4
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      Highly thermally conductive and flexible phase change composites enabled by polymer/graphite nanoplatelet-based dual networks for efficient thermal management

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Dual polymer and aligned graphite nanoplatelet networks enable highly thermally conductive, flexible, leakage-proof and form-stable phase change composites.

          Abstract

          Phase change materials (PCMs) have been widely used for passive thermal management and energy storage due to the high latent heat capacity near phase transition points. However, the low thermal conductivity and leakage issue are two long-standing bottlenecks in PCM-based heat-related applications. Although the state of the art can address one or both of these issues by synthesizing phase change composites (PCCs), it remains challenging to achieve high-performance PCCs with simultaneously superior thermal and mechanical properties and phase change behaviors. In this work, a new method is reported to prepare highly thermally conductive, flexible and leakage-proof PCCs by constructing dual polymer and graphite nanoplatelet networks as the functional matrix of PCMs. In the composites, paraffin wax serves as the PCM, the macromolecular olefin block copolymer (OBC) forms a cross-linked polymer network to enclose the molten PCM and endow the composite film with flexibility, and expanded graphite (EG) with a long-chain structure forms an aligned and interconnected graphite nanoplatelet percolation network to enable the high thermal conductivity of PCCs. The radial thermal conductivities reach 4.2–32.8 W m −1 K −1 at EG loadings of 5–40 wt%. The resultant flexible composite film shows efficient and reliable thermal management performance by lowering the working temperature of a commercial lithium-ion battery by more than 12 °C at high discharge rates. Our work provides an efficient and cost-effective route to synthesizing high-performance PCCs for various heat-related applications including the thermal harvesting of renewable energy, building energy management, thermal management of electronics, etc.

          Related collections

          Most cited references61

          • Record: found
          • Abstract: found
          • Article: not found

          Thermal properties of graphene and nanostructured carbon materials.

          Recent years have seen a rapid growth of interest by the scientific and engineering communities in the thermal properties of materials. Heat removal has become a crucial issue for continuing progress in the electronic industry, and thermal conduction in low-dimensional structures has revealed truly intriguing features. Carbon allotropes and their derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range--of over five orders of magnitude--from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. Here, I review the thermal properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder. Special attention is given to the unusual size dependence of heat conduction in two-dimensional crystals and, specifically, in graphene. I also describe the prospects of applications of graphene and carbon materials for thermal management of electronics.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Phase change materials for thermal energy storage

              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Nanoconfined phase change materials for thermal energy applications

              This review presents a summary of recent progress and strategies in fabricating nanoencapsulated PCMs for thermal energy applications. Phase change materials (PCMs) have been extensively characterized as constant temperature latent heat thermal energy storage (TES) materials. Nevertheless, the widespread utilization of PCMs is limited due to the flow of liquid PCMs during melting, phase separation, supercooling and low heat transfer rate. In order to overcome these inherent problems and to improve thermo-physical properties, the confinement of PCMs at the nanoscale has been identified as a versatile strategy, which ensures the encapsulation of PCMs in much smaller nano-containers. Such strategies including core–shell, longitudinal, interfacial and porous confinement have been widely presented in recent years to efficiently encapsulate PCMs in nanospaces and are presenting attractive ways to enhance thermal performance. This review summarizes the recent advancement and critical issues of nanoconfinement technologies of PCMs from the point of view of material design. In addition, the potential applications of nanoconfined PCMs in diverse fields, including energy conversion and storage, thermal rectification and temperature controlled drug delivery systems, are presented in detail. Finally, the major drawbacks associated with nanoconfined PCMs and their prospective solutions are also provided.
                Bookmark

                Author and article information

                Contributors
                Journal
                JMCAET
                Journal of Materials Chemistry A
                J. Mater. Chem. A
                Royal Society of Chemistry (RSC)
                2050-7488
                2050-7496
                October 6 2020
                2020
                : 8
                : 38
                : 20011-20020
                Affiliations
                [1 ]Institute of Refrigeration and Cryogenics
                [2 ]Shanghai Jiao Tong University
                [3 ]Shanghai 200240
                [4 ]China
                Article
                10.1039/D0TA05904H
                37ee662b-e18e-4d09-ac57-f7f77e368c3d
                © 2020

                http://rsc.li/journals-terms-of-use

                History

                Comments

                Comment on this article