Evidence for strong flux pinning by small, dense nanoprecipitates in a Sm-doped YBa2Cu3O7−δ coated conductor

There are numerous potential applications for superconducting tapes, based on YBa2Cu3O7-x (YBCO) films coated onto metallic substrates. A long established goal of more than 15 years has been to understand the magnetic flux pinning mechanisms which allow films to maintain high current densities out to high magnetic fields. In fact, films carry 1-2 orders of magnitude higher current densities than any other form of the material. For this reason, the idea of further improving pinning has received little attention. Now that commercialisation of conductors is much closer, for both better performance and lower fabrication costs, an important goal is to achieve enhanced pinning in a practical way. In this work, we demonstrate a simple and industrially scaleable route which yields a 1.5 to 5-fold improvement in the in-field current densities of already-high-quality conductors.

Following the discovery of type-II high-temperature superconductors in 1986 (refs 1, 2), work has proceeded to develop these materials for power applications. One of the problems, however, has been that magnetic flux is not completely expelled, but rather is contained within magnetic fluxons, whose motion prevents larger supercurrents. It is known that the critical current of these materials can be enhanced by incorporating a high density of extended defects to act as pinning centres for the fluxons. YBa2Cu3O7 (YBCO or 123) is the most promising material for such applications at higher temperatures (liquid nitrogen). Pinning is optimized when the size of the defects approaches the superconducting coherence length ( approximately 2-4 nm for YBCO at temperatures < or =77 K) and when the areal number density of defects is of the order of (H/2) x 10(11) cm(-2), where H is the applied magnetic field in tesla. Such a high density has been difficult to achieve by material-processing methods that maintain a nanosize defect, except through irradiation. Here we report a method for achieving a dispersion of approximately 8-nm-sized nanoparticles in YBCO with a high number density, which increases the critical current (at 77 K) by a factor of two to three for high magnetic fields.

We present a comparative study of the angular dependent critical current density in YBa2Cu3O7 films deposited on IBAD MgO and on single crystal MgO and SrTiO3 substrates. We identify three angular regimes where pinning is dominated by different types of correlated and uncorrelated defects. We show that those regimes are present in all cases, indicating that the pinning mechanisms are the same, but their extension and characteristics are sample dependent, reflecting the quantitative differences in texture and defect density. In particular, the more defective nature of the films on IBAD turns into an advantage as it results in stronger vortex pinning, demonstrating that the critical current density of the films on single crystals is not an upper limit for the performance of the IBAD coated conductors.