+1 Recommend
0 collections
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Structure of the Wnt–Frizzled–LRP6 initiation complex reveals the basis for coreceptor discrimination


      Read this article at

          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.


          The structure of the signaling-competent Wnt–Frizzled–LRP6 complex reveals the basis for initiating canonical Wnt/β-catenin signaling. An unusual “tandem anchoring” mode for Wnt binding to LRP6 via two flexible loops of Wnt clarifies the natural topology of the canonical Wnt signaling complex that could serve as a structural blueprint for designing “surrogate” Wnts to mimic the endogenous Wnt-induced dimerization mode. Grafting these loops onto different Wnts changes their binding selectivity for LRP6 extracellular domains. The modular nature of Wnt discrimination of LRP6 from the “non-canonical” coreceptors opens the possibility of swapping the linker domain to create “designer Wnts” with altered functions in regenerative medicine and cancer biology.


          Wnt morphogens are critical for embryonic development and tissue regeneration. Canonical Wnts form ternary receptor complexes composed of tissue-specific Frizzled (Fzd) receptors together with the shared LRP5/6 coreceptors to initiate β-catenin signaling. The cryo-EM structure of a ternary initiation complex of an affinity-matured XWnt8–Frizzled8–LRP6 complex elucidates the basis of coreceptor discrimination by canonical Wnts by means of their N termini and linker domains that engage the LRP6 E1E2 domain funnels. Chimeric Wnts bearing modular linker “grafts” were able to transfer LRP6 domain specificity between different Wnts and enable non-canonical Wnt5a to signal through the canonical pathway. Synthetic peptides comprising the linker domain serve as Wnt-specific antagonists. The structure of the ternary complex provides a topological blueprint for the orientation and proximity of Frizzled and LRP6 within the Wnt cell surface signalosome.

          Related collections

          Most cited references70

          • Record: found
          • Abstract: found
          • Article: found
          Is Open Access

          Highly accurate protein structure prediction with AlphaFold

          Proteins are essential to life, and understanding their structure can facilitate a mechanistic understanding of their function. Through an enormous experimental effort 1 – 4 , the structures of around 100,000 unique proteins have been determined 5 , but this represents a small fraction of the billions of known protein sequences 6 , 7 . Structural coverage is bottlenecked by the months to years of painstaking effort required to determine a single protein structure. Accurate computational approaches are needed to address this gap and to enable large-scale structural bioinformatics. Predicting the three-dimensional structure that a protein will adopt based solely on its amino acid sequence—the structure prediction component of the ‘protein folding problem’ 8 —has been an important open research problem for more than 50 years 9 . Despite recent progress 10 – 14 , existing methods fall far short of atomic accuracy, especially when no homologous structure is available. Here we provide the first computational method that can regularly predict protein structures with atomic accuracy even in cases in which no similar structure is known. We validated an entirely redesigned version of our neural network-based model, AlphaFold, in the challenging 14th Critical Assessment of protein Structure Prediction (CASP14) 15 , demonstrating accuracy competitive with experimental structures in a majority of cases and greatly outperforming other methods. Underpinning the latest version of AlphaFold is a novel machine learning approach that incorporates physical and biological knowledge about protein structure, leveraging multi-sequence alignments, into the design of the deep learning algorithm. AlphaFold predicts protein structures with an accuracy competitive with experimental structures in the majority of cases using a novel deep learning architecture.
            • Record: found
            • Abstract: found
            • Article: not found

