6
views
0
recommends
+1 Recommend
1 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Assessment of cast steel anchorage fracture toughness of a cable-stayed bridge by small punch test Translated title: Evaluación de la tenacidad a la fractura de anclajes de aceros colados de un puente atirantado por ensayo miniatura de punzonamiento

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Abstract: The assessment of the residual lifetime of in-service structural components requires knowledge of fracture toughness values; however, conventional test methods for measuring fracture toughness demand the removal of large material samples from components, which generally is impractical. Recently, the Small Punch Test (SPT) (which utilizes nonstandard miniature specimens) has been used as a practical and convenient alternative for evaluating fracture toughness characteristics of the material of components in service. The purpose of this research was to find a correlation between the SPT equivalent fracture strain εqf and the fracture toughness JIC of low-alloy cast steels coming from anchorages of a cable-stayed bridge, which is located in the Gulf of México. Fracture toughness was calculated from KIC experimental data from previous work and equivalent fracture strain εqf was obtained by SPT using specimens 10×10 mm2 squares of 0.5 mm thickness. From εqf and JIC results and corresponding low-alloy steel experimental data from literature, a linear correlation was proposed to estimate fracture toughness from SPT equivalent fracture strain for cast steels belonging to this study case.

          Translated abstract

          Resumen: La evaluación de la vida residual de componentes estructurales en servicio requiere conocer el valor de la tenacidad a la fractura, pero los métodos convencionales para medir la tenacidad demandan remover grandes cantidades de material del componente, lo cual es generalmente impráctico. Sin embargo, el Ensayo Miniatura de Punzonamiento (EMP) (que utiliza especímenes miniatura no estandarizados) ha sido empleado como una alternativa práctica y conveniente para evaluar las características de fractura del material de componentes en servicio. El propósito de esta investigación fue encontrar una relación entre la deformación a la fractura equivalente de EMP εaf y la tenacidad a la fractura JIC de aceros colados de baja aleación procedentes de anclajes de un puente atirantado localizado en el Golfo de México. La tenacidad a la fractura JIC se calculó a partir de los datos experimentales reportados de KIC en un trabajo previo y la deformación a la fractura equivalente se obtuvo mediante el EMP empleando especímenes de 10x10 mm2 por 0.5 mm de espesor. A partir de los resultados de εaf y JIC obtenidos, y correspondientes datos de aceros de baja aleación de la literatura, una correlación lineal fue propuesta para estimar la tenacidad de fractura a partir de la deformación a la fractura equivalente del EMP para los aceros colados pertenecientes a este caso de estudio.

          Related collections

          Most cited references22

          • Record: found
          • Abstract: not found
          • Article: not found

          Estimation of the mechanical properties of metallic materials by means of the small punch test

            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Development of a further-miniaturized specimen of 3 mm diameter for tem disk (ø 3 mm) small punch tests

              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties

                Bookmark

                Author and article information

                Contributors
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Role: ND
                Journal
                ns
                Nova scientia
                Nova scientia
                Universidad de La Salle Bajío A. C., Coordinación de Investigación (León, Guanajuato, Mexico )
                2007-0705
                2018
                : 10
                : 20
                : 244-262
                Affiliations
                [1] Celaya Guanajuato orgnameInstituto Tecnológico de Celaya orgdiv1Depto. de Ingeniería Mecatrónica Mexico alejandro.alcaraz@ 123456itcelaya.edu.mx
                [2] Cantabria Cantabria orgnameUniversidad de Cantabria orgdiv1E. T. S. de Ingenieros de Caminos, Canales y Puertos orgdiv2Depto. Ciencia e Ingeniería del Terreno Spain
                [4] Querétaro orgnameInstituto Mexicano del Transporte Mexico
                [3] Celaya Guanajuato orgnameInstituto Tecnológico de Celaya orgdiv1Depto. de Ingeniería Mecánica Mexico
                Article
                S2007-07052018000100244
                10.21640/ns.v10i20.1316
                a2ce992f-bc1d-4b28-8152-e45588a6d5e9

                This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

                History
                : 19 April 2018
                : 02 January 2018
                Page count
                Figures: 0, Tables: 0, Equations: 0, References: 31, Pages: 19
                Product

                SciELO Mexico

                Categories
                Natural sciences and engineering

                small punch test,fracture toughness,low-alloy cast steel,cable-stayed bridge,anchorage,ensayo miniatura de punzonamiento,resistencia a la fractura,aceros colados de baja aleación,puente atirantado,anclaje

                Comments

                Comment on this article