Removal of PCBs from wastewater using fly ash.

Abstract

Liquids and sludges containing polychlorinated biphenyls (PCBs) can be treated to concentrate the PCBs in a solid residue. The latter can then be handled to destroy the PCBs. A study on sorption kinetics of PCBs on fly ash was conducted in controlled batch systems. TCB and HeCB are removed at 25 degrees C by adsorption on fly ash up to 97% at pH 7, with an adsorbent dose of 5 g/l. An examination of the thermodynamic parameters shows that the adsorption of TCB and HeCB by fly ash is a process occurring spontaneously at ambient conditions. Activation energies for the sorption process ranged between 5.6 and 49.1 kJ/mol. It was observed that the rate at which TCB and HeCB are adsorbed onto fly ash showed a diffusion limitation. The uptake rate of TCB and HeCB increases with increasing initial concentration and gradually tends to a constant value. A decrease in the adsorption of TCB and HeCB was observed when interfering ions and other PCB congeners were present. Changing the pH in the aqueous solution from 2 to 10 had no effect on the adsorption process. Overall, fly ash can be used for an efficient removal of PCBs from several aqueous solutions.