            Phaser crystallographic software

            1. Introduction Improved crystallographic methods rely on both improved automation and improved algorithms. The software handling one part of structure solution must be automatically linked to software handling parts upstream and downstream of it in the structure solution pathway with (ideally) no user input, and the algorithms implemented in the software must be of high quality, so that the branching or termination of the structure solution pathway is minimized or eliminated. Automation allows all the choices in structure solution to be explored where the patience and job-tracking abilities of users would be exhausted, while good algorithms give solutions for poorer models, poorer data or unfavourable crystal symmetry. Both forms of improvement are essential for the success of high-throughput structural genomics (Burley et al., 1999 ▶). Macromolecular phasing by either of the two main methods, molecular replacement (MR) and experimental phasing, which includes the technique of single-wavelength anomalous dispersion (SAD), are key parts of the structure solution pathway that have potential for improvement in both automation and the underlying algorithms. MR and SAD are good phasing methods for the development of structure solution pipelines because they only involve the collection of a single data set from a single crystal and have the advantage of minimizing the effects of radiation damage. Phaser aims to facilitate automation of these methods through ease of scripting, and to facilitate the development of improved algorithms for these methods through the use of maximum likelihood and multivariate statistics. Other software shares some of these features. For molecular replacement, AMoRe (Navaza, 1994 ▶) and MOLREP (Vagin & Teplyakov, 1997 ▶) both implement automation strategies, though they lack likelihood-based scoring functions. Likelihood-based experimental phasing can be carried out using Sharp (La Fortelle & Bricogne, 1997 ▶). 2. Algorithms The novel algorithms in Phaser are based on maximum likelihood probability theory and multivariate statistics rather than the traditional least-squares and Patterson methods. Phaser has novel maximum likelihood phasing algorithms for the rotation functions and translation functions in MR and the SAD function in experimental phasing, but also implements other non-likelihood algorithms that are critical to success in certain cases. Summaries of the algorithms implemented in Phaser are given below. For completeness and for consistency of notation, some equations given elsewhere are repeated here. 2.1. Maximum likelihood Maximum likelihood is a branch of statistical inference that asserts that the best model on the evidence of the data is the one that explains what has in fact been observed with the highest probability (Fisher, 1922 ▶). The model is a set of parameters, including the variances describing the error estimates for the parameters. The introduction of maximum likelihood estimators into the methods of refinement, experimental phasing and, with Phaser, MR has substantially increased success rates for structure solution over the methods that they replaced. A set of thought experiments with dice (McCoy, 2004 ▶) demonstrates that likelihood agrees with our intuition and illustrates the key concepts required for understanding likelihood as it is applied to crystallography. The likelihood of the model given the data is defined as the probability of the data given the model. Where the data have independent probability distributions, the joint probability of the data given the model is the product of the individual distributions. In crystallography, the data are the individual reflection intensities. These are not strictly independent, and indeed the statistical relationships resulting from positivity and atomicity underlie direct methods for small-molecule structures (reviewed by Giacovazzo, 1998 ▶). For macromolecular structures, these direct-methods relationships are weaker than effects exploited by density modification methods (reviewed by Kleywegt & Read, 1997 ▶); the presence of solvent means that the molecular transform is over-sampled, and if there is noncrystallographic symmetry then other correlations are also present. However, the assumption of independence is necessary to make the problem tractable and works well in practice. To avoid the numerical problems of working with the product of potentially hundreds of thousands of small probabilities (one for each reflection), the log of the likelihood is used. This has a maximum at the same set of parameters as the original function. Maximum likelihood also has the property that if the data are mathematically transformed to another function of the parameters, then the likelihood optimum will occur at the same set of parameters as the untransformed data. Hence, it is possible to work with either the structure-factor intensities or the structure-factor amplitudes. In the maximum likelihood functions in Phaser, the structure-factor amplitudes (Fs), or normalized structure-factor amplitudes (Es, which are Fs normalized so that the mean-square values are 1) are used. The crystallographic phase problem means that the phase of the structure factor is not measured in the experiment. However, it is easiest to derive the probability distributions in terms of the phased structure factors and then to eliminate the unknown phase by integration, a process known as integrating out a nuisance variable (the nuisance variable being the introduced phase of the observed structure factor, or equivalently the phase difference between the observed structure factor and its expected value). The central limit theorem applies to structure factors, which are sums of many small atomic contributions, so the probability distribution for an acentric reflection, F O, given the expected value of F O (〈F O〉) is a two-dimensional Gaussian with variance Σ centred on 〈F O〉. (Note that here and in the following, bold font is used to represent complex or signed structure factors, and italics to represent their amplitudes.) In applications to molecular replacement and structure refinement, 〈F O〉 is the structure factor calculated from the model (F C) multiplied by a fraction D (where 0 R, H = 0. The atoms are taken to be of equal mass. The eigenvalues λ and eigenvectors U of H can then be calculated. The eigenvalues are directly proportional to the squares of the vibrational frequencies of the normal modes, the lowest eigenvalues thus giving the lowest normal modes. Six of the eigenvalues will be zero, corresponding to the six degrees of freedom for a rotation and translation of the entire structure. For all but the smallest proteins, eigenvalue decomposition of the all-atom Hessian is not computationally feasible with current computer technology. Various methods have been developed to reduce the size of the eigenvalue problem. Bahar et al. (1997 ▶) and Hinsen (1998 ▶) have shown that it is possible to find the lowest frequency normal modes of proteins in the elastic network model by considering amino acid Cα atoms only. However, this merely postpones the computational problem until the proteins are an order of magnitude larger. The problem is solved for any size protein with the rotation–translation block (RTB) approach (Durand et al., 1994 ▶; Tama et al., 2000 ▶), where the protein is divided into blocks of atoms and the rotation and translation modes for each block used project the full Hessian into a lower dimension. The projection matrix is a block-diagonal matrix of dimensions 3N × 3N. Each of the NB block matrices P nb has dimensions 3N nb × 6, where N nb is the number of atoms in the block nb, For atom j in block nb displaced from the centre of mass, of the block, the 3 × 6 matrix P nb,j is The first three columns of the matrix contain the infinitesimal translation eigenvectors of the block and last three columns contain the infinitesimal rotation eigenvectors of the block. The orthogonal basis Q of P nb is then found by QR decomposition: where Q nb is a 3N nb × 6 orthogonal matrix and R nb is a 6 × 6 upper triangle matrix. H can then be projected into the subspace spanned