2
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Novel TiO 2 Nanoparticles/Polysulfone Composite Hollow Microspheres for Photocatalytic Degradation

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Nanosized titanium oxide (TiO 2) material is a promising photocatalyst for the degradation of organic pollutants, whereas the difficulty of its recycling hinders its practical application. Herein, we reported the preparation of a novel titanium oxide/polysulfone (TiNPs/PSF) composite hollow microspheres by the combination of Pickering emulsification and the solvent evaporation technique and their application for the photodegradation of methyl blue (MB). P25 TiO 2 nanoparticles dispersed on the surface of PSF microspheres. The porosity, density and photoactivity of the TiNPs/PSF composite microsphere are influenced by the TiO 2 loading amount. The composite microsphere showed good methyl blue (MB) removal ability. Compared with TiO 2 P25, and PSF, a much higher MB adsorption speed was observed for TiNPs/PSF microspheres benefited from their porous structure and the electrostatic attractions between the MB+ and the negatively charged PSF materials, and showed good degradation efficiency. For TiNPs/PSF composite microsphere with density close to 1, a 100% MB removal (10 mg L −1) within 120 min at a catalyst loading of 2.5 g L −1 can be obtained under both stirring and static condition, due to well dispersing of TiO 2 particles on the microsphere surface and its stable suspending in water. For the non-suspended TiNPs/PSF composite microsphere with density bigger than 1, the 100% MB removal can be only obtained under stirring condition. The removal efficiency of MB for the composite microspheres retained 96.5%, even after 20 cycles. Moreover, this composite microsphere also showed high MB removal ability at acidic condition. The high catalysis efficiency, excellent reusability and good stability make this kind of TiNPs/PSF composite microsphere a promising photocatalyst for the water organic pollution treatment.

          Related collections

          Most cited references42

          • Record: found
          • Abstract: found
          • Article: found
          Is Open Access

          A Review on Reverse Osmosis and Nanofiltration Membranes for Water Purification

          Sustainable and affordable supply of clean, safe, and adequate water is one of the most challenging issues facing the world. Membrane separation technology is one of the most cost-effective and widely applied technologies for water purification. Polymeric membranes such as cellulose-based (CA) membranes and thin-film composite (TFC) membranes have dominated the industry since 1980. Although further development of polymeric membranes for better performance is laborious, the research findings and sustained progress in inorganic membrane development have grown fast and solve some remaining problems. In addition to conventional ceramic metal oxide membranes, membranes prepared by graphene oxide (GO), carbon nanotubes (CNTs), and mixed matrix materials (MMMs) have attracted enormous attention due to their desirable properties such as tunable pore structure, excellent chemical, mechanical, and thermal tolerance, good salt rejection and/or high water permeability. This review provides insight into synthesis approaches and structural properties of recent reverse osmosis (RO) and nanofiltration (NF) membranes which are used to retain dissolved species such as heavy metals, electrolytes, and inorganic salts in various aqueous solutions. A specific focus has been placed on introducing and comparing water purification performance of different classes of polymeric and ceramic membranes in related water treatment industries. Furthermore, the development challenges and research opportunities of organic and inorganic membranes are discussed and the further perspectives are analyzed.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: found
            Is Open Access

            Pollution exacerbates China’s water scarcity and its regional inequality

            Inadequate water quality can mean that water is unsuitable for a variety of human uses, thus exacerbating freshwater scarcity. Previous large-scale water scarcity assessments mostly focused on the availability of sufficient freshwater quantity for providing supplies, but neglected the quality constraints on water usability. Here we report a comprehensive nationwide water scarcity assessment in China, which explicitly includes quality requirements for human water uses. We highlight the necessity of incorporating water scarcity assessment at multiple temporal and geographic scales. Our results show that inadequate water quality exacerbates China’s water scarcity, which is unevenly distributed across the country. North China often suffers water scarcity throughout the year, whereas South China, despite sufficient quantities, experiences seasonal water scarcity due to inadequate quality. Over half of the population are affected by water scarcity, pointing to an urgent need for improving freshwater quantity and quality management to cope with water scarcity.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Recent advancements in supporting materials for immobilised photocatalytic applications in waste water treatment.

              The aim of this paper is to provide a review on the usage of different anchoring media (supports) for immobilising commonly employed photocatalysts for degradation of organic pollutants. The immobilisation of nano-sized photocatalysts can eliminate costly and impractical post-treatment recovery of spent photocatalysts in largescale operations. Some commonly employed immobilisation aids such as glass, carbonaceous substances, zeolites, clay and ceramics, polymers, cellulosic materials and metallic agents that have been previously discussed by various research groups have been reviewed. The study revealed that factors such as high durability, ease of availability, low density, chemical inertness and mechanical stability are primary factors responsible for the selection of suitable supports for catalysts. Common techniques for immobilisation namely, dip coating, cold plasma discharge, polymer assisted hydrothermal decomposition, RF magnetron sputtering, photoetching, solvent casting, electrophoretic deposition and spray pyrolysis have been discussed in detail. Finally, some common techniques adopted for the characterisation of the catalyst particles and their uses are also discussed.
                Bookmark

                Author and article information

                Journal
                Polymers (Basel)
                Polymers (Basel)
                polymers
                Polymers
                MDPI
                2073-4360
                21 January 2021
                February 2021
                : 13
                : 3
                : 336
                Affiliations
                Center for Advanced Low-Dimension Materials, State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China; 1185099@ 123456mail.dhu.edu.cn (S.Z.); 1185078@ 123456mail.dhu.edu.cn (Q.W.); 2180397@ 123456mail.dhu.edu.cn (F.D.); 1209718@ 123456mail.dhu.edu.cn (Y.G.); qgt@ 123456dhu.edu.cn (G.Q.); cch@ 123456dhu.edu.cn (C.C.)
                Author notes
                [* ]Correspondence: yuyouhai@ 123456dhu.edu.cn
                Article
                polymers-13-00336
                10.3390/polym13030336
                7865213
                33494382
                0c947234-3da9-47a0-9fde-747c615b8413
                © 2021 by the authors.

                Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license ( http://creativecommons.org/licenses/by/4.0/).

                History
                : 29 December 2020
                : 18 January 2021
                Categories
                Article

                hollow composite microspheres,polysulfone,titanium oxide nanoparticles,photocatalytic degradation materials

                Comments

                Comment on this article