14
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Characterization of normative hand movements during two functional upper limb tasks

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Background

          Dexterous hand function is crucial for completing activities of daily living (ADLs), which typically require precise hand-object interactions. Kinematic analyses of hand trajectory, hand velocity, and grip aperture provide valuable mechanistic insights into task performance, but there is a need for standardized tasks representative of ADLs that are amenable to motion capture and show consistent performance in non-disabled individuals. Our objective was to develop two standardized functional upper limb tasks and to quantitatively characterize the kinematics of normative hand movement.

          Methods

          Twenty non-disabled participants were recruited to perform two tasks: the Pasta Box Task and Cup Transfer Task. A 12-camera motion capture system was used to collect kinematic data from which hand movement and grip aperture measures were calculated. Measures reported for reach-grasp and transport-release segments were hand distance travelled, hand trajectory variability, movement time, peak and percent-to-peak hand velocity, number of movement units, peak and percent-to-peak grip aperture, and percent-to-peak hand deceleration. A between-session repeatability analysis was conducted on 10 participants.

          Results

          Movement times were longer for transport-release compared to reach-grasp for every movement. Hand and grip aperture measures had low variability, with 55 out of 63 measures showing good repeatability (ICC > 0.75). Cross-body movements in the Pasta Box Task had longer movement times and reduced percent-to-peak hand velocity values. The Cup Transfer Task showed decoupling of peak grip aperture and peak hand deceleration for all movements. Movements requiring the clearing of an obstacle while transporting an object displayed a double velocity peak and typically a longer deceleration phase.

          Discussion

          Normative hand kinematics for two standardized functional tasks challenging various aspects of hand-object interactions important for ADLs showed excellent repeatability. The consistency in normative task performance across a variety of task demands shows promise as a potential outcome assessment for populations with upper limb impairment.

          Related collections

          Most cited references43

          • Record: found
          • Abstract: found
          • Article: not found

          Quantifying test-retest reliability using the intraclass correlation coefficient and the SEM.

          Reliability, the consistency of a test or measurement, is frequently quantified in the movement sciences literature. A common metric is the intraclass correlation coefficient (ICC). In addition, the SEM, which can be calculated from the ICC, is also frequently reported in reliability studies. However, there are several versions of the ICC, and confusion exists in the movement sciences regarding which ICC to use. Further, the utility of the SEM is not fully appreciated. In this review, the basics of classic reliability theory are addressed in the context of choosing and interpreting an ICC. The primary distinction between ICC equations is argued to be one concerning the inclusion (equations 2,1 and 2,k) or exclusion (equations 3,1 and 3,k) of systematic error in the denominator of the ICC equation. Inferential tests of mean differences, which are performed in the process of deriving the necessary variance components for the calculation of ICC values, are useful to determine if systematic error is present. If so, the measurement schedule should be modified (removing trials where learning and/or fatigue effects are present) to remove systematic error, and ICC equations that only consider random error may be safely used. The use of ICC values is discussed in the context of estimating the effects of measurement error on sample size, statistical power, and correlation attenuation. Finally, calculation and application of the SEM are discussed. It is shown how the SEM and its variants can be used to construct confidence intervals for individual scores and to determine the minimal difference needed to be exhibited for one to be confident that a true change in performance of an individual has occurred.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            A performance test for assessment of upper limb function in physical rehabilitation treatment and research.

            R C Lyle (1981)
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              The timing of natural prehension movements.

              Prehension movements were studied by film in 7 adult subjects. Transportation of the hand to the target-object location had features very similar to any aiming arm movement, that is, it involved a fast-velocity initial phase and a low-velocity final phase. The peak velocity of the movement was highly correlated with its amplitude, although total movement duration tended to remain invariant when target distance was changed. The low-velocity phase consistently began after about 75% of movement time had elapsed. This ration was maintained for different movement amplitudes. Formation of the finger grip occurred during hand transportation. Fingers were first stretched and then began to close in anticipation to contact with the object. The onset of the closure phase was highly correlated to the beginning of the low velocity phase of transportation. This pattern for both transportation and finger grip formation was maintained in conditions whether visual feedback from the moving limb was present or not. Implications of these findings for the central programming of multisegmental movements are discussed.
                Bookmark