by the translation/rotation basis vectors of the blocks: where The eigenvalues λP and eigenvectors U P of the projected Hessian are then found. The RTB method is able to restrict the size of the eigenvalue problem for any size of protein with the inclusion of an appropriately large N nb for each block. In the implementation of the RTB method in Phaser, N nb for each block is set for each protein such that the total size of the eigenvalue problem is restricted to a matrix H P of maximum dimensions 750 × 750. This enables the eigenvalue problem to be solved in a matter of minutes with current computing technology. The eigenvectors of the translation/rotation subspace can then be expanded back to the atomic space (dimensions of U are N × N): As for the decomposition of the full Hessian H, the eigenvalues are directly proportional to the squares of the vibrational frequencies of the normal modes, the lowest eigenvalues thus giving the lowest normal modes. Although the eigenvalues and eigenvectors generated from decomposition of the full Hessian and using the RTB approach will diverge with increasing frequency, the RTB approach is able to model with good accuracy the lowest frequency normal modes, which are the modes of interest for looking at conformational difference in proteins. The all-atom, Cα only and RTB normal-mode analysis methods are implemented in Phaser. After normal-mode analysis, n normal modes can be used to generate 2 n − 1 (nonzero) combinations of normal modes. Phaser allows the user to specify the r.m.s. deviation between model and target desired by the perturbation, and the fraction dq of the displacement vector for each mode combination corresponding to each model combination is then used to generate the models. Large r.m.s. deviations will cause the geometry of the model to become distorted. Phaser reports when the model becomes so distorted that there are Cα clashes in the structure. 2.4. Packing function The packing of potential solutions in the asymmetric unit is not inherently part of the translation function. It is therefore possible that an arrangement of models has a high log-likelihood gain, although the models may overlap and therefore be physically unreasonable. The packing of the solutions is checked using a clash test using a subset of the atoms in the structure: the ‘trace’ atoms. For proteins, the trace atoms are the Cα positions, spaced at 3.8 Å. For nucleic acid, the phosphate and C atoms in the ribose-phosphate backbone and the N atoms of the bases are selected as trace atoms. These atoms are also spaced at about 3.8 Å, so that the density of trace atoms in nucleic acid is similar to that of proteins, which makes the number of protein–protein, protein–nucleic acid and nucleic acid–nucleic acid clashes comparable where there is a mixed protein–nucleic acid structure. For the clash test, the number of trace atoms from another model within a given distance (default 3 Å) is counted. The clash test includes symmetry-related copies of the model under consideration, other components in the asymmetric unit and their symmetry-related copies. If the search model has a low sequence identity with the target, or has large flexible loops that could adopt an alternative conformation, the number of clashes may be expected to be nonzero. By default the best packing solutions are carried forward, although a specific number of allowed clashes may also be given as the cut-off for acceptance. However, it is better to edit models before use so that structurally nonconserved surface loops are excluded, as they will only contribute noise to the rotation and translation functions. Where an ensemble of structures is used as the model, the highest homology model is taken as the template for the packing search. Before this model is used, the trace atom positions are edited to take account of large conformational differences between the models in the ensemble. Equivalent trace atom positions are compared and if the coordinates deviate by more than 3 Å then the template trace atom is deleted. Thus, use of an ensemble not only improves signal to noise in the maximum likelihood search functions, it also improves the discrimination of possible solutions by the packing function. 2.5. Minimizer Minimization is used in Phaser to optimize the parameters against the appropriate log-likelihood function in the anisotropy correction, in MR (refines the position and orientation of a rigid-body model) and in SAD phasing. The same minimizer code is used for all three applications and has been designed to be easily extensible to other applications. The minimizer for the anisotropy correction uses Newton’s method, while MR and SAD use the standard Broyden–Fletcher–Goldfarb–Shanno (BFGS) algorithm. Both minimization methods in Phaser include a line search. The line search algorithm is a basic iterative method for finding the local minimum of a target function f. Starting at parameters x , the algorithm finds the minimum (within a convergence tolerance) of by varying γ, where γ is the step distance along a descent direction d . Newton’s method and the BFGS algorithm differ in the determination of the descent direction d that is passed to the line search, and thus the speed of convergence. Within one cycle of the line search (where there is no change in d ) the trial step distances γ are chosen using the golden section method. The golden ratio (51/2/2 + 1/2) divides a line so that the ratio of the larger part to the total is the same as the ratio of the smaller to larger. The method makes no assumptions about the function’s behaviour; in particular, it does not assume that the function is quadratic within the bracketed section. If this assumption were made, the line search could proceed via parabolic interpolation. Newton’s method uses the Hessian matrix H of second derivatives and the gradient g at the initial set of parameters x 0 to find the values of the parameters at the minimum x min. If the function is quadratic in x then Newton’s method will find the minimum in one step, but if not, iteration is required. The method requires the inversion of the Hessian matrix, which, for large matrices, consumes a large amount of computational time and memory resources. The eigenvalues of the Hessian need to be positive for the function to be at a minimum, rather than a maximum or saddle point, since the method converges to any point where the gradient vector is zero. When used with the anisotropy correction, the full Hessian matrix is calculated analytically. The BFGS algorithm is one of the most powerful minimization methods when calculation of the full Hessian using analytic or finite difference methods is very computationally intensive. At every step, the gradient search vector is analysed to build up an approximate Hessian matrix H, in order to make the resulting search vector direction d better than the original gradient vector direction. In the ‘pure’ form of the BFGS algorithm, the method is started with matrix H equal to the identity matrix. The off-diagonal elements of the Hessian, the mixed second derivatives (i.e. ∂2LL/∂p i ∂p j ) are thus initially zero. As the BFGS cycle proceeds, the off-diagonal elements become nonzero using information derived from the gradient. However, in Phaser, the matrix H is not the identity but rather is seeded with diagonal elements equal to the second derivatives of the parameters (p i ) with respect to the log-likelihood target function (LL) (i.e. ∂2LL/∂p i 2, or curvatures), the values found in the ‘true’ Hessian. For the SAD refinement the diagonal elements are calculated analytically, but for the MR refinement the diagonal elements are calculated by finite difference methods. Seeding the Hessian with the diagonal elements dramatically accelerates convergence when the parameters are on different scales; when an identity matrix is used, the parameters on a larger scale can fail to shift significantly because their gradients tend to be smaller, even though the necessary shifts tend to be larger. In the inverse Hessian, small curvatures for parameters on a large scale translate into large scale factors applied to the corresponding gradient terms. If any of these curvature terms are negative (as may happen when the parameters are far from their optimal values), the matrix is not positive definite. Such a situation is corrected by using problem-specific information on the expected relative scale of the parameters from the ‘large-shift’ variable, as discussed below in §2.5.1. In addition to the basic minimization algorithms, the minimizer incorporates the ability to bound, constrain, restrain and reparameterize variables, as discussed in detail below. Bounds must be applied to prevent parameters becoming nonphysical, constraints effectively reduce the number of parameters, restraints are applied to include prior probability information, and reparameterization of variables makes the parameter space more quadratic and improves the performance of the minimizer. 