ]ISNI 0000 0001 2112 9282, GRID grid.4444.0, , CNRS, LIPHY, ; F-38000 Grenoble, France
                [3 ]ISNI 0000 0004 4910 6535, GRID grid.460789.4, LOB, Ecole Polytechnique, CNRS, Inserm, , Université Paris-Saclay, ; F-91120 Palaiseau, France
                [4 ]ISNI 0000 0004 1765 5089, GRID grid.15399.37, Université de Lyon, CREATIS, CNRS UMR5220, , Inserm U1206, INSA-Lyon, Université Claude Bernard, ; Lyon 1, France
                [5 ]ISNI 0000 0004 0641 6373, GRID grid.5398.7, , ESRF, European Synchrotron Radiation Facility, ; F-38000 Grenoble, France
                [6 ]ISNI 0000 0001 2172 4233, GRID grid.25697.3f, , INSERM, UMR 1033, Univ Lyon, ; Université Claude Bernard Lyon 1, F-69008 Lyon, France
                [7 ]ISNI 0000 0001 2172 4233, GRID grid.25697.3f, , Université de Lyon, ; F-69008 Lyon, France
                Author information
                http://orcid.org/0000-0002-2082-8214
                http://orcid.org/0000-0003-3026-8932
                http://orcid.org/0000-0001-9526-5746
                Article
                3548
                10.1038/s41598-017-03548-5
                5469828
                28611441
                91c8936e-1712-4b3d-90c0-19ee8dd9dcc5
                © The Author(s) 2017

                Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

                History
                : 7 November 2016
                : 2 May 2017
                Categories
                Article
                Custom metadata
                © The Author(s) 2017

                Uncategorized
                Uncategorized

                Comments

                Comment on this article