+1 Recommend
0 collections
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Reconstructing the Origin of Oxygenic Photosynthesis: Do Assembly and Photoactivation Recapitulate Evolution?

      Read this article at

          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.


          Due to the great abundance of genomes and protein structures that today span a broad diversity of organisms, now more than ever before, it is possible to reconstruct the molecular evolution of protein complexes at an incredible level of detail. Here, I recount the story of oxygenic photosynthesis or how an ancestral reaction center was transformed into a sophisticated photochemical machine capable of water oxidation. First, I review the evolution of all reaction center proteins in order to highlight that Photosystem II and Photosystem I, today only found in the phylum Cyanobacteria, branched out very early in the history of photosynthesis. Therefore, it is very unlikely that they were acquired via horizontal gene transfer from any of the described phyla of anoxygenic phototrophic bacteria. Second, I present a new evolutionary scenario for the origin of the CP43 and CP47 antenna of Photosystem II. I suggest that the antenna proteins originated from the remodeling of an entire Type I reaction center protein and not from the partial gene duplication of a Type I reaction center gene. Third, I highlight how Photosystem II and Photosystem I reaction center proteins interact with small peripheral subunits in remarkably similar patterns and hypothesize that some of this complexity may be traced back to the most ancestral reaction center. Fourth, I outline the sequence of events that led to the origin of the Mn 4CaO 5 cluster and show that the most ancestral Type II reaction center had some of the basic structural components that would become essential in the coordination of the water-oxidizing complex. Finally, I collect all these ideas, starting at the origin of the first reaction center proteins and ending with the emergence of the water-oxidizing cluster, to hypothesize that the complex and well-organized process of assembly and photoactivation of Photosystem II recapitulate evolutionary transitions in the path to oxygenic photosynthesis.

          Related collections

          Most cited references 113

          • Record: found
          • Abstract: found
          • Article: found
          Is Open Access

          Fast, scalable generation of high-quality protein multiple sequence alignments using Clustal Omega

