8
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: not found

      3D mesoporous hybrid NiCo2O4@graphene nanoarchitectures as electrode materials for supercapacitors with enhanced performances

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          3D mesoporous hybrid NiCo 2O 4@graphene nanoarchitectures were successfully synthesized by a combination of freeze drying and hydrothermal reaction.

          Abstract

          3D mesoporous hybrid NiCo 2O 4@graphene nanoarchitectures were successfully synthesized by a combination of freeze drying and hydrothermal reaction. Field-emission scanning electron microscopy (FESEM) and TEM analyses revealed that the NiCo 2O 4@graphene nanostructures consist of a hierarchical mesoporous sheet-on-sheet nanoarchitecture with a high specific surface area of 194 m 2 g −1. Ultrathin NiCo 2O 4 nanosheets, with a thickness of a few nanometers and mesopores ranging from 2 to 5 nm, were wrapped in graphene nanosheets and hybrid nanoarchitectures were formed. When applied as electrode materials in supercapacitors, the hybrid NiCo 2O 4@graphene nanosheets exhibited a high capacitance of 778 F g −1 at a current density of 1 A g −1, and an excellent cycling performance extending to 10 000 cycles at a high current density of 10 A g −1.

          Related collections

          Most cited references25

          • Record: found
          • Abstract: found
          • Article: not found

          Carbon materials for chemical capacitive energy storage.

          Carbon materials have attracted intense interests as electrode materials for electrochemical capacitors, because of their high surface area, electrical conductivity, chemical stability and low cost. Activated carbons produced by different activation processes from various precursors are the most widely used electrodes. Recently, with the rapid growth of nanotechnology, nanostructured electrode materials, such as carbon nanotubes and template-synthesized porous carbons have been developed. Their unique electrical properties and well controlled pore sizes and structures facilitate fast ion and electron transportation. In order to further improve the power and energy densities of the capacitors, carbon-based composites combining electrical double layer capacitors (EDLC)-capacitance and pseudo-capacitance have been explored. They show not only enhanced capacitance, but as well good cyclability. In this review, recent progresses on carbon-based electrode materials are summarized, including activated carbons, carbon nanotubes, and template-synthesized porous carbons, in particular mesoporous carbons. Their advantages and disadvantages as electrochemical capacitors are discussed. At the end of this review, the future trends of electrochemical capacitors with high energy and power are proposed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Nanostructured carbon-metal oxide composite electrodes for supercapacitors: a review.

            This paper presents a review of the research progress in the carbon-metal oxide composites for supercapacitor electrodes. In the past decade, various carbon-metal oxide composite electrodes have been developed by integrating metal oxides into different carbon nanostructures including zero-dimensional carbon nanoparticles, one-dimensional nanostructures (carbon nanotubes and carbon nanofibers), two-dimensional nanosheets (graphene and reduced graphene oxides) as well as three-dimensional porous carbon nano-architectures. This paper has described the constituent, the structure and the properties of the carbon-metal oxide composites. An emphasis is placed on the synergistic effects of the composite on the performance of supercapacitors in terms of specific capacitance, energy density, power density, rate capability and cyclic stability. This paper has also discussed the physico-chemical processes such as charge transport, ion diffusion and redox reactions involved in supercapacitors.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Design and tailoring of the nanotubular arrayed architecture of hydrous RuO2 for next generation supercapacitors.

              By use of the membrane-templated synthesis route, hydrous RuO2 (RuO2.xH2O) nanotubular arrayed electrodes were successfully synthesized by means of the anodic deposition technique. The desired three-dimensional mesoporous architecture of RuO2.xH2O nanotubular arrayed electrodes with annealing in air at 200 degrees C for 2 h simultaneously maintained the facility of electrolyte penetration, the ease of proton exchange/diffusion, and the metallic conductivity of crystalline RuO2, exhibiting unexpectedly ultrahigh power characteristics with its frequency "knee" reaching ca. 4.0-7.8 kHz, 20-40 times better than that of RuO2 single crystalline, arrayed nanorods. The specific power and specific energy of annealed RuO2.xH2O nanotubes measured at 0.8 V and 4 kHz is equal to 4320 kW kg-1 and 7.5 W h kg-1, respectively, demonstrating the characteristics of next generation supercapacitors.
                Bookmark

                Author and article information

                Journal
                JMCAET
                J. Mater. Chem. A
                J. Mater. Chem. A
                Royal Society of Chemistry (RSC)
                2050-7488
                2050-7496
                2014
                2014
                : 2
                : 21
                : 8103-8109
                Affiliations
                [1 ]Centre for Clean Energy Technology
                [2 ]University of Technology Sydney
                [3 ]Ultimo, Australia
                [4 ]Centre for Electrical Machines and Power Electronics
                Article
                10.1039/C3TA15423H
                3fa87ad6-6508-4305-8d18-dbb9dd17b501
                © 2014
                History

                Comments

                Comment on this article