A multimethod approach for county-scale geospatial analysis of emerging infectious diseases: a cross-sectional case study of COVID-19 incidence in Germany

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

Background

As of 13 July 2020, 12.9 million COVID-19 cases have been reported worldwide. Prior studies have demonstrated that local socioeconomic and built environment characteristics may significantly contribute to viral transmission and incidence rates, thereby accounting for some of the spatial variation observed. Due to uncertainties, non-linearities, and multiple interaction effects observed in the associations between COVID-19 incidence and socioeconomic, infrastructural, and built environment characteristics, we present a structured multimethod approach for analysing cross-sectional incidence data within in an Exploratory Spatial Data Analysis (ESDA) framework at the NUTS3 (county) scale.

Methods

By sequentially conducting a geospatial analysis, an heuristic geographical interpretation, a Bayesian machine learning analysis, and parameterising a Generalised Additive Model (GAM), we assessed associations between incidence rates and 368 independent variables describing geographical patterns, socioeconomic risk factors, infrastructure, and features of the build environment. A spatial trend analysis and Local Indicators of Spatial Autocorrelation were used to characterise the geography of age-adjusted COVID-19 incidence rates across Germany, followed by iterative modelling using Bayesian Additive Regression Trees (BART) to identify and measure candidate explanatory variables. Partial dependence plots were derived to quantify and contextualise BART model results, followed by the parameterisation of a GAM to assess correlations.

Results

A strong south-to-north gradient of COVID-19 incidence was identified, facilitating an empirical classification of the study area into two epidemic subregions. All preliminary and final models indicated that location, densities of the built environment, and socioeconomic variables were important predictors of incidence rates in Germany. The top ten predictor variables’ partial dependence exhibited multiple non-linearities in the relationships between key predictor variables and COVID-19 incidence rates. The BART, partial dependence, and GAM results indicate that the strongest predictors of COVID-19 incidence at the county scale were related to community interconnectedness, geographical location, transportation infrastructure, and labour market structure.

Conclusions

The multimethod ESDA approach provided unique insights into spatial and aspatial non-stationarities of COVID-19 incidence in Germany. BART and GAM modelling indicated that geographical configuration, built environment densities, socioeconomic characteristics, and infrastructure all exhibit associations with COVID-19 incidence in Germany when assessed at the county scale. The results suggest that measures to implement social distancing and reduce unnecessary travel may be important methods for reducing contagion, and the authors call for further research to investigate the observed associations to inform prevention and control policy.

Related collections

Most cited references 42

Record: found
Abstract: found
Article: not found

Early Transmission Dynamics in Wuhan, China, of Novel Coronavirus–Infected Pneumonia

Qun Li, Xuhua Guan, Peng Wu … (2020)

Abstract Background The initial cases of novel coronavirus (2019-nCoV)–infected pneumonia (NCIP) occurred in Wuhan, Hubei Province, China, in December 2019 and January 2020. We analyzed data on the first 425 confirmed cases in Wuhan to determine the epidemiologic characteristics of NCIP. Methods We collected information on demographic characteristics, exposure history, and illness timelines of laboratory-confirmed cases of NCIP that had been reported by January 22, 2020. We described characteristics of the cases and estimated the key epidemiologic time-delay distributions. In the early period of exponential growth, we estimated the epidemic doubling time and the basic reproductive number. Results Among the first 425 patients with confirmed NCIP, the median age was 59 years and 56% were male. The majority of cases (55%) with onset before January 1, 2020, were linked to the Huanan Seafood Wholesale Market, as compared with 8.6% of the subsequent cases. The mean incubation period was 5.2 days (95% confidence interval [CI], 4.1 to 7.0), with the 95th percentile of the distribution at 12.5 days. In its early stages, the epidemic doubled in size every 7.4 days. With a mean serial interval of 7.5 days (95% CI, 5.3 to 19), the basic reproductive number was estimated to be 2.2 (95% CI, 1.4 to 3.9). Conclusions On the basis of this information, there is evidence that human-to-human transmission has occurred among close contacts since the middle of December 2019. Considerable efforts to reduce transmission will be required to control outbreaks if similar dynamics apply elsewhere. Measures to prevent or reduce transmission should be implemented in populations at risk. (Funded by the Ministry of Science and Technology of China and others.)

0 comments Cited 7053 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

An interactive web-based dashboard to track COVID-19 in real time

Ensheng Dong, Hongru Du, Lauren Gardner (2020)