          Introduction Multiple sequence alignments (MSAs) are essential in most bioinformatics analyses that involve comparing homologous sequences. The exact way of computing an optimal alignment between N sequences has a computational complexity of O(L N ) for N sequences of length L making it prohibitive for even small numbers of sequences. Most automatic methods are based on the ‘progressive alignment' heuristic (Hogeweg and Hesper, 1984), which aligns sequences in larger and larger subalignments, following the branching order in a ‘guide tree.' With a complexity of roughly O(N 2), this approach can routinely make alignments of a few thousand sequences of moderate length, but it is tough to make alignments much bigger than this. The progressive approach is a ‘greedy algorithm' where mistakes made at the initial alignment stages cannot be corrected later. To counteract this effect, the consistency principle was developed (Notredame et al, 2000). This has allowed the production of a new generation of more accurate aligners (e.g. T-Coffee (Notredame et al, 2000)) but at the expense of ease of computation. These methods give 5–10% more accurate alignments, as measured on benchmarks, but are confined to a few hundred sequences. In this report, we introduce a new program called Clustal Omega, which is accurate but also allows alignments of almost any size to be produced. We have used it to generate alignments of over 190 000 sequences on a single processor in a few hours. In benchmark tests, it is distinctly more accurate than most widely used, fast methods and comparable in accuracy to some of the intensive slow methods. It also has powerful features for allowing users to reuse their alignments so as to avoid recomputing an entire alignment, every time new sequences become available. The key to making the progressive alignment approach scale is the method used to make the guide tree. Normally, this involves aligning all N sequences to each other giving time and memory requirements of O(N 2). Protein families with >50 000 sequences are appearing and will become common from various wide scale genome sequencing projects. Currently, the only method that can routinely make alignments of more than about 10 000 sequences is MAFFT/PartTree (Katoh and Toh, 2007). It is very fast but leads to a loss in accuracy, which has to be compensated for by iteration and other heuristics. With Clustal Omega, we use a modified version of mBed (Blackshields et al, 2010), which has complexity of O(N log N), and which produces guide trees that are just as accurate as those from conventional methods. mBed works by ‘emBedding' each sequence in a space of n dimensions where n is proportional to log N. Each sequence is then replaced by an n element vector, where each element is simply the distance to one of n ‘reference sequences.' These vectors can then be clustered extremely quickly by standard methods such as K-means or UPGMA. In Clustal Omega, the alignments are then computed using the very accurate HHalign package (Söding, 2005), which aligns two profile hidden Markov models (Eddy, 1998). Clustal Omega has a number of features for adding sequences to existing alignments or for using existing alignments to help align new sequences. One innovation is to allow users to specify a profile HMM that is derived from an alignment of sequences that are homologous to the input set. The sequences are then aligned to these ‘external profiles' to help align them to the rest of the input set. There are already widely available collections of HMMs from many sources such as Pfam (Finn et al, 2009) and these can now be used to help users to align their sequences. Results Alignment accuracy The standard method for measuring the accuracy of multiple alignment algorithms is to use benchmark test sets of reference alignments, generated with reference to three-dimensional structures. Here, we present results from a range of packages tested on three benchmarks: BAliBASE (Thompson et al, 2005), Prefab (Edgar, 2004) and an extended version of HomFam (Blackshields et al, 2010). For these tests, we just report results using the default settings for all programs but with two exceptions, which were needed to allow MUSCLE (Edgar, 2004) and MAFFT to align the biggest test cases in HomFam. For test cases with >3000 sequences, we run MUSCLE with the –maxiter parameter set to 2, in order to finish the alignments in reasonable times. Second, we have run several different programs from the MAFFT package. MAFFT (Katoh et al, 2002) consists of a series of programs that can be run separately or called automatically from a script with the --auto flag set. This flag chooses to run a slow, consistency-based program (L-INS-i) when the number and lengths of sequences is small. When the numbers exceed inbuilt thresholds, a conventional progressive aligner is used (FFT-NS-2). The latter is also the program that is run by default if MAFFT is called with no flags set. For very large data sets, the --parttree flag must be set on the command line and a very fast guide tree calculation is then used. The results for the BAliBASE benchmark tests are shown in Table I. BAliBASE is divided into six ‘references.' Average scores are given for each reference, along with total run times and average total column (TC) scores, which give the proportion of the total alignment columns that is recovered. A score of 1.0 indicates perfect agreement with the benchmark. There are two rows for the MAFFT package: MAFFT (auto) and MAFFT default. In most (203 out of 218) BAliBASE test cases, the number of sequences is small and the script runs L-INS-i, which is the slow accurate program that uses the consistency heuristic (Notredame et al, 2000) that is also used by MSAprobs (Liu et al, 2010), Probalign, Probcons (Do et al, 2005) and T-Coffee. These programs are all restricted to small numbers of sequences but tend to give accurate alignments. This is clearly reflected in the times and average scores in Table I. The times range from 25 min up to 22 h for these packages and the accuracies range from 55 to 61% of columns correct. Clustal Omega only takes 9 min for the same runs but