76
views
0
recommends
+1 Recommend
0 collections
    8
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Retrograde Tibial Nailing: a minimally invasive and biomechanically superior alternative to angle-stable plate osteosynthesis in distal tibia fractures

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Background

          Currently, antegrade intramedullary nailing and minimally invasive plate osteosynthesis (MIPO) represent the main surgical alternatives in distal tibial fractures. However, neither choice is optimal for all bony and soft tissue injuries. The Retrograde Tibial Nail (RTN) is a small-caliber prototype implant, which is introduced through a 2-cm-long incision at the tip of the medial malleolus with stab incisions sufficient for interlocking. During this project, we investigated the feasibility of retrograde tibial nailing in a cadaver model and conducted biomechanical testing.

          Methods

          Anatomical implantations of the RTN were carried out in AO/OTA 43 A1-3 fracture types in three cadaveric lower limbs. Biomechanical testing was conducted in an AO/OTA 43 A3 fracture model for extra-axial compression, torsion, and destructive extra-axial compression. Sixteen composite tibiae were used to compare the RTN against an angle-stable plate osteosynthesis (Medial Distal Tibial Plate, Synthes ®). Statistical analysis was performed by Student's t test.

          Results

          Retrograde intramedullary nailing is feasible in simple fracture types by closed manual reduction and percutaneous reduction forceps, while in highly comminuted fractures, the use of a large distractor can aid the reduction. Biomechanical testing shows a statistically superior stability ( p < 0.001) of the RTN during non-destructive axial loading and torsion. Destructive extra-axial compression testing resulted in failure of all plate constructs, while all RTN specimens survived the maximal load of 1,200 N.

          Conclusions

          The prototype retrograde tibial nail meets the requirements of maximum soft tissue protection by a minimally invasive surgical approach with the ability of secure fracture fixation by multiple locking options. Retrograde tibial nailing with the RTN is a promising concept in the treatment of distal tibia fractures.

          Related collections

          Most cited references31

          • Record: found
          • Abstract: found
          • Article: not found

          Epidemiology of adult fractures: A review.

          The epidemiology of adult fractures is changing quickly. An analysis of 5953 fractures reviewed in a single orthopaedic trauma unit in 2000 showed that there are eight different fracture distribution curves into which all fractures can be placed. Only two fracture curves involve predominantly young patients; the other six show an increased incidence of fractures in older patients. It is popularly assumed that osteoporotic fractures are mainly seen in the thoracolumbar spine, proximal femur, proximal humerus and distal radius, but analysis of the data indicates that 14 different fractures should now be considered to be potentially osteoporotic. About 30% of fractures in men, 66% of fractures in women and 70% of inpatient fractures are potentially osteoporotic.
            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Fracture and dislocation classification compendium - 2007: Orthopaedic Trauma Association classification, database and outcomes committee.

            The purpose of this new classification compendium is to republish the Orthopaedic Trauma Association's (OTA) classification. The OTA classification was originally published in a compendium of the Journal of Orthopaedic Trauma in 1996. It adopted The Comprehensive Classification of the Long Bones developed by Müller and colleagues and classified the remaining bones. In this compendium, the introductory chapter reviews new scientific information about classifying fractures that has been published in the last 11 years. The classification is presented in a revised format that is easier to follow. The OTA and AO classification will now have a unified alpha-numeric code eliminating the differences that have existed between the 2 codes. The code was significantly revised for the clavicle and scapula, foot and hand, and patella. Dislocations have been expanded on an anatomic basis and for most joints will be coded separately. This publication should stimulate new developments and interest in a unified language to code and classify fractures. Further improvements in classification will result in better patient care and clinical research.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Structural properties of fourth-generation composite femurs and tibias.

              The purpose of this study was to measure the structural properties of the latest design (fourth-generation) of composite femurs and tibias from Pacific Research Laboratories, Inc. Fourth-generation composite bones have the same geometries as the third-generation bones, but the cortical bone analogue material was changed to one with increased fracture and fatigue resistance, tensile and compressive properties, thermal stability, and moisture resistance. The stiffnesses of the femurs and tibias were tested under bending, axial, and torsional loading, and the longitudinal strain distribution along the proximal-medial diaphysis of the femur was also determined. The fourth-generation composite bones had average stiffnesses and strains that were for the most part closer to corresponding values measured for natural bones, than was the case for third-generation composite bones; all measurements were taken by the same investigator in separate studies using identical methodology. For the stiffness tests, variability between the specimens was less than 10% for all cases, and setup variability was less than 6%.
                Bookmark

                Author and article information

                Contributors
                Journal
                J Orthop Surg Res
                J Orthop Surg Res
                Journal of Orthopaedic Surgery and Research
                BioMed Central
                1749-799X
                2014
                13 May 2014
                : 9
                : 35
                Affiliations
                [1 ]Department of Orthopedics and Traumatology, University Medical Centre of the Johannes Gutenberg University, Langenbeckstrasse 1, Mainz 55131, Germany
                Article
                1749-799X-9-35
                10.1186/1749-799X-9-35
                4026593
                24886667
                9de6f47d-d66f-428a-9fcf-5f4397bdec15
                Copyright © 2014 Kuhn et al.; licensee BioMed Central Ltd.

                This is an Open Access article distributed under the terms of the Creative Commons Attribution License ( http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver ( http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

                History
                : 25 February 2014
                : 28 April 2014
                Categories
                Research Article

                Surgery
                distal tibia,metaphyseal fractures,intramedullary nailing,retrograde nailing,plate osteosynthesis

                Comments

                Comment on this article