2.5.1. Problem-specific parameter scaling information When a function is defined for minimization in Phaser, information must be provided on the relative scales of the parameters of that function, through a ‘large-shifts’ variable. As its name implies, the variable defines the size of a parameter shift that would be considered ‘large’ for each parameter. The ratios of these large-shift values thus specify prior knowledge about the relative scales of the different parameters for each problem. Suitable large-shift values are found by a combination of physical insight (e.g. the size of a coordinate shift considered to be large will be proportional to d min for the data set) and numerical simulations, studying the behaviour of the likelihood function as parameters are varied systematically in a variety of test cases. The large-shifts information is used in two ways. Firstly, it is used to prevent the line search from taking an excessively large step, which can happen if the estimated curvature for a parameter happens to be too small and can lead to the refinement becoming numerically unstable. If the initial step for a line search would change any parameter by more than its large-shift value, the initial step is scaled down. Secondly, it is used to provide relative scale information to correct negative curvature values. Parameters with positive curvatures are used to define the average relationship between the large-shift values and the curvatures, which can then be used to compute appropriate curvature values for the parameters with negative curvatures. This stabilizes the refinement until it is sufficiently close to the minimum that all curvatures become positive. 2.5.2. Reparameterization Second-order minimization algorithms in effect assume that, at least in the region around the minimum, the function can be approximated as a quadratic. Where this assumption holds, the minimizer will converge faster. It is therefore advantageous to use functions of the parameters being minimized so that the target function is more quadratic in the new parameter space than in the original parameter space (Edwards, 1992 ▶). For example, atomic B factors tend to converge slowly to their refined values because the B factor appears in the exponential term in the structure-factor equation. Although any function of the parameters can be used for this purpose, we have found that taking the logarithm of a parameter is often the most effective reparameterization operation (not only for the B factors). The offset x offset is chosen so that the value of x′ does not become undefined for allowed values of x, and to optimize the quadratic nature of the function in x′. For instance, atomic B factors are reparameterized using an offset of 5 Å2, which allows the B factors to approach zero and also has the physical interpretation of accounting roughly for the width of the distribution of electrons for a stationary atom. 2.5.3. Bounds Bounds on the minimization are applied by setting upper and/or lower limits for each variable where required (e.g. occupancy minimum set to zero). If a parameter reaches a limit during a line search, that line search is terminated. In subsequent line searches, the gradient of that parameter is set to zero whenever the search direction would otherwise move the parameter outside of its bounds. Multiplying the gradient by the step size thus does not alter the value of the parameter at its limit. The parameter will remain at its limit unless calculation of the gradient in subsequent cycles of minimization indicates that the parameter should move away from the boundary and into the allowed range of values. 2.5.4. Constraints Space-group-dependent constraints apply to the anisotropic tensor applied to ΣN in the anisotropic diffraction correction. Atoms on special positions also have constraints on the values of their anisotropic tensor. The anisotropic displacement ellipsoid must remain invariant under the application of each symmetry operator of the space group or site-symmetry group, respectively (Giacovazzo, 1992 ▶; Grosse-Kunstleve & Adams, 2002 ▶). These constraints reduce the number of parameters by either fixing some values of the anisotropic B factors to zero or setting some sets of B factors to be equal. The derivatives in the gradient and Hessian must also be constrained to reflect the constraints in the parameters. 2.5.5. Restraints Bayes’ theorem describes how the probability of the model given the data is related to the likelihood and gives a justification for the use of restraints on the parameters of the model. If the probability of the data is taken as a constant, then P(model) is called the prior probability. When the logarithm of the above equation is taken, Prior probability is therefore introduced into the log-likelihood target function by the addition of terms. If parameters of the model are assumed to have independent Gaussian probability distributions, then the Bayesian view of likelihood will lead to the addition of least-squares terms and hence least-squares restraints on those parameters, such as the least-squares restraints applied to bond lengths and bond angles in typical macromolecular structure refinement programs. In Phaser, least-squares terms are added to restrain the B factors of atoms to the Wilson B factor in SAD refinement, and to restrain the anisotropic B factors to being more isotropic (the ‘sphericity’ restraint). A similar sphericity restraint is used in SHELXL (Sheldrick, 1995 ▶) and in REFMAC5 (Murshudov et al., 1999 ▶). 3. Automation Phaser is designed as a large set of library routines grouped together and made available to users as a series of applications, called modes. The routine-groupings in the modes have been selected mainly on historical grounds; they represent traditional steps in the structure solution pipeline. There are 13 such modes in total: ‘anisotropy correction’, ‘cell content analysis’, ‘normal-mode analysis’, ‘ensembling’, ‘fast rotation function’, ‘brute rotation function’, ‘fast translation function’, ‘brute translation function’, ‘log-likelihood gain’, ‘rigid-body refinement’, ‘single-wavelength anomalous dispersion’, ‘automated molecular replacement’ and ‘automated experimental phasing’. The ‘automated molecular replacement’ and ‘automated experimental phasing’ modes are particularly powerful and aim to automate fully structure solution by MR and SAD, respectively. Aspects of the decision making within the modes are under user input control. For example, the ‘fast rotation function’ mode performs the ensembling calculation, then a fast rotation function calculation and then rescores the top solutions from the fast search with a brute rotation function. There are three possible fast rotation function algorithms and two possible brute rotation functions to choose from. There are four possible criteria for selecting the peaks in the fast rotation function for rescoring with the brute rotation function, and for selecting the results from the rescoring for output. Alternatively, the rescoring of the fast rotation function with the brute rotation function can be turned off to produce results from the fast rotation function only. Other modes generally have fewer routines but are designed along the same principles (details are given in the documentation). 