2
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: not found
      • Article: not found

      Structural and biological properties of carbon nanotube composite films

      , ,
      Materials Science and Engineering: B
      Elsevier BV

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Related collections

          Most cited references26

          • Record: found
          • Abstract: found
          • Article: not found

          Synthesis of large arrays of well-aligned carbon nanotubes on glass

          Ren, Huang, Xu (1998)
          Free-standing aligned carbon nanotubes have previously been grown above 700 degreesC on mesoporous silica embedded with iron nanoparticles. Here, carbon nanotubes aligned over areas up to several square centimeters were grown on nickel-coated glass below 666 degreesC by plasma-enhanced hot filament chemical vapor deposition. Acetylene gas was used as the carbon source and ammonia gas was used as a catalyst and dilution gas. Nanotubes with controllable diameters from 20 to 400 nanometers and lengths from 0. 1 to 50 micrometers were obtained. Using this method, large panels of aligned carbon nanotubes can be made under conditions that are suitable for device fabrication.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Large-Scale Synthesis of Aligned Carbon Nanotubes

              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Continuous production of aligned carbon nanotubes: a step closer to commercial realization

                Bookmark

                Author and article information

                Journal
                Materials Science and Engineering: B
                Materials Science and Engineering: B
                Elsevier BV
                09215107
                November 2005
                November 2005
                : 123
                : 2
                : 123-129
                Article
                10.1016/j.mseb.2005.07.007
                c0e3eaf0-27ba-44a6-92bd-1194ae8e02cb
                © 2005

                http://www.elsevier.com/tdm/userlicense/1.0/

                History

                Comments

                Comment on this article