has an accuracy level that is similar to that of Probcons and T-Coffee. The rest of the table is mainly taken by the programs that use progressive alignment. Some of these are very fast but this speed is matched by a considerable drop in accuracy compared with the consistency-based programs and Clustal Omega. The weakest program here, is Clustal W (Larkin et al, 2007) followed by PRANK (Löytynoja and Goldman, 2008). PRANK is not designed for aligning distantly related sequences but at giving good alignments for phylogenetic work with special attention to gaps. These gap positions are not included in these tests as they tend not to be structurally conserved. Dialign (Morgenstern et al, 1998) does not use consistency or progressive alignment but is based on finding best local multiple alignments. FSA (Bradley et al, 2009) uses sampling of pairwise alignments and ‘sequence annealing' and has been shown to deliver good nucleotide sequence alignments in the past. The Prefab benchmark test results are shown in Table II. Here, the results are divided into five groups according to the percent identity of the sequences. The overall scores range from 53 to 73% of columns correct. The consistency-based programs MSAprobs, MAFFT L-INS-i, Probalign, Probcons and T-Coffee, are again the most accurate but with long run times. Clustal Omega is close to the consistency programs in accuracy but is much faster. There is then a gap to the faster progressive based programs of MUSCLE, MAFFT, Kalign (Lassmann and Sonnhammer, 2005) and Clustal W. Results from testing large alignments with up to 50 000 sequences are given in Table III using HomFam. Here, each alignment is made up of a core of a Homstrad (Mizuguchi et al, 1998) structure-based alignment of at least five sequences. These sequences are then inserted into a test set of sequences from the corresponding, homologous, Pfam domain. This gives very large sets of sequences to be aligned but the testing is only carried out on the sequences with known structures. Only some programs are able to deliver alignments at all, with data sets of this size. We restricted the comparisons to Clustal Omega, MAFFT, MUSCLE and Kalign. MAFFT with default settings, has a limit of 20 000 sequences and we only use MAFFT with --parttree for the last section of Table III. MUSCLE becomes increasingly slow when you get over 3000 sequences. Therefore, for >3000 sequences we used MUSCLE with the faster but less accurate setting of –maxiters 2, which restricts the number of iterations to two. Overall, Clustal Omega is easily the most accurate program in Table III. The run times show MAFFT default and Kalign to be exceptionally fast on the smaller test cases and MAFFT --parttree to be very fast on the biggest families. Clustal Omega does scale well, however, with increasing numbers of sequences. This scaling is described in more detail in the Supplementary Information. We do have two further test cases with >50 000 sequences, but it was not possible to get results for these from MUSCLE or Kalign. These are described in the Supplementary Information as well. Table III gives overall run times for the four programs evaluated with HomFam. Figure 1 resolves these run times case by case. Kalign is very fast for small families but does not scale as well. Overall, MAFFT is faster than the other programs over all test case sizes but Clustal Omega scales similarly. Points in Figure 1 represent different families with different average sequence lengths and pairwise identities. Therefore, the scalability trend is fuzzy, with larger dots occurring generally above smaller dots. Supplementary Figure S3 shows scalability data, where subsets of increasing size are sampled from one large family only. This reduces variability in pairwise identity and sequence length. External profile alignment Clustal Omega can read extra information from a profile HMM derived from preexisting alignments. For example, if a user wishes to align a set of globin sequences and has an existing globin alignment, this alignment can be converted to a profile HMM and used as well as the sequence input file. This HMM is here referred to as an ‘external profile' and its use in this way as ‘external profile alignment' (EPA). During EPA, each sequence in the input set is aligned to the external profile. Pseudocount information from the external profile is then transferred, position by position, to the input sequence. Ideally, this would be used with large curated alignments of particular proteins or domains of interest such as are used in metagenomics projects. Rather than taking the input sequences and aligning them from scratch, every time new sequences are found, the alignment should be carefully maintained and used as an external profile for EPA. Clustal Omega also can align sequences to existing alignments using conventional alignment methods. Users can add sequences to an alignment, one by one or align a set of aligned sequences to the alignment. In this paper, we demonstrate the EPA approach with two examples. First, we take the 94 HomFam test cases from the previous section and use the corresponding Pfam HMM for EPA. Before EPA, the average accuracy for the test cases was 0.627 of correctly aligned Homstrad positions but after EPA it rises to 0.653. This is plotted, test case for test case in Figure 2A. Each dot is one test case with the TC score for Clustal Omega plotted against the score using EPA. The second example is illustrated in Figure 2B. Here, we take all the BAliBASE reference sets and align them as normal using Clustal Omega and obtain the benchmark result of 0.554 of columns correctly aligned, as already reported in Table I. For EPA, we use the benchmark reference alignments themselves as external profiles. The results now jump to 0.857 of columns correct. This is a jump of over 30% and while it is not a valid measure of Clustal Omega accuracy for comparison with other programs, it does illustrate the potential power of EPA to use information in external alignments. Iteration EPA can also be used in a simple iteration scheme. Once a MSA has been made from a set of input sequences, it can be converted into a HMM