Reproducibility of a peripheral quantitative computed tomography scan protocol to measure the material properties of the second metatarsal

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

Background

Peripheral quantitative computed tomography (pQCT) is an established technology that allows for the measurement of the material properties of bone. Alterations to bone architecture are associated with an increased risk of fracture. Further pQCT research is necessary to identify regions of interest that are prone to fracture risk in people with chronic diseases. The second metatarsal is a common site for the development of insufficiency fractures, and as such the aim of this study was to assess the reproducibility of a novel scanning protocol of the second metatarsal using pQCT.

Methods

Eleven embalmed cadaveric leg specimens were scanned six times; three times with and without repositioning. Each foot was positioned on a custom-designed acrylic foot plate to permit unimpeded scans of the region of interest. Sixty-six scans were obtained at 15% (distal) and 50% (mid shaft) of the second metatarsal. Voxel size and scan speed were reduced to 0.40 mm and 25 mm.sec ^-1. The reference line was positioned at the most distal portion of the 2 ^nd metatarsal. Repeated measurements of six key variables related to bone properties were subject to reproducibility testing. Data were log transformed and reproducibility of scans were assessed using intraclass correlation coefficients (ICC) and coefficients of variation (CV%).

Results

Reproducibility of the measurements without repositioning were estimated as: trabecular area (ICC 0.95; CV% 2.4), trabecular density (ICC 0.98; CV% 3.0), Strength Strain Index (SSI) - distal (ICC 0.99; CV% 5.6), cortical area (ICC 1.0; CV% 1.5), cortical density (ICC 0.99; CV% 0.1), SSI – mid shaft (ICC 1.0; CV% 2.4). Reproducibility of the measurements after repositioning were estimated as: trabecular area (ICC 0.96; CV% 2.4), trabecular density (ICC 0.98; CV% 2.8), SSI - distal (ICC 1.0; CV% 3.5), cortical area (ICC 0.99; CV%2.4), cortical density (ICC 0.98; CV% 0.8), SSI – mid shaft (ICC 0.99; CV% 3.2).

Conclusions

The scanning protocol generated excellent reproducibility for key bone properties measured at the distal and mid-shaft regions of the 2 ^nd metatarsal. This protocol extends the capabilities of pQCT to evaluate bone quality in people who may be at an increased risk of metatarsal insufficiency fractures.

Related collections

Most cited references 18

Record: found
Abstract: found
Article: not found

Quantitative computed tomography.

Judith E Adams (2009)

Quantitative computed tomography (QCT) was introduced in the mid 1970s. The technique is most commonly applied to 2D slices in the lumbar spine to measure trabecular bone mineral density (BMD; mg/cm(3)). Although not as widely utilized as dual-energy X-ray absortiometry (DXA) QCT has some advantages when studying the skeleton (separate measures of cortical and trabecular BMD; measurement of volumetric, as opposed to 'areal' DXA-BMDa, so not size dependent; geometric and structural parameters obtained which contribute to bone strength). A limitation is that the World Health Organisation (WHO) definition of osteoporosis in terms of bone densitometry (T score -2.5 or below using DXA) is not applicable. QCT can be performed on conventional body CT scanners, or at peripheral sites (radius, tibia) using smaller, less expensive dedicated peripheral CT scanners (pQCT). Although the ionising radiation dose of spinal QCT is higher than for DXA, the dose compares favorably with those of other radiographic procedures (spinal radiographs) performed in patients suspected of having osteoporosis. The radiation dose from peripheral QCT scanners is negligible. Technical developments in CT (spiral multi-detector CT; improved spatial resolution) allow rapid acquisition of 3D volume images which enable QCT to be applied to the clinically important site of the proximal femur, more sophisticated analysis of cortical and trabecular bone, the imaging of trabecular structure and the application of finite element analysis (FEA). Such research studies contribute importantly to the understanding of bone growth and development, the effect of disease and treatment on the skeleton and the biomechanics of bone strength and fracture.

0 comments Cited 85 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Stress fractures in athletes. A study of 320 cases.

G Matheson, D B Clement, D C McKenzie … (2015)

We analyzed cases of 320 athletes with bone scan-positive stress fractures (M = 145, F = 175) seen over 3.5 years and assessed the results of conservative management. The most common bone injured was the tibia (49.1%), followed by the tarsals (25.3%), metatarsals (8.8%), femur (7.2%), fibula (6.6%), pelvis (1.6%), sesamoids (0.9%), and spine (0.6%). Stress fractures were bilateral in 16.6% of cases. A significant age difference among the sites was found, with femoral and tarsal stress fractures occurring in the oldest, and fibular and tibial stress fractures in the youngest. Running was the most common sport at the time of injury but there was no significant difference in weekly running mileage and affected sites. A history of trauma was significantly more common in the tarsal bones. The average time to diagnosis was 13.4 weeks (range, 1 to 78) and the average time to recovery was 12.8 weeks (range, 2 to 96). Tarsal stress fractures took the longest time to diagnose and recover. Varus alignment was found frequently, but there was no significant difference among the fracture sites, and varus alignment did not affect time to diagnosis or recovery. Radiographs were taken in 43.4% of cases at the time of presentation but were abnormal in only 9.8%. A group of bone scan-positive stress fractures of the tibia, fibula, and metatarsals (N = 206) was compared to a group of clinically diagnosed stress fractures of the same bone groups (N = 180), and no significant differences were found. Patterns of stress fractures in athletes are different from those found in military recruits. Using bone scan for diagnosis indicates that tarsal stress fractures are much more common than previously realized. Time to diagnosis and recovery is site-dependent. Technetium99 bone scan is the single most useful diagnostic aid. Conservative treatment of stress fractures in athletes is satisfactory in the majority of cases.

