12
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: not found
      • Article: not found

      Rapid production of large-area, transparent and stretchable electrodes using metal nanofibers as wirelessly operated wearable heaters

      , , , , , ,
      NPG Asia Materials
      Springer Nature

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Related collections

          Most cited references29

          • Record: found
          • Abstract: found
          • Article: found
          Is Open Access

          30 inch Roll-Based Production of High-Quality Graphene Films for Flexible Transparent Electrodes

          We report that 30-inch scale multiple roll-to-roll transfer and wet chemical doping considerably enhance the electrical properties of the graphene films grown on roll-type Cu substrates by chemical vapor deposition. The resulting graphene films shows a sheet resistance as low as ~30 Ohm/sq at ~90 % transparency which is superior to commercial transparent electrodes such as indium tin oxides (ITO). The monolayer of graphene shows sheet resistances as low as ~125 Ohm/sq with 97.4% optical transmittance and half-integer quantum Hall effect, indicating the high-quality of these graphene films. As a practical application, we also fabricated a touch screen panel device based on the graphene transparent electrodes, showing extraordinary mechanical and electrical performances.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            A transparent electrode based on a metal nanotrough network.

            Transparent conducting electrodes are essential components for numerous flexible optoelectronic devices, including touch screens and interactive electronics. Thin films of indium tin oxide-the prototypical transparent electrode material-demonstrate excellent electronic performances, but film brittleness, low infrared transmittance and low abundance limit suitability for certain industrial applications. Alternatives to indium tin oxide have recently been reported and include conducting polymers, carbon nanotubes and graphene. However, although flexibility is greatly improved, the optoelectronic performance of these carbon-based materials is limited by low conductivity. Other examples include metal nanowire-based electrodes, which can achieve sheet resistances of less than 10Ω □(-1) at 90% transmission because of the high conductivity of the metals. To achieve these performances, however, metal nanowires must be defect-free, have conductivities close to their values in bulk, be as long as possible to minimize the number of wire-to-wire junctions, and exhibit small junction resistance. Here, we present a facile fabrication process that allows us to satisfy all these requirements and fabricate a new kind of transparent conducting electrode that exhibits both superior optoelectronic performances (sheet resistance of ~2Ω □(-1) at 90% transmission) and remarkable mechanical flexibility under both stretching and bending stresses. The electrode is composed of a free-standing metallic nanotrough network and is produced with a process involving electrospinning and metal deposition. We demonstrate the practical suitability of our transparent conducting electrode by fabricating a flexible touch-screen device and a transparent conducting tape.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Very long Ag nanowire synthesis and its application in a highly transparent, conductive and flexible metal electrode touch panel.

              The future electronics will be soft, flexible and even stretchable to be more human friendly in the form of wearable computers. However, conventional electronic materials are usually brittle. Recently, carbon based materials are intensively investigated as a good candidate for flexible electronics but with limited mechanical and electrical performances. Metal is still the best material for electronics with great electrical properties but with poor transparency and mechanical performance. Here we present a simple approach to develop a synthesis method for very long metallic nanowires and apply them as new types of high performance flexible and transparent metal conductors as an alternative to carbon nanotubes, graphene and short nanowire based flexible transparent conductors and indium tin oxide based brittle transparent conductors. We found that very long metallic nanowire network conductors combined with a low temperature laser nano-welding process enabled superior transparent flexible conductors with high transmittance and high electrical conductivity. Further, we demonstrated highly flexible metal conductor LED circuits and transparent touch panels. The highly flexible and transparent metal conductors can be mounted on any non-planar surfaces and applied for various opto-electronics and ultimately for future wearable electronics.
                Bookmark

                Author and article information

                Journal
                NPG Asia Materials
                NPG Asia Mater
                Springer Nature
                1884-4057
                September 8 2017
                September 8 2017
                : 9
                : 9
                : e432
                Article
                10.1038/am.2017.172
                ea3149be-eeca-448f-a4ec-f47b216b7501
                © 2017
                History

                Comments

                Comment on this article