and used for EPA to help realign the input sequences. This can also be combined with a full recalculation of the guide tree. In Figure 3, we show the results of one and two iterations on every test case from HomFam. The graph is plotted as a running average TC score for all test cases with N or fewer test cases where N is plotted on the horizontal axis using a log scale. With some smaller test cases, iteration actually has a detrimental effect. Once you get near 1000 or more sequences, however, a clear trend emerges. The more sequences you have, the more beneficial the effect of iteration is. With bigger test cases, it becomes more and more beneficial to apply two iterations. This result confirms the usefulness of EPA as a general strategy. It also confirms the difficulty in aligning extremely large numbers of sequences but gives one partial solution. It also gives a very simple but effective iteration scheme, not just for guide tree iteration, as used in many packages, but for iteration of the alignment itself. Discussion The main breakthroughs since the mid 1980s in MSA methods have been progressive alignment and the use of consistency. Otherwise, most recent work has concerned refinements for speed or accuracy on benchmark test sets. The speed increases have been dramatic but, with just two major exceptions, the methods are still basically O(N 2) and incapable of being extended to data sets of >10 000 sequences. The two exceptions are mBed, used here, and MAFFT PartTree. PartTree is faster but at the expense of accuracy, at least as judged by the benchmarking here. The second group of recent developments have concerned accuracy. This has tended to focus on results from benchmarking, a potentially contentious issue (Aniba et al, 2010; Edgar, 2010). The benchmark test sets that we have are limited in scope and heavily biased toward single domain globular proteins. This has the potential to lead to methods that behave well on benchmarks but which are not so flexible or useful in real-world situations. One development to improve accuracy has been the recruitment of extra homologs to bulk up input data sets. This seems to work well with the consistency-based methods and for small data sets. It appears, however, that there is a limit to the extra accuracy that can be obtained this way, without further development. The extra sequences may also bring in noise and dramatically increase the complexity of the computational problem. This can be partly fixed by iteration but, EPA to a high-quality reference alignment might be a better solution. This also raises the need for methods to visualize such large alignments, in order to detect problems. A second major focus for development has been the use of external information such as RNA structure (Wilm et al, 2008) or protein structure predictions (Pirovano et al, 2008). EPA is a new approach that allows users to exploit information in their own or in publicly available alignments. It does not force new sequences to follow the older alignment exactly. The new sequences get aligned to each other using progressive alignment but the information in the external profile can help provide information as to which amino acids are most likely to occur at each position in a sequence. Most methods attempt to predict this from general models of protein evolution with secondary structure prediction as a refinement. In this paper, we have shown that even using the mass produced alignments from Pfam as external profiles provides a small increase in accuracy for a large general set of test cases. This opens up a new set of possibilities for users to make use of the information contained in large, publicly available alignments and creates an incentive for database providers to make very high-quality alignments available. One of the reasons for the great success of Clustal X was the very user-friendly graphical user interface (GUI). This, however, is not as critical as in the past due to the widespread availability of web-based services where the GUI is provided by the web-based front-end server. Further, there are several very high-quality alignment viewers and editors such as Jalview (Clamp et al, 2004) and Seaview (Gouy et al, 2010) that read Clustal Omega output or which can call Clustal Omega directly. Materials and methods Clustal Omega is licensed under the GNU Lesser General Public License. Source code as well as precompiled binaries for Linux, FreeBSD, Windows and Mac (Intel and PowerPC) are available at Clustal Omega is available as a command line program only, which uses GNU-style command line options, and also accepts ClustalW-style command options for backwards compatibility and easy integration into existing pipelines. Clustal Omega is written in C and C++ and makes use of a number of excellent free software packages. We used a modified version of Sean Eddy's Squid library ( for sequence I/O, allowing the use of a wide variety of file formats. We use David Arthur's k-means++ code (Arthur and Vassilvitskii, 2007) for fast clustering of sequence vectors. Code for fast UPGMA and guide tree handling routines was adopted from MUSCLE (Edgar, 2004). We use the OpenMP library to enable multithreaded computation of pairwise distances and alignment match states. The documentation for Clustal Omega's API is part of the source code, and in addition is available from Full details of all algorithms are given in the accompanying Supplementary Information. The benchmarks that were used were BAliBASE 3 (Thompson et al, 2005), PREFAB 4.0 (posted March 2005) (Edgar, 2010) and a newly constructed data set (HomFam) using sequences from Pfam (version 25) and Homstrad (as of 2011-06-13) (Mizuguchi et al, 1998). The programs that were compared can be obtained from: ClustalW2, v2.1 ( DIALIGN 2.2.1 ( FSA 1.15.5 ( Kalign 2.04 ( MAFFT 6.857 ( MSAProbs 0.9.4 ( MUSCLE version 3.8.31 posted 1 May 2010 ( PRANK v.100802, 2 August 2010 ( Probalign v1.4 ( PROBCONS version 1.12 ( T-Coffee Version 8.99 ( Supplementary Material Supplementary Information Supplementary Figures S1–3 Review Process File
            • Record: found
            • Abstract: found
            • Article: not found

