Blog
About

  • Record: found
  • Abstract: found
  • Article: found

Effect of the sintering temperature on the coating of duplex stainless steel with Ni3Al Translated title: Auswirkung der Sintertemperatur auf die Beschichtung von Duplexstahl mit Ni 3Al

Read this article at

ScienceOpenPublisher
Bookmark
      There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

      Abstract

      In this study, duplex stainless steel was coated with Ni3Al powder via self-propagating high-temperature synthesis (SHS) and the effect of the sintering temperature on the coating characteristics was investigated. An SEM electron microscope with EDX (energy dispersive X-ray spectroscopy) was used to examine the microstructure of samples that were coated according to the SHS method and likewise to detect the element content of the phases in the structure. Microhardness tests were conducted on the samples to determine the mechanical properties of the coated material. As a result of these studies, it was found that duplex stainless steel can be reliably coated with an Ni3Al intermetallic compound. The increase in sintering temperature within the given range significantly decreased the size of the disconnected area which completely disappeared.

      Kurzfassung

      In der diesem Beitrag zugrunde liegenden Studie wurde Duplexstahl mit Ni3Al-Pulver mittels Hochtemperatursynthese (self-propagating high-temperature synthesis (SHS)) beschichtet und die Auswirkungen der Temperatur und Zeitdauer während der Herstellung untersucht. Hierzu wurden Rasterelektronenmikroskopien mittels EDX durchgeführt, um die Mikrostruktur der beschichteten Proben zu untersuchen und die Elementverteilung in den Phasen zu detektieren. Es wurden Messungen der Mikrohärte durchgeführt, um die mechanischen Eigenschaften der Beschichtungen zu prüfen. Als ein Ergebnis stellte sich heraus, dass Duplexstahl zuverlässig mit der intermetallischen Phase Ni3Al beschichtet werden kann. Mit zunehmender Sintertemperatur wurde die nicht verbundene Fläche auf Null reduziert.

      Related collections

      Most cited references 22

      • Record: found
      • Abstract: not found
      • Article: not found

      Mechanical alloying and milling

        Bookmark
        • Record: found
        • Abstract: not found
        • Article: not found

        Effect of intermetallic precipitations on the properties of duplex stainless steel

          Bookmark
          • Record: found
          • Abstract: not found
          • Article: not found

          Duplex — A new generation of stainless steels for desalination plants

            Bookmark

            Author and article information

            Affiliations
            1 Diyarbakır
            2 Elazığ
            3 Karabük, Turkey
            Author notes
            [* ] Correspondence Address, Assoc. Prof. Vedat Veli Çay, Civil Aviation Higher School, Dicle University, 21280, Diyarbakır, Turkey, E-mail: vedatcay@ 123456yahoo.com

            Associate Professor Vedat Veli Çay, born in 1977, received his MSc in 2003 and his PhD in 2009, respectively, at the Institute of Science and Technology in the Metal Education Department of te University of Firat in Elazığ, Turkey. Since 2009, he has been working at Dicle University, Diyarbakır, Turkey. His fields of interests include fusion welding method, solid state welding method, materials science, composite materials, powder metallurgy, manufacturing techniques, surface modification and tribology.

            Assistant Professor Nida Katı, born in 1988, received his BSc in the Faculty of Technical Education and the Metal Education Department of the University of Firat n Elaziğ, Turkey, in 2009. In 2014, she received her PhD also at the University of Firat, in the Institute of Science and Technology and the Metallurgy Department,. Her research areas include fusion welding, solid state welding, materials science, composite materials, powder metallurgy, manufacturing techniques and surface modification.

            Associate Professor SerminOzan, born in 1970, received her BSc in the Faculty of Engineering and the Mechanical Engineering Department in of the University of Firat, Elaziğ, Turkey, in 1994. In 2000, she received her PhD at the same university. Her research areas include fusion materials science, composite materials, powder metallurgy, manufacturing techniques welding, solid state welding, and surface modification.

            Research Assistant Tayfun Çetin, born in 1988, received his BSc in the Faculty of Technical Education and the Metal Education Department of the University of Firat in Elaziğ, Turkey, in 2010. He completed his master's degree also atr Firat University, Metallurgy in Education Department in 2014. After completing the same year at Karabük University Faculty of Engineering Metallurgical and Materials Engineering from the Department of Licensing Program and graduated in 2016. He is continuing his doctoral training in the Manufactiring Engineering Department at the same universty.

            Journal
            mp
            Materials Testing
            Carl Hanser Verlag
            0025-5300
            2195-8572
            30 May 2018
            : 60
            : 6
            : 633-638
            MP111185
            10.3139/120.111185
            © 2018, Carl Hanser Verlag, München
            Counts
            References: 30, Pages: 6
            Product
            Self URI (journal page): https://www.hanser-elibrary.com/loi/mp
            Categories
            Fachbeiträge/Technical Contributions

            Materials technology, Materials characterization, Materials science

            Comments

            Comment on this article