20
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Facile electrosynthesis of silicon carbide nanowires from silica/carbon precursors in molten salt

      research-article
      1 , 2 , , 2 , 3 , 1 , , 1 , 4
      Scientific Reports
      Nature Publishing Group UK

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Silicon carbide nanowires (SiC NWs) have attracted intensive attention in recent years due to their outstanding performances in many applications. A large-scale and facile production of SiC NWs is critical to its successful application. Here, we report a simple method for the production of SiC NWs from inexpensive and abundantly available silica/carbon (SiO 2/C) precursors in molten calcium chloride. The solid-to-solid electroreduction and dissolution-electrodeposition mechanisms can easily lead to the formation of homogenous SiC NWs. This template/catalyst-free approach greatly simplifies the synthesis procedure compared to conventional methods. This general strategy opens a direct electrochemical route for the conversion of SiO 2/C into SiC NWs, and may also have implications for the electrosynthesis of other micro/nanostructured metal carbides/composites from metal oxides/carbon precursors.

          Related collections

          Most cited references41

          • Record: found
          • Abstract: found
          • Article: not found

          Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride

          Chen, Farthing, Fray (2000)
          Many reactive metals are difficult to prepare in pure form without complicated and expensive procedures. Although titanium has many desirable properties (it is light, strong and corrosion-resistant), its use has been restricted because of its high processing cost. In the current pyrometallurgical process--the Kroll process--the titanium minerals rutile and ilmenite are carbochlorinated to remove oxygen, iron and other impurities, producing a TiCl4 vapour. This is then reduced to titanium metal by magnesium metal; the by-product MgCl2 is removed by vacuum distillation. The prediction that this process would be replaced by an electrochemical route has not been fulfilled; attempts involving the electro-deposition of titanium from ionic solutions have been hampered by difficulties in eliminating the redox cycling of multivalent titanium ions and in handling very reactive dendritic products. Here we report an electrochemical method for the direct reduction of solid TiO2, in which the oxygen is ionized, dissolved in a molten salt and discharged at the anode, leaving pure titanium at the cathode. The simplicity and rapidity of this process compared to conventional routes should result in reduced production costs and the approach should be applicable to a wide range of metal oxides.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Recent progress in synthesis, properties and potential applications of SiC nanomaterials

              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Materials science. Silicon carbide as a platform for power electronics.

                Bookmark

                Author and article information

                Contributors
                xzou@utexas.edu
                luxg@shu.edu.cn
                Journal
                Sci Rep
                Sci Rep
                Scientific Reports
                Nature Publishing Group UK (London )
                2045-2322
                30 August 2017
                30 August 2017
                2017
                : 7
                : 9978
                Affiliations
                [1 ]ISNI 0000 0001 2323 5732, GRID grid.39436.3b, State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, ; Shanghai, 200072 China
                [2 ]ISNI 0000 0004 1936 9924, GRID grid.89336.37, Center for Electrochemistry, Department of Chemistry, The University of Texas at Austin, ; Austin, Texas 78712 USA
                [3 ]ISNI 0000 0004 1936 9924, GRID grid.89336.37, Microelectronics Research Center, Department of Electrical and Computer Engineering, The University of Texas at Austin, ; Austin, Texas 78712 USA
                [4 ]ISNI 0000000121682483, GRID grid.8186.7, Institute of Mathematics and Physics, Aberystwyth University, ; Aberystwyth, SY23 3BZ UK
                Article
                10587
                10.1038/s41598-017-10587-5
                5577148
                e19f6867-a977-46cf-b1ae-672fe70ca714
                © The Author(s) 2017

                Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

                History
                : 31 May 2017
                : 9 August 2017
                Categories
                Article
                Custom metadata
                © The Author(s) 2017

                Uncategorized
                Uncategorized

                Comments

                Comment on this article