Metal Nanowire Networks: The Next Generation of Transparent Conductors

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

There is an ongoing drive to replace the most common transparent conductor, indium tin oxide (ITO), with a material that gives comparable performance, but can be coated from solution at speeds orders of magnitude faster than the sputtering processes used to deposit ITO. Metal nanowires are currently the only alternative to ITO that meets these requirements. This Progress Report summarizes recent advances toward understanding the relationship between the structure of metal nanowires, the electrical and optical properties of metal nanowires, and the properties of a network of metal nanowires. Using the structure-property relationship of metal nanowire networks as a roadmap, this Progress Report describes different synthetic strategies to produce metal nanowires with the desired properties. Practical aspects of processing metal nanowires into high-performance transparent conducting films are discussed, as well as the use of nanowire films in a variety of applications.

Related collections

Most cited references 115

Record: found
Abstract: found
Article: not found

Roll-to-roll production of 30-inch graphene films for transparent electrodes.

Sukang Bae, Hyeongkeun Kim, Youngbin Lee … (2010)

The outstanding electrical, mechanical and chemical properties of graphene make it attractive for applications in flexible electronics. However, efforts to make transparent conducting films from graphene have been hampered by the lack of efficient methods for the synthesis, transfer and doping of graphene at the scale and quality required for applications. Here, we report the roll-to-roll production and wet-chemical doping of predominantly monolayer 30-inch graphene films grown by chemical vapour deposition onto flexible copper substrates. The films have sheet resistances as low as approximately 125 ohms square(-1) with 97.4% optical transmittance, and exhibit the half-integer quantum Hall effect, indicating their high quality. We further use layer-by-layer stacking to fabricate a doped four-layer film and measure its sheet resistance at values as low as approximately 30 ohms square(-1) at approximately 90% transparency, which is superior to commercial transparent electrodes such as indium tin oxides. Graphene electrodes were incorporated into a fully functional touch-screen panel device capable of withstanding high strain.

0 comments Cited 991 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Transparent, conductive carbon nanotube films.

Zhuangchun Wu, Zhihong Chen, Xu Du … (2004)

We describe a simple process for the fabrication of ultrathin, transparent, optically homogeneous, electrically conducting films of pure single-walled carbon nanotubes and the transfer of those films to various substrates. For equivalent sheet resistance, the films exhibit optical transmittance comparable to that of commercial indium tin oxide in the visible spectrum, but far superior transmittance in the technologically relevant 2- to 5-micrometer infrared spectral band. These characteristics indicate broad applicability of the films for electrical coupling in photonic devices. In an example application, the films are used to construct an electric field-activated optical modulator, which constitutes an optical analog to the nanotube-based field effect transistor.

0 comments Cited 554 times – based on 0 reviews      Review now

Bookmark

Record: found
Abstract: found
Article: not found

Emerging transparent electrodes based on thin films of carbon nanotubes, graphene, and metallic nanostructures.

David S. Hecht, Liangbing Hu, Glen Irvin (2011)

Transparent electrodes are a necessary component in many modern devices such as touch screens, LCDs, OLEDs, and solar cells, all of which are growing in demand. Traditionally, this role has been well served by doped metal oxides, the most common of which is indium tin oxide, or ITO. Recently, advances in nano-materials research have opened the door for other transparent conductive materials, each with unique properties. These include CNTs, graphene, metal nanowires, and printable metal grids. This review will explore the materials properties of transparent conductors, covering traditional metal oxides and conductive polymers initially, but with a focus on current developments in nano-material coatings. Electronic, optical, and mechanical properties of each material will be discussed, as well as suitability for various applications. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.