In December, 2019, a local outbreak of pneumonia of initially unknown cause was detected in Wuhan (Hubei, China), and was quickly determined to be caused by a novel coronavirus, 1 namely severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The outbreak has since spread to every province of mainland China as well as 27 other countries and regions, with more than 70 000 confirmed cases as of Feb 17, 2020. 2 In response to this ongoing public health emergency, we developed an online interactive dashboard, hosted by the Center for Systems Science and Engineering (CSSE) at Johns Hopkins University, Baltimore, MD, USA, to visualise and track reported cases of coronavirus disease 2019 (COVID-19) in real time. The dashboard, first shared publicly on Jan 22, illustrates the location and number of confirmed COVID-19 cases, deaths, and recoveries for all affected countries. It was developed to provide researchers, public health authorities, and the general public with a user-friendly tool to track the outbreak as it unfolds. All data collected and displayed are made freely available, initially through Google Sheets and now through a GitHub repository, along with the feature layers of the dashboard, which are now included in the Esri Living Atlas. The dashboard reports cases at the province level in China; at the city level in the USA, Australia, and Canada; and at the country level otherwise. During Jan 22–31, all data collection and processing were done manually, and updates were typically done twice a day, morning and night (US Eastern Time). As the outbreak evolved, the manual reporting process became unsustainable; therefore, on Feb 1, we adopted a semi-automated living data stream strategy. Our primary data source is DXY, an online platform run by members of the Chinese medical community, which aggregates local media and government reports to provide cumulative totals of COVID-19 cases in near real time at the province level in China and at the country level otherwise. Every 15 min, the cumulative case counts are updated from DXY for all provinces in China and for other affected countries and regions. For countries and regions outside mainland China (including Hong Kong, Macau, and Taiwan), we found DXY cumulative case counts to frequently lag behind other sources; we therefore manually update these case numbers throughout the day when new cases are identified. To identify new cases, we monitor various Twitter feeds, online news services, and direct communication sent through the dashboard. Before manually updating the dashboard, we confirm the case numbers with regional and local health departments, including the respective centres for disease control and prevention (CDC) of China, Taiwan, and Europe, the Hong Kong Department of Health, the Macau Government, and WHO, as well as city-level and state-level health authorities. For city-level case reports in the USA, Australia, and Canada, which we began reporting on Feb 1, we rely on the US CDC, the government of Canada, the Australian Government Department of Health, and various state or territory health authorities. All manual updates (for countries and regions outside mainland China) are coordinated by a team at Johns Hopkins University. The case data reported on the dashboard aligns with the daily Chinese CDC 3 and WHO situation reports 2 for within and outside of mainland China, respectively (figure ). Furthermore, the dashboard is particularly effective at capturing the timing of the first reported case of COVID-19 in new countries or regions (appendix). With the exception of Australia, Hong Kong, and Italy, the CSSE at Johns Hopkins University has reported newly infected countries ahead of WHO, with Hong Kong and Italy reported within hours of the corresponding WHO situation report. Figure Comparison of COVID-19 case reporting from different sources Daily cumulative case numbers (starting Jan 22, 2020) reported by the Johns Hopkins University Center for Systems Science and Engineering (CSSE), WHO situation reports, and the Chinese Center for Disease Control and Prevention (Chinese CDC) for within (A) and outside (B) mainland China. Given the popularity and impact of the dashboard to date, we plan to continue hosting and managing the tool throughout the entirety of the COVID-19 outbreak and to build out its capabilities to establish a standing tool to monitor and report on future outbreaks. We believe our efforts are crucial to help inform modelling efforts and control measures during the earliest stages of the outbreak.

0 comments Cited 4603 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1

Neeltje van Doremalen, Trenton Bushmaker, Dylan H Morris … (2021)