            Crystal structure of oxygen-evolving photosystem II at a resolution of 1.9 Å.

            Photosystem II is the site of photosynthetic water oxidation and contains 20 subunits with a total molecular mass of 350 kDa. The structure of photosystem II has been reported at resolutions from 3.8 to 2.9 Å. These resolutions have provided much information on the arrangement of protein subunits and cofactors but are insufficient to reveal the detailed structure of the catalytic centre of water splitting. Here we report the crystal structure of photosystem II at a resolution of 1.9 Å. From our electron density map, we located all of the metal atoms of the Mn(4)CaO(5) cluster, together with all of their ligands. We found that five oxygen atoms served as oxo bridges linking the five metal atoms, and that four water molecules were bound to the Mn(4)CaO(5) cluster; some of them may therefore serve as substrates for dioxygen formation. We identified more than 1,300 water molecules in each photosystem II monomer. Some of them formed extensive hydrogen-bonding networks that may serve as channels for protons, water or oxygen molecules. The determination of the high-resolution structure of photosystem II will allow us to analyse and understand its functions in great detail. ©2011 Macmillan Publishers Limited. All rights reserved
              • Record: found
              • Abstract: found
              • Article: not found

              Architecture of the photosynthetic oxygen-evolving center.

              Photosynthesis uses light energy to drive the oxidation of water at an oxygen-evolving catalytic site within photosystem II (PSII). We report the structure of PSII of the cyanobacterium Thermosynechococcus elongatus at 3.5 angstrom resolution. We have assigned most of the amino acid residues of this 650-kilodalton dimeric multisubunit complex and refined the structure to reveal its molecular architecture. Consequently, we are able to describe details of the binding sites for cofactors and propose a structure of the oxygen-evolving center (OEC). The data strongly suggest that the OEC contains a cubane-like Mn3CaO4 cluster linked to a fourth Mn by a mono-micro-oxo bridge. The details of the surrounding coordination sphere of the metal cluster and the implications for a possible oxygen-evolving mechanism are discussed.

                Author and article information

                Front Plant Sci
                Front Plant Sci
                Front. Plant Sci.
                Frontiers in Plant Science
                Frontiers Media S.A.
                02 March 2016
                : 7
                Department of Life Sciences, Imperial College London London, UK
                Author notes

                Edited by: Julian Eaton-Rye, University of Otago, New Zealand

                Reviewed by: Anthony William Larkum, University of Technology, Sydney, Australia; Martin Hohmann-Marriott, Norwegian University of Science and Technology, Norway

                *Correspondence: Tanai Cardona t.cardona@

                This article was submitted to Plant Cell Biology, a section of the journal Frontiers in Plant Science

                Copyright © 2016 Cardona.

                This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

                Page count
                Figures: 6, Tables: 0, Equations: 0, References: 116, Pages: 16, Words: 13956
                Funded by: Imperial College London 10.13039/501100000761
                Funded by: Biotechnology and Biological Sciences Research Council 10.13039/501100000268
                Award ID: BB/K002627/1
                Plant Science
                Hypothesis and Theory


                Comment on this article