5
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Reactive imidazole intermediates: simplified synthetic approach to functional aliphatic cyclic carbonates

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Reactive imidazole intermediates based on AB 2 and A 3 monomers, i.e. bis(methylol) propionic acid (bis-MPA) and trimethylolpropane (TMP) have successfully been synthesized and isolated on a 100 gram scale via a facile synthetic protocol using 1,1′-carbonyldiimidazole (CDI) as a key reagent.

          Abstract

          Reactive imidazole intermediates based on AB 2 and A 3 monomers, i.e. bis(methylol) propionic acid (bis-MPA) and trimethylolpropane (TMP) have successfully been synthesized and isolated on a 100 gram scale via a facile synthetic protocol using 1,1′-carbonyldiimidazole (CDI) as a key reagent. The robustness of the imidazole intermediates as bench stable precursors enabled the synthesis of a library of functional cyclic carbonates bearing relevant functionalities including hydrophilic PEGs, bioactive cholesterol and clickable groups. A number of functional polycarbonates were obtained by ring-opening polymerization, and their relevance in biomedical applications was highlighted by their low cytotoxicity on human dermal fibroblasts (hDF).

          Related collections

          Most cited references35

          • Record: found
          • Abstract: not found
          • Article: not found

          Organocatalytic ring-opening polymerization.

            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            ‘Click’ Chemistry in Polymer and Materials Science

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Multi-colour organic light-emitting displays by solution processing.

              Organic light-emitting diodes (OLEDs) show promise for applications as high-quality self-emissive displays for portable devices such as cellular phones and personal organizers. Although monochrome operation is sufficient for some applications, the extension to multi-colour devices--such as RGB (red, green, blue) matrix displays--could greatly enhance their technological impact. Multi-colour OLEDs have been successfully fabricated by vacuum deposition of small electroluminescent molecules, but solution processing of larger molecules (electroluminescent polymers) would result in a cheaper and simpler manufacturing process. However, it has proved difficult to combine the solution processing approach with the high-resolution patterning techniques required to produce a pixelated display. Recent attempts have focused on the modification of standard printing techniques, such as screen printing and ink jetting, but those still have technical drawbacks. Here we report a class of electroluminescent polymers that can be patterned in a way similar to standard photoresist materials--soluble polymers with oxetane sidegroups that can be crosslinked photochemically to produce insoluble polymer networks in desired areas. The resolution of the process is sufficient to fabricate pixelated matrix displays. Consecutive deposition of polymers that are luminescent in each of the three RGB colours yielded a device with efficiencies comparable to state-of-the-art OLEDs and even slightly reduced onset voltages.
                Bookmark

                Author and article information

                Journal
                PCOHC2
                Polym. Chem.
                Polym. Chem.
                Royal Society of Chemistry (RSC)
                1759-9954
                1759-9962
                2014
                2014
                : 5
                : 23
                : 6651-6655
                Affiliations
                [1 ]KTH Royal Institute of Technology
                [2 ]Department of Fibre and Polymer Technology
                [3 ]SE-100 44 Stockholm, Sweden
                Article
                10.1039/C4PY00911H
                e2fd1d1f-e7cd-4a9d-a4ff-3bbf23184460
                © 2014
                History

                Comments

                Comment on this article