                Author and article information

                Contributors
                Role: Data curationRole: Formal analysisRole: InvestigationRole: SoftwareRole: VisualizationRole: Writing – original draft
                Role: Data curationRole: Formal analysisRole: InvestigationRole: Software
                Role: Data curationRole: Investigation
                Role: Methodology
                Role: ConceptualizationRole: SoftwareRole: Writing – review & editing
                Role: ConceptualizationRole: Formal analysisRole: Funding acquisitionRole: MethodologyRole: ResourcesRole: SoftwareRole: ValidationRole: VisualizationRole: Writing – review & editing
                Role: ConceptualizationRole: MethodologyRole: ResourcesRole: SupervisionRole: ValidationRole: VisualizationRole: Writing – original draftRole: Writing – review & editing
                Role: ConceptualizationRole: Funding acquisitionRole: MethodologyRole: Project administrationRole: ResourcesRole: SupervisionRole: ValidationRole: Writing – original draftRole: Writing – review & editing
                Role: Editor
                Journal
                PLoS One
                PLoS ONE
                plos
                plosone
                PLoS ONE
                Public Library of Science (San Francisco, CA USA )
                1932-6203
                21 June 2018
                2018
                : 13
                : 6
                : e0199549
                Affiliations
                [1 ] Department of Biomedical Engineering, Faculty of Medicine and Dentistry, University of Alberta, Edmonton, Alberta, Canada
                [2 ] Faculty of Kinesiology, Sport, and Recreation, University of Alberta, Edmonton, Alberta, Canada
                [3 ] Glenrose Rehabilitation Hospital, Alberta Health Services, Edmonton, Alberta, Canada
                [4 ] Department of Medicine, Faculty of Medicine and Dentistry, University of Alberta, Edmonton, Alberta, Canada
                [5 ] Department of Mechanical Engineering, Faculty of Engineering, University of Alberta, Edmonton, Alberta, Canada
                Universite de Nantes, FRANCE
                Author notes

                Competing Interests: The authors have declared that no competing interests exist.

                Author information
                http://orcid.org/0000-0003-0788-0568
                Article
                PONE-D-17-44585
                10.1371/journal.pone.0199549
                6013217
                29928022
                e05b9fbe-f2f0-4c03-9cef-6e1830464919
                © 2018 Valevicius et al

                This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

                History
                : 21 December 2017
                : 8 June 2018
                Page count
                Figures: 5, Tables: 7, Pages: 21
                Funding
                Funded by: funder-id http://dx.doi.org/10.13039/100006502, Defense Sciences Office, DARPA;
                Award ID: N66001-15-C-4015
                Award Recipient :
                Funded by: National Sciences and Engineering Research Council of Canada
                Award ID: RGPIN-2014-04666; RGPIN-2014-05248
                Award Recipient :
                This work was sponsored by the Defense Advanced Research Projects Agency (DARPA) BTO under the auspices of Dr. Doug Weber and Dr. Al Emondi through the DARPA Contracts Management Office; Grant/Contract No. N66001-15-C-4015 (JSH). Partial funding support was also received through Discovery Grants from the Natural Sciences and Engineering Research Council of Canada (RGPIN-2014-04666; RGPIN-2014-05248) (AHV). The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
                Categories
                Research Article
                Biology and Life Sciences
                Anatomy
                Musculoskeletal System
                Limbs (Anatomy)
                Arms
                Hands
                Medicine and Health Sciences
                Anatomy
                Musculoskeletal System
                Limbs (Anatomy)
                Arms
                Hands
                Biology and Life Sciences
                Anatomy
                Musculoskeletal System
                Medicine and Health Sciences
                Anatomy
                Musculoskeletal System
                Physical Sciences
                Physics
                Classical Mechanics
                Kinematics
                Physical Sciences
                Physics
                Classical Mechanics
                Deceleration
                Physical Sciences
                Physics
                Classical Mechanics
                Motion
                Velocity
                Research and Analysis Methods
                Mathematical and Statistical Techniques
                Statistical Methods
                Analysis of Variance
                Physical Sciences
                Mathematics
                Statistics (Mathematics)
                Statistical Methods
                Analysis of Variance
                Biology and Life Sciences
                Anatomy
                Musculoskeletal System
                Limbs (Anatomy)
                Arms
                Medicine and Health Sciences
                Anatomy
                Musculoskeletal System
                Limbs (Anatomy)
                Arms
                Physical Sciences
                Physics
                Classical Mechanics
                Motion
                Custom metadata
                All relevant data are within the paper and its Supporting Information files (S3 Data_Supplementary Data File).

                Uncategorized
                Uncategorized

                Comments

                Comment on this article