0
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Giant electrochemical actuation in a nanoporous silicon-polypyrrole hybrid material

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          A silicon-polymer hybrid shows large, reversible electrostrain at remarkably small operation voltages in aqueous electrolyte.

          Abstract

          The absence of piezoelectricity in silicon makes direct electromechanical applications of this mainstream semiconductor impossible. Integrated electrical control of the silicon mechanics, however, would open up new perspectives for on-chip actuorics. Here, we combine wafer-scale nanoporosity in single-crystalline silicon with polymerization of an artificial muscle material inside pore space to synthesize a composite that shows macroscopic electrostrain in aqueous electrolyte. The voltage-strain coupling is three orders of magnitude larger than the best-performing ceramics in terms of piezoelectric actuation. We trace this huge electroactuation to the concerted action of 100 billions of nanopores per square centimeter cross section and to potential-dependent pressures of up to 150 atmospheres at the single-pore scale. The exceptionally small operation voltages (0.4 to 0.9 volts), along with the sustainable and biocompatible base materials, make this hybrid promising for bioactuator applications.

          Related collections

          Most cited references40

          • Record: found
          • Abstract: found
          • Article: not found

          Lead-free piezoceramics.

          Lead has recently been expelled from many commercial applications and materials (for example, from solder, glass and pottery glaze) owing to concerns regarding its toxicity. Lead zirconium titanate (PZT) ceramics are high-performance piezoelectric materials, which are widely used in sensors, actuators and other electronic devices; they contain more than 60 weight per cent lead. Although there has been a concerted effort to develop lead-free piezoelectric ceramics, no effective alternative to PZT has yet been found. Here we report a lead-free piezoelectric ceramic with an electric-field-induced strain comparable to typical actuator-grade PZT. We achieved this through the combination of the discovery of a morphotropic phase boundary in an alkaline niobate-based perovskite solid solution, and the development of a processing route leading to highly textured polycrystals. The ceramic exhibits a piezoelectric constant d33 (the induced charge per unit force applied in the same direction) of above 300 picocoulombs per newton (pC N(-1)), and texturing the material leads to a peak d33 of 416 pC N(-1). The textured material also exhibits temperature-independent field-induced strain characteristics.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Conductive polymers: towards a smart biomaterial for tissue engineering.

            Developing stimulus-responsive biomaterials with easy-to-tailor properties is a highly desired goal of the tissue engineering community. A novel type of electroactive biomaterial, the conductive polymer, promises to become one such material. Conductive polymers are already used in fuel cells, computer displays and microsurgical tools, and are now finding applications in the field of biomaterials. These versatile polymers can be synthesised alone, as hydrogels, combined into composites or electrospun into microfibres. They can be created to be biocompatible and biodegradable. Their physical properties can easily be optimized for a specific application through binding biologically important molecules into the polymer using one of the many available methods for their functionalization. Their conductive nature allows cells or tissue cultured upon them to be stimulated, the polymers' own physical properties to be influenced post-synthesis and the drugs bound in them released, through the application of an electrical signal. It is thus little wonder that these polymers are becoming very important materials for biosensors, neural implants, drug delivery devices and tissue engineering scaffolds. Focusing mainly on polypyrrole, polyaniline and poly(3,4-ethylenedioxythiophene), we review conductive polymers from the perspective of tissue engineering. The basic properties of conductive polymers, their chemical and electrochemical synthesis, the phenomena underlying their conductivity and the ways to tailor their properties (functionalization, composites, etc.) are discussed.
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              What is the Young's Modulus of Silicon?

                Bookmark

                Author and article information

                Journal
                Sci Adv
                Sci Adv
                SciAdv
                advances
                Science Advances
                American Association for the Advancement of Science
                2375-2548
                September 2020
                30 September 2020
                : 6
                : 40
                : eaba1483
                Affiliations
                [1 ]Physics of Materials and High-Resolution X-Ray Analytics of the Structural Dynamics and Function of Matter, Hamburg University of Technology TUHH, 21073 Hamburg, Germany.
                [2 ]Institute of Materials Research, Materials Mechanics, Helmholtz-Zentrum Geesthacht, 21502 Geesthacht, Germany.
                [3 ]Deutsches Elektronen-Synchrotron DESY, 22607 Hamburg, Germany.
                [4 ]Physics Department, University of Hamburg, 20355 Hamburg, Germany.
                [5 ]Electron Microscopy Unit, Hamburg University of Technology, 21073 Hamburg, Germany.
                [6 ]Center for Hybrid Nanostructures CHyN, University of Hamburg, 22607 Hamburg, Germany.
                Author notes
                [* ]Corresponding author. Email: patrick.huber@ 123456tuhh.de
                Author information
                http://orcid.org/0000-0002-1729-459X
                http://orcid.org/0000-0003-1003-7299
                http://orcid.org/0000-0002-2422-0433
                http://orcid.org/0000-0002-3770-6344
                http://orcid.org/0000-0002-4252-9207
                http://orcid.org/0000-0002-2126-9100
                Article
                aba1483
                10.1126/sciadv.aba1483
                7527211
                32998892
                c49cb628-d359-4a39-bee8-d007c9c0f821
                Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution License 4.0 (CC BY).

                This is an open-access article distributed under the terms of the Creative Commons Attribution license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

                History
                : 08 November 2019
                : 14 August 2020
                Funding
                Funded by: doi http://dx.doi.org/10.13039/501100001659, Deutsche Forschungsgemeinschaft;
                Award ID: 192346071
                Categories
                Research Article
                Research Articles
                SciAdv r-articles
                Materials Science
                Custom metadata
                Sef Rio

                Comments

                Comment on this article