8
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Controlled aqueous synthesis of ultra-long copper nanowires for stretchable transparent conducting electrode

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          A stretchable transparent electrode was achieved with rationally-controlled ultra-long copper nanowires and low-temperature direct spray coating.

          Abstract

          The environmentally benign synthesis of ultra-long copper nanowires with successful control of diameter and length for stretchable transparent conducting electrodes (TCEs) is reported. Ultra-long copper nanowires (CuNWs) with an average length of 92.5 μm (maximum length up to 260 μm) and an average diameter of 47 nm were synthesized using environmentally friendly water–alcohol mixtures and l-ascorbic acid as a reducing agent. A facile removal of insulating surface layers, such as organic capping molecules and copper oxide/hydroxide, by short-chain organic acid treatment allowed low contact resistance between the CuNWs without post-reductive treatment at elevated temperatures. The CuNWs were directly spray-coated on glass or polydimethylsiloxane (PDMS) at a low processing temperature of 130 °C. The CuNW TCE on a glass substrate exhibited a low sheet resistance of 23.1 Ohm sq −1 and a high optical transmittance of 84.1% at 550 nm. Furthermore, the CuNWs were directly spray-coated on stretchable PDMS, which showed a low sheet resistance of 4.1 Ohm sq −1 and a high optical transmittance of 70% at 550 nm.

          Related collections

          Most cited references48

          • Record: found
          • Abstract: found
          • Article: not found

          Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures.

          Transparent electrodes are a necessary component in many modern devices such as touch screens, LCDs, OLEDs, and solar cells, all of which are growing in demand. Traditionally, this role has been well served by doped metal oxides, the most common of which is indium tin oxide, or ITO. Recently, advances in nano-materials research have opened the door for other transparent conductive materials, each with unique properties. These include CNTs, graphene, metal nanowires, and printable metal grids. This review will explore the materials properties of transparent conductors, covering traditional metal oxides and conductive polymers initially, but with a focus on current developments in nano-material coatings. Electronic, optical, and mechanical properties of each material will be discussed, as well as suitability for various applications. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent Electrodes

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Self-limited plasmonic welding of silver nanowire junctions.

              Nanoscience provides many strategies to construct high-performance materials and devices, including solar cells, thermoelectrics, sensors, transistors, and transparent electrodes. Bottom-up fabrication facilitates large-scale chemical synthesis without the need for patterning and etching processes that waste material and create surface defects. However, assembly and contacting procedures still require further development. Here, we demonstrate a light-induced plasmonic nanowelding technique to assemble metallic nanowires into large interconnected networks. The small gaps that form naturally at nanowire junctions enable effective light concentration and heating at the point where the wires need to be joined together. The extreme sensitivity of the heating efficiency on the junction geometry causes the welding process to self-limit when a physical connection between the wires is made. The localized nature of the heating prevents damage to low-thermal-budget substrates such as plastics and polymer solar cells. This work opens new avenues to control light, heat and mass transport at the nanoscale.
                Bookmark

                Author and article information

                Journal
                JMCCCX
                Journal of Materials Chemistry C
                J. Mater. Chem. C
                Royal Society of Chemistry (RSC)
                2050-7526
                2050-7534
                2016
                2016
                : 4
                : 7
                : 1441-1447
                Affiliations
                [1 ]Department of Chemistry
                [2 ]Chung-Ang University
                [3 ]Seoul 156-756
                [4 ]Republic of Korea
                [5 ]Department of Chemistry Education
                [6 ]Seoul National University
                [7 ]Seoul
                [8 ]Department of Physics
                [9 ]Ulsan National Institute of Science and Technology (UNIST)
                [10 ]Ulsan 689-798
                [11 ]Convergence Components and Materials Research Laboratory
                [12 ]Electronics and Telecommunications Research Institute (ETRI)
                [13 ]Daejeon 305-700
                [14 ]Department of Graphic Arts Information Engineering
                [15 ]Pukyong National University
                [16 ]Busan 608-739
                Article
                10.1039/C5TC03614C
                a0d6157c-590a-4f89-89b5-6330f56a87a4
                © 2016
                History

                Comments

                Comment on this article