3.1. Automated molecular replacement Most structures that can be solved by MR with Phaser can be solved using the ‘automated molecular replacement’ mode. The flow diagram for this mode is shown in Fig. 1 ▶. The search strategy automates four search processes: those for multiple components in the asymmetric unit, for ambiguity in the hand of the space group and/or other space groups in the same point group, for permutations in the search order for components (when there are multiple components), and for finding the best model when there is more than one possible model for a component. 3.1.1. Multiple components of asymmetric unit Where there are many models to be placed in the asymmetric unit, the signal from the placement of the first model may be buried in noise and the correct placement of this first model only found in the context of all models being placed in the asymmetric unit. One way of tackling this problem has been to use stochastic methods to search the multi-dimensional space (Chang & Lewis, 1997 ▶; Kissinger et al., 1999 ▶; Glykos & Kokkinidis, 2000 ▶). However, we have chosen to use a tree-search-with-pruning approach, where a list of possible placements of the first (and subsequent) models is kept until the placement of the final model. This tree-search-with-pruning search strategy can generate very branched searches that would be challenging for users to negotiate by running separate jobs, but becomes trivial with suitable automation. The search strategy exploits the strength of the maximum likelihood target functions in using prior information in the search for subsequent components in the asymmetric unit. The tree-search-with-pruning strategy is heavily dependent on the criteria used for selecting the peaks that survive to the next round. Four selection criteria are available in Phaser: selection by percentage difference between the top and mean log-likelihood of the search, selection by Z score, selection by number of peaks, and selection of all peaks. The default is selection by percentage, with the default percentage set at 75%. This selection method has the advantage that, if there is one clear peak standing well above the noise, it alone will be passed to the next round, while if there is no clear signal, all peaks high in the list will be passed as potential solutions to the next round. If structure solution fails, it may be possible to rescue the solution by reducing the percentage cut-off used for selection from 75% to, for example, 65%, so that if the correct peak was just missing the default cut-off, it is now included in the list passed to the next round. The tree-search-with-pruning search strategy is sub-optimal where there are multiple copies of the same search model in the asymmetric unit. In this case the search generates many branches, each of which has a subset of the complete solution, and so there is a combinatorial explosion in the search. The tree search would only converge onto one branch (solution) with the placement of the last component on each of the branches, but in practice the run time often becomes excessive and the job is terminated before this point can be reached. When searching for multiple copies of the same component in the asymmetric unit, several copies should be added at each search step (rather than branching at each search step), but this search strategy must currently be performed semi-manually as described elsewhere (McCoy, 2007 ▶). 3.1.2. Alternative space groups The space group of a structure can often be ambiguous after data collection. Ambiguities of space group within the one point group may arise from theoretical considerations (if the space group has an enantiomorph) or on experimental grounds (the data along one or more axes were not collected and the systematic absences along these axes cannot be determined). Changing the space group of a structure to another in the same point group can be performed without re-indexing, merging or scaling the data. Determination of the space group within a point group is therefore an integral part of structure solution by MR. The translation function will yield the highest log-likelihood gain for a correctly packed solution in the correct space group. Phaser allows the user to make a selection of space groups within the same point group for the first translation function calculation in a search for multiple components in the asymmetric unit. If the signal from the placement of the first component is not significantly above noise, the correct space group may not be chosen by this protocol, and the search for all components in the asymmetric unit should be completed separately in all alternative space groups. 3.1.3. Alternative models As the database of known structures expands, the number of potential MR models is also rapidly increasing. Each available model can be used as a separate search model, or combined with other aligned structures in an ‘ensemble’ model. There are also various ways of editing structures before use as MR models (Schwarzenbacher et al., 2004 ▶). The number of MR trials that can be performed thus increases combinatorially with the number of potential models, which makes job tracking difficult for the user. In addition, most users stop performing MR trials as soon as any solution is found, rather than continuing the search until the MR solution with the greatest log-likelihood gain is found, and so they fail to optimize the starting point for subsequent steps in the structure solution pipeline. The use of alternative models to represent a structure component is also useful where there are multiple copies of one type of component in the asymmetric unit and the different copies have different conformations due to packing differences. The best solution will then have the different copies modelled by different search models; if the conformation change is severe enough, it may not be possible to solve the structure without modelling the differences. A set of alternative search models may be generated using previously observed conformational differences among similar structures, or, for example, by normal-mode analysis (see §2.3). Phaser automates searches over multiple models for a component, where each potential model is tested in turn before the one with the greatest log-likelihood gain is found. The loop over alternative models for a component is only implemented in the rotation functions, as the solutions passed from the rotation function to the translation function step explicitly specify which model to use as well as the orientation for the translation function in question. 3.1.4. Search order permutation When searching for multiple components in the asymmetric unit, the order of the search can be a factor in success. The models with the biggest component of the total structure factor will be the easiest to find: when weaker scattering components are the subject of the initial search, the solution may be buried in noise and not significant enough to survive the selection criteria in the tree-search-with-pruning search strategy. Once the strongest scattering components are located, then the search for weaker scattering components (in the background of the strong scattering components) is more likely to be a success. Having a high component of the total structure factor correlates with the model representing a high fraction of the total contents of the asymmetric unit, low r.m.s. deviation between model and target atoms, and low B factors for the target to which the model corresponds. Although the first of these (high completeness) can be determined in advance from the fraction of the total molecular weight represented by the model, the second can only be estimated from the Chothia & Lesk (1986 ▶) formula and the third is unknown in advance. If structure solution fails with the search performed in the order of the molecular weights, then other permutations of search order should be tried. In Phaser, this possibility is automated on request: the entire search strategy (except for the initial anisotropic data correction) is performed for all unique permutations of search orders. 