1
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Volumetric analysis of mucous retention cysts in the maxillary sinus: A retrospective study using cone-beam computed tomography

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Purpose

          The aim of this study was to evaluate the volumetric characteristics of mucous retention cysts (MRCs) in the maxillary sinus and to analyze potential associations of MRCs with dentoalveolar pathologies.

          Materials and Methods

          Cone-beam computed tomography (CBCT) scans exhibiting bilateral maxillary sinuses that were acquired from January 2016 to February 2019 were initially screened. A total of 227 scans (454 sinuses) that fulfilled the inclusion criteria were included. The presence, location, and volumetric characteristics of the diagnosed MRCs were evaluated on CBCT images using the 3D-Slicer software platform. The presence of MRCs was correlated with potential influencing factors including age, sex, and dentoalveolar pathology. For MRCs located on the sinus floor, factors with a potential impact on the volume, surface, and diameter were analyzed.

          Results

          An MRC was present in 130 (28.6%) of the 454 sinuses. Most MRCs were located on the sinus walls and floor. The mean MRC volume, surface, and diameter were 551.21±1368.04 mm 3, 228.09±437.56 mm 2, and 9.63±5.40 mm, respectively. Significantly more sinuses with associated endodontically treated teeth/periapical lesions were diagnosed with an MRC located on the sinus floor. For MRCs located on the sinus floor, endodontic status exhibited a significant association with increased volume, surface, and diameter.

          Conclusion

          Periapical lesions might be a contributing factor associated with the presence and volume of MRCs located on the sinus floor. The 3D-Slicer software platform was found to be a useful tool for clinicians to analyze the size of MRCs before surgical interventions such as sinus floor elevation procedures.

          Related collections

          Most cited references35

          • Record: found
          • Abstract: found
          • Article: not found

          The measurement of observer agreement for categorical data.

          This paper presents a general statistical methodology for the analysis of multivariate categorical data arising from observer reliability studies. The procedure essentially involves the construction of functions of the observed proportions which are directed at the extent to which the observers agree among themselves and the construction of test statistics for hypotheses involving these functions. Tests for interobserver bias are presented in terms of first-order marginal homogeneity and measures of interobserver agreement are developed as generalized kappa-type statistics. These procedures are illustrated with a clinical diagnosis example from the epidemiological literature.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            3D Slicer as an image computing platform for the Quantitative Imaging Network.

            Quantitative analysis has tremendous but mostly unrealized potential in healthcare to support objective and accurate interpretation of the clinical imaging. In 2008, the National Cancer Institute began building the Quantitative Imaging Network (QIN) initiative with the goal of advancing quantitative imaging in the context of personalized therapy and evaluation of treatment response. Computerized analysis is an important component contributing to reproducibility and efficiency of the quantitative imaging techniques. The success of quantitative imaging is contingent on robust analysis methods and software tools to bring these methods from bench to bedside. 3D Slicer is a free open-source software application for medical image computing. As a clinical research tool, 3D Slicer is similar to a radiology workstation that supports versatile visualizations but also provides advanced functionality such as automated segmentation and registration for a variety of application domains. Unlike a typical radiology workstation, 3D Slicer is free and is not tied to specific hardware. As a programming platform, 3D Slicer facilitates translation and evaluation of the new quantitative methods by allowing the biomedical researcher to focus on the implementation of the algorithm and providing abstractions for the common tasks of data communication, visualization and user interface development. Compared to other tools that provide aspects of this functionality, 3D Slicer is fully open source and can be readily extended and redistributed. In addition, 3D Slicer is designed to facilitate the development of new functionality in the form of 3D Slicer extensions. In this paper, we present an overview of 3D Slicer as a platform for prototyping, development and evaluation of image analysis tools for clinical research applications. To illustrate the utility of the platform in the scope of QIN, we discuss several use cases of 3D Slicer by the existing QIN teams, and we elaborate on the future directions that can further facilitate development and validation of imaging biomarkers using 3D Slicer. Copyright © 2012 Elsevier Inc. All rights reserved.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Quality guidelines for endodontic treatment: consensus report of the European Society of Endodontology.

              (2006)
              The assurance of the quality of a service rendered by a member of the dental profession is an essential feature of any system of peer review in dentistry. This document addresses two essential elements: (i) appropriateness of treatment modality and (ii) quality or level of treatment rendered. In revising these guidelines the European Society of Endodontology is responding to a public and professional need. In receiving care of a specialized nature such as endodontic treatment, patients need and deserve treatment that meets the standard of care generally given by competent practitioners. The European Society of Endodontology has the expertise and professional responsibility necessary to assist the dental profession by instituting guidelines on the standard of care in the special area of Endodontics. In accepting this responsibility the European Society of Endodontology formulated treatment guidelines that are intended to represent current good practice.
                Bookmark

                Author and article information

                Journal
                Imaging Sci Dent
                Imaging Sci Dent
                ISD
                Imaging Science in Dentistry
                Korean Academy of Oral and Maxillofacial Radiology
                2233-7822
                2233-7830
                June 2021
                29 January 2021
                : 51
                : 2
                : 117-127
                Affiliations
                [1 ]Oral and Maxillofacial Radiology, Applied Oral Sciences and Community Dental Care, Faculty of Dentistry, The University of Hong Kong, Hong Kong SAR, China.
                [2 ]Second Dental Clinic, Department of Oral Implantology, Ninth People's Hospital, School of Medicine, Shanghai Key Laboratory of Stomatology, National Clinical Research Center of Stomatology, Shanghai Jiao Tong University, Shanghai, China.
                [3 ]School of Information Engineering, Guangdong University of Technology, Guangzhou, China.
                [4 ]Oral and Maxillofacial Surgery, Faculty of Dentistry, The University of Hong Kong, Hong Kong SAR, China.
                [5 ]Department of Oral Health & Medicine, University Center for Dental Medicine Basel UZB, University of Basel, Basel, Switzerland.
                Author notes
                Correspondence to: Prof. Michael M. Bornstein. Department of Oral Health & Medicine, University Center for Dental Medicine Basel UZB, Mattenstrasse 40, 4058 Basel, Switzerland. Tel) 41-61-267-25-45, michael.bornstein@ 123456unibas.ch
                Author information
                https://orcid.org/0000-0002-3971-3484
                https://orcid.org/0000-0001-9627-1857
                https://orcid.org/0000-0003-3672-357X
                https://orcid.org/0000-0002-8352-6256
                https://orcid.org/0000-0001-7699-1937
                https://orcid.org/0000-0002-7773-8957
                Article
                10.5624/isd.20200267
                8219453
                34235057
                bb1f1ded-145b-4cef-af2f-882645f7c5d4
                Copyright © 2021 by Korean Academy of Oral and Maxillofacial Radiology

                This is an Open Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License ( http://creativecommons.org/licenses/by-nc/3.0/) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

                History
                : 25 September 2020
                : 29 November 2020
                : 04 December 2020
                Categories
                Original Article

                Dentistry
                maxillary sinus,sinus floor augmentation,cyst,cone-beam computed tomography
                Dentistry
                maxillary sinus, sinus floor augmentation, cyst, cone-beam computed tomography

                Comments

                Comment on this article