20
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Lightweight mobile stick-type water-based triboelectric nanogenerator with amplified current for portable safety devices

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          ABSTRACT

          Due to its abundance, mechanical energy is a promising ambient energy source. Triboelectric nanogenerators (TENGs) represent an effective mechanical energy harvesting method based on the use of contact electrification. The existing liquid-based TENGs can operate robustly without surface damage; however, the output of these TENGs is considerably smaller than that of solid-based TENGs. Notably, liquid-based TENGs in which the liquid directly contacts the conductive material can produce an electrical current of more than few mA. However, the liquid reservoir must have an adequate volume, and sufficient space must be provided for the liquid to move for generating the electrical output. To ensure a compact and lightweight design and produce electrical output in the low input frequency range, we introduce a mobile stick-type water-based TENG (MSW-TENG). The proposed MSW-TENG can generate an open-circuit voltage and closed-circuit current of up to 710 V and 2.9 mA, respectively, and be utilized as self-powered safety device. The findings of this study can promote the implementation of TENGs in everyday applications.

          Graphical Abstract

          Related collections

          Most cited references29

          • Record: found
          • Abstract: not found
          • Article: not found

          Flexible triboelectric generator

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Transparent triboelectric nanogenerators and self-powered pressure sensors based on micropatterned plastic films.

            Transparent, flexible and high efficient power sources are important components of organic electronic and optoelectronic devices. In this work, based on the principle of the previously demonstrated triboelectric generator, we demonstrate a new high-output, flexible and transparent nanogenerator by using transparent polymer materials. We have fabricated three types of regular and uniform polymer patterned arrays (line, cube, and pyramid) to improve the efficiency of the nanogenerator. The power generation of the pyramid-featured device far surpassed that exhibited by the unstructured films and gave an output voltage of up to 18 V at a current density of ∼0.13 μA/cm(2). Furthermore, the as-prepared nanogenerator can be applied as a self-powered pressure sensor for sensing a water droplet (8 mg, ∼3.6 Pa in contact pressure) and a falling feather (20 mg, ∼0.4 Pa in contact pressure) with a low-end detection limit of ∼13 mPa.
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              LI.A contribution to the theory of electrocapillarity

                Bookmark

                Author and article information

                Journal
                Sci Technol Adv Mater
                Sci Technol Adv Mater
                Science and Technology of Advanced Materials
                Taylor & Francis
                1468-6996
                1878-5514
                17 February 2022
                2022
                17 February 2022
                : 23
                : 1
                : 161-168
                Affiliations
                [a ]School of Mechanical Engineering, Chung-ang University; , Dongjak-gu, Seoul, Republic of Korea
                [b ]Department of Biomedical Engineering, The University of Alabama at Birmingham; , Birmingham, AL, United States
                [c ]Safety System R&d Group, Korea Institute of Industrial Technology (Kitech); , Yeongcheon-si, Republic of Korea
                [d ]Green and Sustainable Materials R&d Department, Korea Institute of Industrial Technology (Kitech); , Cheonan-si, Republic of Korea
                [e ]Department of Chemical & Biomolecular Engineering, College of Engineering, Yonsei University; , Seodaemun-gu, Seoul, Republic of Korea
                Author notes
                CONTACT Sangmin Lee slee98@ 123456cau.ac.kr School of Mechanical Engineering, Chung-ang University; , 84, Heukseok-ro, Dongjak-gu, Seoul, Republic of Korea
                [#]

                These authors contributed equally to this work.

                Article
                2030195
                10.1080/14686996.2022.2030195
                8856095
                35185391
                b54c2d70-6315-4ead-a520-9fb664ae738e
                © 2022 The Author(s). Published by National Institute for Materials Science in partnership with Taylor & Francis Group.

                This is an Open Access article distributed under the terms of the Creative Commons Attribution License ( http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

                History
                Page count
                Figures: 4, References: 27, Pages: 8
                Categories
                Research Article
                New topics/Others

                energy harvesting,triboelectric nanogenerator,mechanical energy,portable device,70 new topics,others, 206 energy conversion,transport,storage,recovery < 200 applications

                Comments

                Comment on this article