0 comments Cited 45 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Risk factors for clinical stress fractures in male military recruits: a prospective cohort study.

Harri Suominen, Matti J. Välimäki, Timo Sahi … (2005)

This prospective study was aimed at evaluating risk factors for symptomatic stress fractures among 179 Finnish male military recruits, aged 18 to 20 years. The subjects were studied in the very beginning of the military service of 6 to 12 months in summer. Bone mineral content (BMC) and density (BMD) were measured by dual energy X-ray absorptiometry (DXA) at the lumbar spine and at the hip and heel ultrasound investigation was performed. Blood was sampled for determination of serum total and free testosterone, total and free estradiol, sex hormone-binding globulin (SHBG), procollagen type I N propeptide, total and carboxylated osteocalcin, tartrate-resistant acid phosphatase 5b, 25-hydroxyvitamin D (25-OHD), and intact parathyroid hormone (iPTH), as well as for studying the XbaI and PvuII polymorphisms of the estrogen receptor gene and the CAG repeat polymorphism of the androgen receptor gene. Urine was collected for the determination of N-terminal cross-linking telopeptide of type I collagen. Muscle strength was measured and Cooper's test was performed. Current exercise, smoking, calcium intake, and alcohol consumption were recorded using a questionnaire. During military service, 15 men experienced a stress fracture, diagnosed with X-ray in 14 and with nuclear magnetic resonance in one man. Those who experienced a fracture were taller than those who did not (P = 0.047). The result of Cooper's test was worse in the fracture group than in the non-fracture group (P = 0.026). Femoral neck and total hip BMC and BMD, adjusted for age, weight, height, exercise, smoking, and alcohol and calcium intake were lower (P = 0.021-0.041) for the fracture group. Stress fractures associated with higher iPTH levels (P = 0.022) but not with lower 25-OHD levels. Bone turnover markers as well as sex hormone and SHBG levels were similar for men with and without stress fracture. There was no difference in the genetic analyses between the groups. In conclusion, tall height, poor physical conditioning, low hip BMC and BMD, as well as high serum PTH level are risk factors for stress fractures in male Finnish military recruits. Given the poor vitamin D status of young Finnish men, intervention studies of vitamin D supplementation to lower serum PTH levels and to possibly reduce the incidence of stress fractures are warranted.

0 comments Cited 44 times – based on 0 reviews      Review now

Bookmark

All references

Author and article information

Contributors

Elodie Chaplais

David Greene

Anita Hood

Scott Telfer

Verona du Toit

Davinder Singh-Grewal

Joshua Burns

Keith Rome

Daniel J Schiferl

Gordon J Hendry

Journal

Journal ID (nlm-ta): BMC Musculoskelet Disord

Journal ID (iso-abbrev): BMC Musculoskelet Disord

Title: BMC Musculoskeletal Disorders

Publisher: BioMed Central

ISSN (Electronic): 1471-2474

Publication date Collection: 2014

Publication date (Electronic): 19 July 2014

Volume: 15

Page: 242

Affiliations

[1 ]School of Exercise Science, Australian Catholic University, Strathfield, NSW, Australia

[2 ]Clermont Université, Laboratoire des Adaptations Métaboliques à l'Exercice en Conditions Physiologiques et Pathologiques, Clermont-Ferrand, France

[3 ]Podiatry Department, Concord Hospital, South Western Sydney Local Health District, Sydney, NSW, Australia

[4 ]Institute for Applied Health Research, Glasgow Caledonian University, Glasgow G4 0BA, UK

[5 ]School of Medicine, University of Western Sydney, Penrith, NSW, Australia

[6 ]The University of Sydney Discipline of Paediatrics and Child Health, Sydney, NSW, Australia

[7 ]The University of New South Wales School of Women and Children’s Health, Sydney, NSW, Australia

[8 ]The Sydney Children’s Hospitals Network Randwick and Westmead Department of Rheumatology, Sydney, NSW, Australia

[9 ]The University of Sydney and Sydney Children’s Hospitals Network (Randwick and Westmead), Sydney, NSW, Australia

[10 ]Department of Podiatry, Health and Rehabilitation Research Institute, School of Rehabilitation & Occupational Studies, AUT, Auckland, New Zealand

[11 ]Bone Diagnostic Inc, Fort Atkinson, WI, USA

[12 ]School of Science & Health, University of Western Sydney, Penrith, NSW, Australia

Article

Publisher ID: 1471-2474-15-242

DOI: 10.1186/1471-2474-15-242

PMC ID: 4108224

PubMed ID: 25037451

SO-VID: d4dff18d-d1cf-4018-9be7-c7ea0f148f22

License:

This is an Open Access article distributed under the terms of the Creative Commons Attribution License ( http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver ( http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reproducibility of a peripheral quantitative computed tomography scan protocol to measure the material properties of the second metatarsal

Read this article at

Abstract

Background

Methods

Results

Conclusions

Related collections

Orthopedics

Most cited references 18

Quantitative computed tomography.

Stress fractures in athletes. A study of 320 cases.

Risk factors for clinical stress fractures in male military recruits: a prospective cohort study.

Author and article information

Contributors

Journal

Affiliations

Article

History

Categories

Comments

Comment on this article

Similar content 84

Cited by 5

Most referenced authors 183