15
views
0
recommends
+1 Recommend
1 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found

      Processing of Soju Industrial Bioresidue to Extract Microcrystalline Cellulose and Characterization

      research-article

      Read this article at

      ScienceOpenPublisher
      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Soju industrial biomass residue (SIBR) is a lignocellulosic agro-industrial biowaste available in large quantities in soju producing countries. In this study, an attempt was made to extract microcrystalline cellulose (MCC), a biopolymer from SIBR by controlled acid hydrolysis. X-ray diffraction analysis indicated the presence of cellulose I structure with two peaks around 2θ = 15 and 22.5° and increase in crystallinity after acid hydrolysis treatment. Fourier transform infrared analysis showed no significant chemical affect of the cellulose fragment. Thermo-gravimetric analysis reveals that the extracted MCC have a good thermal stability (319°C). Dynamic light scattering studies confirmed the presence of MCC in micro range (126.4 nm) which was supported by transmission electron microscopy. The results of this work are useful for extracting valuable and widely applicable cellulose, and help solve management of SIBR in terms of disposal and pollution problems.

          Most cited references44

          • Record: found
          • Abstract: found
          • Article: not found

          Isolation and characterization of nanofibers from agricultural residues: wheat straw and soy hulls.

          Cellulose nanofibers were extracted from the agricultural residues, wheat straw and soy hulls, by a chemi-mechanical technique to examine their potential for use as reinforcement fibers in biocomposite applications. The structure of the cellulose nanofibers was investigated by transmission electron microscopy. The wheat straw nanofibers were determined to have diameters in the range of 10-80 nm and lengths of a few thousand nanometers. By comparison, the soy hull nanofibers had diameter 20-120 nm and shorter lengths than the wheat straw nanofibers. Chemical characterization of the wheat straw nanofibers confirmed that the cellulose content was increased from 43% to 84% by an applied alkali and acid treatment. FT-IR spectroscopic analysis of both fibers demonstrated that this chemical treatment also led to partial removal of hemicelluloses and lignin from the structure of the fibers. PXRD results revealed that this resulted in improved crystallinity of the fibers. After mechanical treatments of cryocrushing, disintegration and defibrillation, the thermal properties of the nanofibers were studied by the TGA technique and found to increase dramatically. The degradation temperature of both nanofiber types reached beyond 290 degrees C. This value is reasonably promising for the use of these nanofibers in reinforced-polymer manufacturing.
            Bookmark
            • Record: found
            • Abstract: not found
            • Article: not found

            Ionic liquids and their interaction with cellulose.

              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found
              Is Open Access

              Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications

                Bookmark

                Author and article information

                Journal
                ipp
                International Polymer Processing
                Carl Hanser Verlag
                0930-777X
                2195-8602
                30 July 2015
                : 30
                : 3
                : 337-343
                Affiliations
                1 Division of Biotechnology, Advanced Institute of Environment and Bioscience, College of Environmental and Bioresource Sciences, Chonbuk National University, Iksan, South Korea
                2 Mine Reclamation Corp., Seoul, South Korea
                3 Department of Ecology Landscape Architecture – Design, College of Environmental and Bioresource Sciences, Chonbuk National University, Iksan, South Korea
                Author notes
                [* ] Mail address: Byung-Taek Oh, Division of Biotechnology, Advanced Institute of Environment and Bioscience, College of Environmental and Bioresource Sciences, Chonbuk National University, Iksan, 570-752, South Korea, E-mail: btoh@ 123456jbnu.ac.kr
                Article
                IPP2996
                10.3139/217.2996
                64f6b734-527c-42ef-b9dd-515e2ce352cf
                © 2015, Carl Hanser Verlag, Munich
                History
                : 9 July 2014
                : 12 April 2015
                Page count
                References: 52, Pages: 7
                Categories
                Regular Contributed Articles

                Polymer science,Materials technology,Materials characterization,General engineering,Polymer chemistry

                Comments

                Comment on this article