27
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Self-adaptive Bioinspired Hummingbird-wing Stimulated Triboelectric Nanogenerators

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Bio-inspired technologies have remarkable potential for energy harvesting from clean and sustainable energy sources. Inspired by the hummingbird-wing structure, we propose a shape-adaptive, lightweight triboelectric nanogenerator (TENG) designed to exploit the unique flutter mechanics of the hummingbird for small-scale wind energy harvesting. The flutter is confined between two surfaces for contact electrification upon oscillation. We investigate the flutter mechanics on multiple contact surfaces with several free-standing and lightweight electrification designs. The flutter driven-TENGs are deposited on simplified wing designs to match the electrical performance with variations in wind speed. The hummingbird TENG (H-TENG) device weighed 10 g, making it one of the lightest TENG harvesters in the literature. With a six TENG network, the hybrid design attained a 1.5 W m −2 peak electrical output at 7.5 m/s wind speed with an approximately linear increase in charge rate with the increased number of TENG harvesters. We demonstrate the ability of the H-TENG networks to operate Internet of Things (IoT) devices from sustainable and renewable energy sources.

          Related collections

          Most cited references41

          • Record: found
          • Abstract: not found
          • Article: not found

          Role of renewable energy sources in environmental protection: A review

            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Renewable energy and sustainable development: a crucial review

              Bookmark
              • Record: found
              • Abstract: found
              • Article: found
              Is Open Access

              Recent Progress on Piezoelectric and Triboelectric Energy Harvesters in Biomedical Systems

              Implantable medical devices (IMDs) have become indispensable medical tools for improving the quality of life and prolonging the patient's lifespan. The minimization and extension of lifetime are main challenges for the development of IMDs. Current innovative research on this topic is focused on internal charging using the energy generated by the physiological environment or natural body activity. To harvest biomechanical energy efficiently, piezoelectric and triboelectric energy harvesters with sophisticated structural and material design have been developed. Energy from body movement, muscle contraction/relaxation, cardiac/lung motions, and blood circulation is captured and used for powering medical devices. Other recent progress in this field includes using PENGs and TENGs for our cognition of the biological processes by biological pressure/strain sensing, or direct intervention of them for some special self‐powered treatments. Future opportunities lie in the fabrication of intelligent, flexible, stretchable, and/or fully biodegradable self‐powered medical systems for monitoring biological signals and treatment of various diseases in vitro and in vivo.
                Bookmark

                Author and article information

                Contributors
                ahmedry@mie.utoronto.ca
                Journal
                Sci Rep
                Sci Rep
                Scientific Reports
                Nature Publishing Group UK (London )
                2045-2322
                7 December 2017
                7 December 2017
                2017
                : 7
                : 17143
                Affiliations
                [1 ]ISNI 0000 0001 2157 2938, GRID grid.17063.33, NanoGenerators and NanoEngineering Laboratory, , School of Mechanical & Industrial Engineering, University of Toronto, ; Toronto, ON M5S 3G8 Canada
                [2 ]ISNI 0000 0004 0621 1570, GRID grid.7269.a, Design and Production Engineering Department, Faculty of Engineering, , Ain Shams University, ; Cairo, 11535 Egypt
                [3 ]ISNI 0000 0001 2224 0361, GRID grid.59025.3b, School of Electrical and Electronic Engineering, , Nanyang Technological University, ; Singapore, 639798 Singapore
                [4 ]ISNI 0000 0004 1936 9422, GRID grid.68312.3e, Electrical & Computer Engineering, Faculty of Engineering and Architectural Science, , Ryerson University, ; Toronto, Canada
                [5 ]ISNI 0000 0001 2157 2938, GRID grid.17063.33, School of Mechanical & Industrial Engineering, , University of Toronto, ; Toronto, ON M5S 3G8 Canada
                [6 ]ISNI 0000 0000 8644 1405, GRID grid.46078.3d, Department of Chemistry, , University of Waterloo, ; Waterloo, ON N2L3G1 Canada
                [7 ]GRID grid.443320.2, Department of Chemistry, Faculty of Science, , University of Hail, ; Hail, Saudi Arabia
                [8 ]ISNI 0000 0001 2180 0654, GRID grid.217309.e, Schaefer School of Engineering & Science, , Stevens Institute of Technology, ; Hoboken, NJ 07030 USA
                Author information
                http://orcid.org/0000-0002-1819-0055
                http://orcid.org/0000-0003-2714-6408
                Article
                17453
                10.1038/s41598-017-17453-4
                5719441
                29215064
                f47011c2-d873-4749-9aa3-360681169779
                © The Author(s) 2017

                Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

                History
                : 12 July 2017
                : 24 November 2017
                Categories
                Article
                Custom metadata
                © The Author(s) 2017

                Uncategorized
                Uncategorized

                Comments

                Comment on this article