74
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storage

      1 , 2 , 3 , 4
      Energy & Environmental Science
      Royal Society of Chemistry (RSC)

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Large scale storage technologies are vital to increase the share of renewable electricity in the global energy mix.

          Abstract

          Increased interest in electrical energy storage is in large part driven by the explosive growth in intermittent renewable sources such as wind and solar as well as the global drive towards decarbonizing the energy economy. However, the existing electrical grid systems in place globally are not equipped to handle mass scale integration of intermittent energy sources without serious disruptions to the grid. It is generally agreed that more than 20% penetration from intermittent renewables can greatly destabilize the grid system. Certainly, large-scale electrical energy storage systems may alleviate many of the inherent inefficiencies and deficiencies in the grid system, and help improve grid reliability, facilitate full integration of intermittent renewable sources, and effectively manage power generation. Electrical energy storage offers two other important advantages. First, it decouples electricity generation from the load or electricity user, thus making it easier to regulate supply and demand. Second, it allows distributed storage opportunities for local grids, or microgrids, which greatly improve grid security, and hence, energy security. Currently, there is only 170 GW of installed storage capacity around the world, but more than 96% is provided by pumped-hydro, which is site-constrained and not available widely. Hence, a battery of technologies is needed to fully address the widely varying needs for large-scale electrical storage. The focus of this article is to provide a comprehensive review of a broad portfolio of electrical energy storage technologies, materials and systems, and present recent advances and progress as well as challenges yet to overcome. The article discusses the status and options for mechanical, thermal, electrochemical, and chemical storage. Where appropriate, it also provides tutorial level background information on fundamental principles for the interested non-expert. It is hoped that this article is of interest to the uninitiated as well as active scientists and engineers engaged in energy storage technologies, with particular focus on large-scale electrical energy storage.

          Related collections

          Most cited references326

          • Record: found
          • Abstract: found
          • Article: not found

          Opportunities and challenges for a sustainable energy future.

          Access to clean, affordable and reliable energy has been a cornerstone of the world's increasing prosperity and economic growth since the beginning of the industrial revolution. Our use of energy in the twenty-first century must also be sustainable. Solar and water-based energy generation, and engineering of microbes to produce biofuels are a few examples of the alternatives. This Perspective puts these opportunities into a larger context by relating them to a number of aspects in the transportation and electricity generation sectors. It also provides a snapshot of the current energy landscape and discusses several research and development opportunities and pathways that could lead to a prosperous, sustainable and secure energy future for the world.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Nonaqueous liquid electrolytes for lithium-based rechargeable batteries.

            Kang Xu (2004)
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review.

              The lithium metal battery is strongly considered to be one of the most promising candidates for high-energy-density energy storage devices in our modern and technology-based society. However, uncontrollable lithium dendrite growth induces poor cycling efficiency and severe safety concerns, dragging lithium metal batteries out of practical applications. This review presents a comprehensive overview of the lithium metal anode and its dendritic lithium growth. First, the working principles and technical challenges of a lithium metal anode are underscored. Specific attention is paid to the mechanistic understandings and quantitative models for solid electrolyte interphase (SEI) formation, lithium dendrite nucleation, and growth. On the basis of previous theoretical understanding and analysis, recently proposed strategies to suppress dendrite growth of lithium metal anode and some other metal anodes are reviewed. A section dedicated to the potential of full-cell lithium metal batteries for practical applications is included. A general conclusion and a perspective on the current limitations and recommended future research directions of lithium metal batteries are presented. The review concludes with an attempt at summarizing the theoretical and experimental achievements in lithium metal anodes and endeavors to realize the practical applications of lithium metal batteries.
                Bookmark

                Author and article information

                Journal
                EESNBY
                Energy & Environmental Science
                Energy Environ. Sci.
                Royal Society of Chemistry (RSC)
                1754-5692
                1754-5706
                October 10 2018
                2018
                : 11
                : 10
                : 2696-2767
                Affiliations
                [1 ]Department of Materials Science and Engineering
                [2 ]Stanford University
                [3 ]Stanford
                [4 ]USA
                Article
                10.1039/C8EE01419A
                c59f8425-f12d-4b87-962b-2429910959bc
                © 2018

                http://rsc.li/journals-terms-of-use

                History

                Comments

                Comment on this article