3.2. Automated experimental phasing SAD is the simplest type of experimental phasing method to automate, as it involves only one crystal and one data set. SAD is now becoming the experimental phasing method of choice, overtaking multiple-wavelength anomalous dis­persion because only a single data set needs to be collected. This can help minimize radiation damage to the crystal, which has a major adverse effect on the success of multi-wavelength experiments. The ‘automated experimental phasing’ mode in Phaser takes an atomic substructure determined by Patterson, direct or dual-space methods (Karle & Hauptman, 1956 ▶; Rossmann, 1961 ▶; Mukherjee et al., 1989 ▶; Miller et al., 1994 ▶; Sheldrick & Gould, 1995 ▶; Sheldrick et al., 2001 ▶; Grosse-Kunstleve & Adams, 2003 ▶) and refines the positions, occupancies, B factors and values of the atoms to optimize the SAD function, then uses log-likelihood gradient maps to complete the atomic substructure. The flow diagram for this mode is shown in Fig. 2 ▶. The search strategy automates two search processes: those for ambiguity in the hand of the space group and for completing atomic substructure from log-likelihood gradient maps. A feature of using the SAD function for phasing is that the substructure need not only consist of anomalous scatterers; indeed it can consist of only real scatterers, since the real scattering of the partial structure is used as part of the phasing function. This allows structures to be completed from initial real scattering models. 3.2.1. Enantiomorphic space groups Since the SAD phasing mode of Phaser takes as input an atomic substructure model, the space group of the solution has already been determined to within the enantiomorph of the correct space group. Changing the enantiomorph of a SAD refinement involves changing the enantiomorph of the heavy atoms, or in some cases the space group (e.g. the enantiomorphic space group of P41 is P43). In some rare cases (Fdd2, I41, I4122, I41 md, I41 cd, I 2d, F4132; Koch & Fischer, 1989 ▶) the origin of the heavy-atom sites is changed [e.g. the enantiomorphic space group of I41 is I41 with the origin shifted to ( , 0, 0)]. If there is only one type of anomalous scatterer, the refinement need not be repeated in both hands: only the phasing needs to be carried out in the second hand to be considered. However, if there is more than one type of anomalous scatterer, then the refinement and substructure completion needs to be repeated, as it will not be enantiomorphically symmetric in the other hand. To facilitate this, Phaser runs the refinement and substructure completion in both hands [as does other experimental phasing software, e.g. Solve (Terwilliger & Berendzen, 1999 ▶) and autosharp (Vonrhein et al., 2006 ▶)]. The correct space group can then be found by inspection of the electron density maps; the density will only be interpretable in the correct space group. In cases with significant contributions from at least two types of anomalous scatterer in the substructure, the correct space group can also be identified by the log-likelihood gain. 3.2.2. Completing the substructure Peaks in log-likelihood gradient maps indicate the coordinates at which new atoms should be added to improve the log-likelihood gain. In the initial maps, the peaks are likely to indicate the positions of the strongest anomalous scatterers that are missing from the model. As the phasing improves, weaker anomalous scatterers, such as intrinsic sulfurs, will appear in the log-likelihood gradient maps, and finally, if the phasing is exceptional and the resolution high, non-anomalous scatterers will appear, since the SAD function includes a contribution from the real scattering. After refinement, atoms are excluded from the substructure if their occupancy drops below a tenth of the highest occupancy amongst those atoms of the same atom type (and therefore ). Excluded sites are flagged rather than permanently deleted, so that if a peak later appears in the log-likelihood gradient map at this position, the atom can be reinstated and prevented from being deleted again, in order to prevent oscillations in the addition of new sites between cycles and therefore lack of convergence of the substructure completion algorithm. New atoms are added automatically after a peak and hole search of the log-likelihood gradient maps. The cut-off for the consideration of a peak as a potential new atom is that its Z score be higher than 6 (by default) and also higher than the depth of the largest hole in the map, i.e. the largest hole is taken as an additional indication of the noise level of the map. The proximity of each potential new site to previous atoms is then calculated. If a peak is more than a cut-off distance (κ Å) of a previous site, the peak is added as a new atom with the average occupancy and B factor from the current set of sites. If the peak is within κ Å of an isotropic atom already present, the old atom is made anisotropic. Holes in the log-likelihood gradient map within κ Å of an isotropic atom also cause the atom’s B factor to be switched to anisotropic. However, if the peak or hole is within κ Å of an anisotropic atom already present, the peak or hole is ignored. If a peak is within κ Å of a previously excluded site, the excluded site is reinstated and flagged as not for deletion in order to prevent oscillations, as described above. At the end of the cycle of atom addition and isotropic to anisotropic atomic B-factor switching, new sites within 2κ Å of an old atom that is now anisotropic are then removed, since the peak may be absorbed by refining the anisotropic B factor; if not, it will be accepted as a new site in the next cycle of log-likelihood gradient completion. The distance κ may be input directly by the user, but by default it is the ‘optical resolution’ of the structure (κ = 0.715d min), but not less than 1 Å and no more than 10 Å. If the structure contains more than one significant anomalous scatterer, then log-likelihood gradient maps are calculated from each atom type, the maps compared and the atom type associated with each significant peak assigned from the map with the most significant peak at that location. 3.2.3. Initial real scattering model One of the reasons for including MR and SAD phasing within one software package is the ability to use MR solutions with the SAD phasing target to improve the phases. Since the SAD phasing target contains a contribution from the real scatterers, it is possible to use a partial MR model with no anomalous scattering as the initial atomic substructure used for SAD phasing. This approach is useful where there is a poor MR solution combined with a poor anomalous signal in the data. If the poor MR solution means that the structure cannot be phased from this model alone, and the poor anomalous signal means that the anomalous scatterers cannot be located in the data alone, then using the MR solution as the starting model for SAD phasing may provide enough phase information to locate the anomalous scatterers. The combined phase information will be stronger than from either source alone. To facilitate this method of structure solution, Phaser allows the user to input a partial structure model that will be interpreted in terms of its real scattering only and, following phasing with this substructure, to complete the anomalous scattering model from log-likelihood gradient maps as described above. 