16
views
0
recommends
+1 Recommend
1 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found

      Automatisierte Objekterkennung zur Interpretation hochauflösender Bilddaten in der Erdfernerkundung

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Als Datengrundlage für die Erhebung von Flächennutzungsparametern, wie sie in geografischen Informationssystemen (GIS) abgelegt und verwaltet werden, dienen oft Bilddaten aus der Erdfernerkundung. Die zur Erkennung und Unterscheidung der Objekte notwendige hohe Pixelauflösung führt bei der Erfassung eines Zielgebiets wie beispielsweise einer Stadt zu enormen Datenmengen. Aus diesen Bilddaten gilt es, möglichst schnell und preiswert die für ein GIS notwendigen Informationen, wie Umrissvektoren und Objektattribute, zu extrahieren. Diese Arbeit ist ein Beitrag zur Automatisierung dieses Schritts mit besonderem Schwerpunkt auf der Gebäudeextraktion. Datengrundlage sind hochauflösende multispektrale Orthobilder und ein digitales Oberflächenmodell (DOM) der digitalen Luftbildkamera HRSC-A bzw. HRSC-AX zum Einsatz. Deswegen werden das Aufnahmeprinzip sowie die Datenverarbeitung der HRSC überblicksartig vorgestellt. Auf Basis dieser HRSC-Standarddatenprodukte wird ein Vorgehen zur Extraktion von Objekten entwickelt. In einer hierarchisch geordneten Abfolge an Segmentierungsschritten werden aus der Pixelinformation bedeutungstragende Einheiten extrahiert. Dieser Segmentierungsansatz lässt sich auf mehrere Objektkategorien, wie Straßen oder Ackerflächen, erweitern. So werden in der aktuellen Entwicklungsstufe neben Gebäuden auch Baumregionen detektiert. Anhand des Oberflächenmodells werden erhöhte Regionen erkannt. Dazu wird das DOM durch Berechnung eines Terrainmodells auf Grundhöhe normiert. Für erhöhte Objekte wird die Grundhöhe aus umliegenden Grundregionen abgeleitet. Die erhöhten Regionen werden anschließend in Bäume und Gebäude unterteilt. Dazu werden aus den Multispektraldaten Vegetationscharakteristika bestimmt und entsprechende Baumsegmente ermittelt. Die Gebäuderegionen resultieren aus einer Nachverarbeitung der verbleibenden Segmente. Um Gebäudekomplexe in einzelne Häuser aufzuteilen, wird ein gradientenbasierter Ansatz entwickelt. Anhand der für Brandmauern typischen Gradienteninformation werden Linienhypothesen zur Unterteilung der Gebäudesegmente generiert. Diese werden schrittweise anhand geometrischer und radiometrischer Kriterien auf ihre Plausibilität überprüft. Schließlich werden die ursprünglich aus dem DOM stammenden Konturen der Gebäudesegmente und deren Übereinstimung mit Bildkanten eines Orthobildes betrachtet. In einem adaptiven Ansatz wird das Konturpolygon durch die Gradienteninformation an angrenzende Bildkanten angepasst. Zur Umsetzung typischer Gebäudegeometrien wie rechter Winkel oder Parallelität werden innerhalb des Adaptionsprozesses entsprechende Nebenbedingungen formuliert. Die Extraktion erhöhter Objekte wie auch deren Unterteilung in Bäume und Gebäude erfolgt mit hoher Genauigkeit, z.B. liegen die Detektionsraten bei Gebäuden über 90%. Der neuartige Ansatz zur Unterteilung in einzelne Häuser ohne explizite Liniendetektion führt bereits in der vorgestellten Entwicklungsstufe zur Beschleunigung einer manuellen Interpretation. Die adaptive Verbesserung der Gebäudekontur führt zu gebäudetypischeren Umrissen ohne Beeinträchtigung der hohen Detektionsraten.

          Abstract

          Remote sensing image data are often used as a basis for determining land use parameters, as they are stored and managed in geographic information systems (GIS). Covering a target area leads to an enormous amount of data due to the high pixel resolution required for recognizing and discriminating objects. To effectively derive GIS information like contour vectors or object attributes from these data, the extraction process has to be fast and cost-effective. This thesis is a contribution to the automization of this step with a focus on building extraction. High resolution multispectral ortho-images and a digital surface model (DSM), generated by the digital aerial camera HRSC-A or HRSC-AX, are used as data basis. Therefore, the HRSC imaging principle and data processing are summarized. Based on these HRSC standard data products, an object extraction scheme is developed. In a hierarchically ordered sequence of segmentation steps, meaningful units are extracted from pixel information. This segmentation approach is extendable to several object categories like streets or fields. Thus, tree regions, as well as buildings are detected in the current stage of implementation. Elevated regions are recognized using the digital surface model. For that purpose the DSM is normalized by calculating a terrain model. For elevated objects the terrain height is derived from surrounding ground regions. Subsequently, the elevated regions are separated into trees and buildings. Determining spectral characteristics of vegetation from the multispectral data leads to corresponding tree segments. The building regions result from post-processing the remaining segments. In order to split the building segments into single houses, a gradient based approach is developed. By means of the gradient information associated with firewalls, line hypotheses for subdividing the building segments are generated. Their plausibility is checked by gradually applying geometric and spectral criteria. Finally, the building contours, originally derived from the DSM, and their correspondence to image edges in an ortho-image, are considered. In an adaptive approach, the contour polygon is adjusted to neighboring image edges using the gradient information. Typical building geometries like right angles or parallelism are enforced by applying corresponding constraints in the adaption process. The extraction of elevated objects, as well as the separation into trees and buildings, is carried out with high accuracy, e.g. the building detection rates are over 90%. In the current development stage the novel approach for separating building segments into single houses without an explicit line detection already leads to a speeding-up of a manual interpretation. The adaptive improvement of building contours leads to building typical contours without affecting the high detection rates.

          Related collections

          Most cited references7

          • Record: found
          • Abstract: found
          • Article: not found

          Image analysis using mathematical morphology.

          For the purposes of object or defect identification required in industrial vision applications, the operations of mathematical morphology are more useful than the convolution operations employed in signal processing because the morphological operators relate directly to shape. The tutorial provided in this paper reviews both binary morphology and gray scale morphology, covering the operations of dilation, erosion, opening, and closing and their relations. Examples are given for each morphological concept and explanations are given for many of their interrelationships.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Local Maximum Filtering for the Extraction of Tree Locations and Basal Area from High Spatial Resolution Imagery

              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Extraction of buildings and trees in urban environments

                Bookmark

                Author and article information

                Journal
                Mathematisch-Naturwissenschaftliche Fakultät II, Humboldt-Universität (kvv )
                25 October 2004
                26 October 2004
                Article
                oai:HUBerlin.de:20704
                a6fbc158-cab1-414b-9f70-966f49ba2090
                History

                Informatik, Datenverarbeitung,Objektextraktion,Hierarchischer Segmentierungsprozess,Physik,Gebäudedetektion,Adaptive Konturüberarbeitung,Hochauflösende Orthobilddaten,object extraction,hierarchical segmentation process,building detection,adaptive contour improvement,high resolution ortho-images

                Comments

                Comment on this article