To the Editor: A novel human coronavirus that is now named severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) (formerly called HCoV-19) emerged in Wuhan, China, in late 2019 and is now causing a pandemic. 1 We analyzed the aerosol and surface stability of SARS-CoV-2 and compared it with SARS-CoV-1, the most closely related human coronavirus. 2 We evaluated the stability of SARS-CoV-2 and SARS-CoV-1 in aerosols and on various surfaces and estimated their decay rates using a Bayesian regression model (see the Methods section in the Supplementary Appendix, available with the full text of this letter at NEJM.org). SARS-CoV-2 nCoV-WA1-2020 (MN985325.1) and SARS-CoV-1 Tor2 (AY274119.3) were the strains used. Aerosols (<5 μm) containing SARS-CoV-2 (105.25 50% tissue-culture infectious dose [TCID50] per milliliter) or SARS-CoV-1 (106.75-7.00 TCID50 per milliliter) were generated with the use of a three-jet Collison nebulizer and fed into a Goldberg drum to create an aerosolized environment. The inoculum resulted in cycle-threshold values between 20 and 22, similar to those observed in samples obtained from the upper and lower respiratory tract in humans. Our data consisted of 10 experimental conditions involving two viruses (SARS-CoV-2 and SARS-CoV-1) in five environmental conditions (aerosols, plastic, stainless steel, copper, and cardboard). All experimental measurements are reported as means across three replicates. SARS-CoV-2 remained viable in aerosols throughout the duration of our experiment (3 hours), with a reduction in infectious titer from 103.5 to 102.7 TCID50 per liter of air. This reduction was similar to that observed with SARS-CoV-1, from 104.3 to 103.5 TCID50 per milliliter (Figure 1A). SARS-CoV-2 was more stable on plastic and stainless steel than on copper and cardboard, and viable virus was detected up to 72 hours after application to these surfaces (Figure 1A), although the virus titer was greatly reduced (from 103.7 to 100.6 TCID50 per milliliter of medium after 72 hours on plastic and from 103.7 to 100.6 TCID50 per milliliter after 48 hours on stainless steel). The stability kinetics of SARS-CoV-1 were similar (from 103.4 to 100.7 TCID50 per milliliter after 72 hours on plastic and from 103.6 to 100.6 TCID50 per milliliter after 48 hours on stainless steel). On copper, no viable SARS-CoV-2 was measured after 4 hours and no viable SARS-CoV-1 was measured after 8 hours. On cardboard, no viable SARS-CoV-2 was measured after 24 hours and no viable SARS-CoV-1 was measured after 8 hours (Figure 1A). Both viruses had an exponential decay in virus titer across all experimental conditions, as indicated by a linear decrease in the log10TCID50 per liter of air or milliliter of medium over time (Figure 1B). The half-lives of SARS-CoV-2 and SARS-CoV-1 were similar in aerosols, with median estimates of approximately 1.1 to 1.2 hours and 95% credible intervals of 0.64 to 2.64 for SARS-CoV-2 and 0.78 to 2.43 for SARS-CoV-1 (Figure 1C, and Table S1 in the Supplementary Appendix). The half-lives of the two viruses were also similar on copper. On cardboard, the half-life of SARS-CoV-2 was longer than that of SARS-CoV-1. The longest viability of both viruses was on stainless steel and plastic; the estimated median half-life of SARS-CoV-2 was approximately 5.6 hours on stainless steel and 6.8 hours on plastic (Figure 1C). Estimated differences in the half-lives of the two viruses were small except for those on cardboard (Figure 1C). Individual replicate data were noticeably “noisier” (i.e., there was more variation in the experiment, resulting in a larger standard error) for cardboard than for other surfaces (Fig. S1 through S5), so we advise caution in interpreting this result. We found that the stability of SARS-CoV-2 was similar to that of SARS-CoV-1 under the experimental circumstances tested. This indicates that differences in the epidemiologic characteristics of these viruses probably arise from other factors, including high viral loads in the upper respiratory tract and the potential for persons infected with SARS-CoV-2 to shed and transmit the virus while asymptomatic. 3,4 Our results indicate that aerosol and fomite transmission of SARS-CoV-2 is plausible, since the virus can remain viable and infectious in aerosols for hours and on surfaces up to days (depending on the inoculum shed). These findings echo those with SARS-CoV-1, in which these forms of transmission were associated with nosocomial spread and super-spreading events, 5 and they provide information for pandemic mitigation efforts.

0 comments Cited 4075 times – based on 0 reviews      Review now

Bookmark

All references

Author and article information

Contributors

Blake Byron Walker:

ORCID: http://orcid.org/0000-0002-1983-3147

blake.walker@fau.de

Journal

Journal ID (nlm-ta): Int J Health Geogr

Journal ID (iso-abbrev): Int J Health Geogr

Title: International Journal of Health Geographics

Publisher: BioMed Central (London )

ISSN (Electronic): 1476-072X

Publication date (Electronic): 13 August 2020

Publication date PMC-release: 13 August 2020

Publication date Collection: 2020

Volume: 19

Electronic Location Identifier: 32

Affiliations

[1 ]GRID grid.68312.3e, ISNI 0000 0004 1936 9422, Urban Forest Research and Ecological Disturbance (UFRED) Lab: Department of Geography, , Ryerson University, ; 350 Victoria Street, Toronto, M5B 2K3 Canada

[2 ]GRID grid.5330.5, ISNI 0000 0001 2107 3311, Community Health Environments and Social Terrains (CHEST) Lab, Institut für Geographie, , Friedrich-Alexander-Universität Erlangen-Nürnberg, ; Wetterkreuz 15, 91052 Erlangen, Germany

Author information

Blake Byron Walker http://orcid.org/0000-0002-1983-3147

Article

Publisher ID: 225

DOI: 10.1186/s12942-020-00225-1

PMC ID: 7424139

PubMed ID: 32013994

SO-VID: ef8d035f-0bd9-4e1e-94e6-ec7833a85977

License:

Open AccessThis article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver ( http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

History

Date received : 20 May 2020

Date accepted : 5 August 2020

Custom metadata

ScienceOpen disciplines: Public health

Keywords: covid-19,sars-cov-2,gis,built environment,socioeconomic status,machine learning,infectious disease,exploratory spatial data analysis (esda)

Data availability:

ScienceOpen disciplines: Public health

Keywords: covid-19, sars-cov-2, gis, built environment, socioeconomic status, machine learning, infectious disease, exploratory spatial data analysis (esda)

A multimethod approach for county-scale geospatial analysis of emerging infectious diseases: a cross-sectional case study of COVID-19 incidence in Germany

Read this article at

Abstract

Background

Methods

Results

Conclusions

Related collections

Novel Coronavirus Disease COVID-19

Most cited references 42

Early Transmission Dynamics in Wuhan, China, of Novel Coronavirus–Infected Pneumonia

An interactive web-based dashboard to track COVID-19 in real time

Aerosol and Surface Stability of SARS-CoV-2 as Compared with SARS-CoV-1

Author and article information

Contributors

Journal

Affiliations

Author information

Article

History

Categories

Custom metadata

Comments

Comment on this article

Similar content 134

Cited by 34

Most referenced authors 1,445