14
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Novel conducting solid polymer electrolytes with a zwitterionic structure boosting ionic conductivity and retarding lithium dendrite formation

      Read this article at

      ScienceOpenPublisher
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Sufficient hydrogen bonding and ion–dipole interactions with zwitterion structure augment ionic conductivity and impede anionic mobility and lithium dendritic growth in conducting solid polymer electrolytes to enable high cycling performance.

          Abstract

          Suppressing the anionic mobility in solid polymer electrolytes (SPEs) is crucial to mitigate the ionic conductivity and internal cell polarization, thus upgrading the stability and cycle life of rechargeable lithium-ion batteries (LIBs). Now, a series of novel conducting solid polymer electrolytes (CSPEs) with a zwitterionic structure comprising TEOS which was grafted to nitrogen-centered cations connected to hydrophilic sulfonate and carboxylate groups were used as SPEs in LIBs. The quaternized 1,8-diaminonaphthalene polyvinylidene difluoride lithium-ion conducting electrolyte (DN-PF-LCP) as an SPE component in LIBs achieves outstanding ionic conductivity (8.69 × 10 −4 S cm −1), a sufficient capacity of 136 mA h g −1 with a decent capacity retention of 96% at a current rate of 0.3C over 200 cycles at 25 °C, and superior thermo-stability (∼420 °C). The zwitterionic structure of the DN-PF-LCP CSPE provides strong molecular interactions and efficiently facilitates the disintegration of Li + ions, thus stimulating the mobility of Li + ions within the CSPE and enhancing the Li + ion conduction properties. The hydrogen bonding and ion–dipole interactions in the DN-PF-LCP CSPE provide nanosized self-agglomeration of anions and provide interaction between anions and their structurally homologous matrix, thus impeding the mobility of anions and lithium dendritic growth. These outstanding characteristics of DN-PF-LCP make it promising as a CSPE for LIBs.

          Related collections

          Most cited references75

          • Record: found
          • Abstract: found
          • Article: found

          Dendrite-free lithium deposition via self-healing electrostatic shield mechanism.

          Rechargeable lithium metal batteries are considered the "Holy Grail" of energy storage systems. Unfortunately, uncontrollable dendritic lithium growth inherent in these batteries (upon repeated charge/discharge cycling) has prevented their practical application over the past 40 years. We show a novel mechanism that can fundamentally alter dendrite formation. At low concentrations, selected cations (such as cesium or rubidium ions) exhibit an effective reduction potential below the standard reduction potential of lithium ions. During lithium deposition, these additive cations form a positively charged electrostatic shield around the initial growth tip of the protuberances without reduction and deposition of the additives. This forces further deposition of lithium to adjacent regions of the anode and eliminates dendrite formation in lithium metal batteries. This strategy may also prevent dendrite growth in lithium-ion batteries as well as other metal batteries and transform the surface uniformity of coatings deposited in many general electrodeposition processes.
            • Record: found
            • Abstract: found
            • Article: not found

            Poly(ethylene oxide)-based electrolytes for lithium-ion batteries

            This article reviews PEO-based electrolytes for lithium-ion batteries. Poly(ethylene oxide) (PEO) based materials are widely considered as promising candidates of polymer hosts in solid-state electrolytes for high energy density secondary lithium batteries. They have several specific advantages such as high safety, easy fabrication, low cost, high energy density, good electrochemical stability, and excellent compatibility with lithium salts. However, the typical linear PEO does not meet the production requirement because of its insufficient ionic conductivity due to the high crystallinity of the ethylene oxide (EO) chains, which can restrain the ionic transition due to the stiff structure especially at low temperature. Scientists have explored different approaches to reduce the crystallinity and hence to improve the ionic conductivity of PEO-based electrolytes, including blending, modifying and making PEO derivatives. This review is focused on surveying the recent developments and issues concerning PEO-based electrolytes for lithium-ion batteries.
              • Record: found
              • Abstract: found
              • Article: not found

              Polymer electrolytes for lithium polymer batteries

              In this review, state-of-the-art polymer electrolytes are discussed with respect to their electrochemical and physical properties for their application in lithium polymer batteries. In this review, state-of-the-art polymer electrolytes are discussed with respect to their electrochemical and physical properties for their application in lithium polymer batteries. We divide polymer electrolytes into the two large categories of solid polymer electrolytes and gel polymer electrolytes (GPE). The performance requirements and ion transfer mechanisms of polymer electrolytes are presented at first. Then, solid polymer electrolyte systems, including dry solid polymer electrolytes, polymer-in-salt systems (rubbery electrolytes), and single-ion conducting polymer electrolytes, are described systematically. Solid polymer electrolytes still suffer from poor ionic conductivity, which is lower than 10 −5 S cm −1 . In order to further improve the ionic conductivity, numerous new types of lithium salt have been studied and inorganic fillers have been incorporated into solid polymer electrolytes. In the section on gel polymer electrolytes, the types of plasticizer and preparation methods of GPEs are summarized. Although the ionic conductivity of GPEs can reach 10 −3 S cm −1 , their low mechanical strength and poor interfacial properties are obstacles to their practical application. Significant attention is paid to the incorporation of inorganic fillers into GPEs to improve their mechanical strength as well as their transport properties and electrochemical properties.

                Author and article information

                Contributors
                Journal
                JMCAET
                Journal of Materials Chemistry A
                J. Mater. Chem. A
                Royal Society of Chemistry (RSC)
                2050-7488
                2050-7496
                October 19 2021
                2021
                : 9
                : 40
                : 22878-22891
                Affiliations
                [1 ]School of Chemistry and Chemical Engineering, School of Materials Science & Engineering, Hefei University of Technology, Hefei, Anhui, 230009, PR China
                [2 ]Institute of Energy, Hefei Comprehensive National Science Center, Hefei, Anhui, 230031, PR China
                [3 ]School of Electrical Engineering and Automation, Hefei University of Technology, Hefei, Anhui, 230009, PR China
                Article
                10.1039/D1TA05396E
                a65558a0-862a-4810-a0fa-21c0c6652076
                © 2021

                http://rsc.li/journals-terms-of-use

                History

                Comments

                Comment on this article

                Related Documents Log