3.3. Input and output The fastest and most efficient way, in terms of development time, to link software together is using a scripting language, while using a compiled language is most efficient for intensive computation. Following the lead of the PHENIX project (Adams et al., 2002 ▶, 2004 ▶), Phaser uses Python (http://python.org) as the scripting language, C++ as the compiled language, and the Boost.Python library (http://boost.org/libs/python/) for linking C++ and Python. Other packages, notably X-PLOR (Brünger, 1993 ▶) and CNS (Brünger et al., 1998 ▶), have defined their own scripting languages, but the choice of Python ensures that the scripting language is maintained by an active community. Phaser functionality has mostly been made available to Python at the ‘mode’ level. However, some low-level SAD refinement routines in Phaser have been made available to Python directly, so that they can be easily incorporated into phenix.refine. A long tradition of CCP4 keyword-style input in established macromolecular crystallography software (almost exclusively written in Fortran) means that, for many users, this has been the familiar method of calling crystallographic software and is preferred to a Python interface. The challenge for the development of Phaser was to find a way of satisfying both keyword-style input and Python scripting with minimal increase in development time. Taking advantage of the C++ class structure allowed both to be implemented with very little additional code. Each keyword is managed by its own class. The input to each mode of Phaser is controlled by Input objects, which are derived from the set of keyword classes appropriate to the mode. The keyword classes are in turn derived from a CCP4base class containing the functionality for the keyword-style input. Each keyword class has a parse routine that calls the CCP4base class functions to parse the keyword input, stores the input parameters as local variables and then passes these parameters to a keyword class set function. The keyword class set functions check the validity and consistency of the input, throw errors where appropriate and finally set the keyword class’s member parameters. Alternatively, the keyword class set functions can be called directly from Python. These keyword classes are a standalone part of the Phaser code and have already been used in other software developments (Pointless; Evans, 2006 ▶). An Output object controls all text output from Phaser sent to standard output and to text files. Switches on the Output object give different output styles: CCP4-style for compatibility with CCP4 distribution, PHENIX-style for compatibility with the PHENIX interface, CIMR-style for development, XML-style output for developers of automation scripts and a ‘silent running’ option to be used when running Phaser from Python. In addition to the text output, where possible Phaser writes results to files in standard format; coordinates to ‘pdb’ files and reflection data (e.g. map coefficients) to ‘mtz’ files. Switches on the Output object control the writing of these files. 3.3.1. CCP4-style output CCP4-style output is a text log file sent to standard output. While this form of output is easily comprehensible to users, it is far from ideal as an output style for automation scripts. However, it is the only output style available from much of the established software that developers wish to use in their automation scripts, and it is common to use Unix tools such as ‘grep’ to extract key information. For this reason, the log files of Phaser have been designed to help developers who prefer to use this style of output. Phaser prints four levels of log file, summary, log, verbose and debug, as specified by user input. The important output information is in all four levels of file, but it is most efficient to work with the summary output. Phaser prints ‘SUCCESS’ and ‘FAILURE’ at the end of the log file to demarcate the exit state of the program, and also prints the names of any of the other output files produced by the program to the summary output, amongst other features. 3.3.2. XML output XML is becoming commonly used as a way of communicating between steps in an automation pipeline, because XML output can be added very simply by the program author and relatively simply by others with access to the source code. For this reason, Phaser also outputs an XML file when requested. The XML file encapsulates the mark-up within 〈phaser〉 tags. As there is no standard set of XML tags for crystallographic results, Phaser’s XML tags are mostly specific to Phaser but were arrived at after consultation with other developers of XML output for crystallographic software. 3.3.3. Python interface The most elegant and efficient way to run Phaser as part of an automation script is to call the functionality directly from Python. Using Phaser through the Python interface is similar to using Phaser through the keyword interface. Each mode of operation of Phaser described above is controlled by an Input object and its parameter set functions, which have been made available to Python with the Boost.Python library. Phaser is then run with a call to the ‘run-job’ function, which takes the Input object as a parameter. The ‘run-job’ function returns a Result object on completion, which can then be queried using its get functions. The Python Result object can be stored as a ‘pickled’ class structure directly to disk. Text is not sent to standard out in the CCP4 logfile way but may be redirected to another output stream. All Input and Result objects are fully documented. 4. Future developments Phaser will continue to be developed as a platform for implementing novel phasing algorithms and bringing the most effective approaches to the crystallographic community. Much work remains to be done formulating maximum likelihood functions with respect to noncrystallographic symmetry, to account for correlations in the data and to consider non-isomorphism, all with the aim of achieving the best possible initial electron density map. After a generation in which Fortran dominated crystallographic software code, C++ and Python have become the new standard. Several developments, including Phaser, PHENIX (Adams et al., 2002 ▶, 2004 ▶), Clipper (Cowtan, 2002 ▶) and mmdb (Krissinel et al., 2004 ▶), simultaneously chose C++ as the compiled language at their inception at the turn of the millennium. At about the same time, Python was chosen as a scripting language by PHENIX, ccp4mg (Potterton et al., 2002 ▶, 2004 ▶) and PyMol (DeLano, 2002 ▶), amongst others. Since then, other major software developments have also started or converted to C++ and Python, for example PyWarp (Cohen et al., 2004 ▶), MrBump (Keegan & Winn, 2007 ▶) and Pointless (Evans, 2006 ▶). The choice of C++ for software development was driven by the availability of free compilers, an ISO standard (International Standardization Organization et al., 1998 ▶), sophisticated dynamic memory management and the inherent strengths of using an object-oriented language. Python was equally attractive because of the strong community support, its object-oriented design, and the ability to link C++ and Python through the Boost.Python library or the SWIG library (http://www.swig.org/). Now that a ‘critical mass’ of developers has taken to using the new languages, C++ and Python are likely to remain the standard for crystallographic software for the current generation of crystallographic software developers. Phaser source code has been distributed directly by the authors (see http://www-structmed.cimr.cam.ac.uk/phaser for details) and through the PHENIX and CCP4 (Collaborative Computing Project, Number 4, 1994 ▶) software suites. The source code is released for several reasons, including that we believe source code is the most complete form of publication for the algorithms in Phaser. It is hoped that generous licensing conditions and source distribution will encourage the use of Phaser by other developers of crystallographic software and those writing crystallographic automation scripts. There are no licensing restrictions on the use of Phaser in macromolecular crystallography pipelines by other developers, and the license conditions even allow developers to alter the source code (although not to redistribute it). We welcome suggestions for improvements to be incorporated into new versions. Compilation of Phaser requires the computational crystallography toolbox (cctbx; Grosse-Kunstleve & Adams, 2003 ▶), which includes a distribution of the cmtz library (Winn et al., 2002 ▶). The Boost libraries (http://boost.org/) are required for access to the functionality from Python. Phaser runs under a wide range of operating systems including Linux, Irix, OSF1/Tru64, MacOS-X and Windows, and precompiled executables are available for these platforms when only keyword-style access (and not Python access) is required. Graphical user interfaces to Phaser are available for both the PHENIX and the CCP4 suites. User support is available through PHENIX, CCP4 and from the authors (email cimr-phaser@lists.cam.ac.uk).
              • Record: found
              • Abstract: found
              • Article: not found

              cryoSPARC: algorithms for rapid unsupervised cryo-EM structure determination

              A software tool, cryoSPARC, addresses the speed bottleneck in cryo-EM image processing, enabling automated macromolecular structure determination in hours on a desktop computer without requiring a starting model.

                Author and article information

                Proc Natl Acad Sci U S A
                Proc Natl Acad Sci U S A
                Proceedings of the National Academy of Sciences of the United States of America
                National Academy of Sciences
                9 March 2023
                14 March 2023
                9 March 2023
                : 120
                : 11
                : e2218238120
                [1] aHHMI, Stanford University School of Medicine , Stanford, CA 94305
                [2] bDepartment of Molecular and Cellular Physiology, Stanford University School of Medicine , Stanford, CA 94305
                [3] cDepartment of Structural Biology, Stanford University School of Medicine , Stanford, CA 94305
                [4] dGraduate School of Medicine, Dentistry and Pharmaceutical Sciences, Okayama University , Okayama 700-8530, Japan
                [5] eDepartment of Early Discovery Biochemistry, Genentech , South San Francisco, CA 94080
                [6] fPrincess Máxima Center for Pediatric Oncology , 3584 CS Utrecht, Netherlands
                Author notes
                2To whom correspondence may be addressed. Email: hannoush.rami@ 123456gene.com or kcgarcia@ 123456stanford.edu .

                Contributed by K. Christopher Garcia; received October 25, 2022; accepted February 9, 2023; reviewed by Xiaochun Li and Sachdev S. Sidhu

                1N.T., S. Hwang, D.W., and S. Hansen contributed equally to this work.

                Author information
                Copyright © 2023 the Author(s). Published by PNAS.

                This open access article is distributed under Creative Commons Attribution-NonCommercial-NoDerivatives License 4.0 (CC BY).

                : 25 October 2022
                : 09 February 2023
                Page count
                Pages: 12, Words: 9438
                Funded by: HHS | National Institutes of Health (NIH), FundRef 100000002;
                Award ID: R01DK115728
                Award Recipient : K. Christopher Garcia
                Funded by: Howard Hughes Medical Institute (HHMI), FundRef 100000011;
                Award ID: none
                Award Recipient : K. Christopher Garcia
                Funded by: Ludwig Institute for Cancer Research (LICR), FundRef 100009729;
                Award ID: none
                Award Recipient : K. Christopher Garcia
                research-article, Research Article
                dev-bio, Developmental Biology
                Biological Sciences
                Developmental Biology

                wnt signaling,cryo-em,protein engineering,structural biology,crystallography


                Comment on this article