Efficient Rhodamine B Dye Removal from Water by Acid- and Organo-Modified Halloysites

There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

Abstract

The halloysite has been subjected to modification through ultrasound (HU), sulfuric acid (HU-SA), and oligocyclopentadiene resin (HU-OCPD). The modified materials were characterized by scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier-transform infrared spectroscopy (FTIR), thermogravimetry (TG), and N2 adsorption-desorption isotherms, and tested as low-cost adsorbents for removal of Rhodamine B dye (RhB) from aqueous solutions. Batch experiments were conducted to study the effect of different operational parameters such as adsorbent dose, solution pH, and contact time. It was observed that the adsorption was strongly pH-dependent and that solution pH at 2.0 had the greatest removal efficiency for the dye. The experimental data were modeled using several isotherm and kinetic models such as Freundlich, Langmuir, Temkin as well as pseudo-first-order, pseudo-second-order, and intraparticle diffusion. It was found that the equilibrium adsorption data can be fitted well using the Freundlich isotherm model and the adsorption kinetics follows a pseudo-second-order model. The adsorption capacity of HU, HU-SA, and HU-OCPD was found to be 8.37, 13.1, and 17.8 mg/g, respectively. The results revealed that surface modification of halloysite via acid activation and polymer loading results in a significant increase in the removal of RhB from aqueous solution. This study has shown potential on organo-halloysite for organic dye adsorption from water.

Related collections

Most cited references 48

Record: found
Abstract: found
Article: not found

Dye and its removal from aqueous solution by adsorption: a review.

Mustafa Yagub, Tushar Sen, Sharmeen Afroze … (2014)

In this review article the authors presented up to-date development on the application of adsorption in the removal of dyes from aqueous solution. This review article provides extensive literature information about dyes, its classification and toxicity, various treatment methods, and dye adsorption characteristics by various adsorbents. One of the objectives of this review article is to organise the scattered available information on various aspects on a wide range of potentially effective adsorbents in the removal of dyes. Therefore, an extensive list of various adsorbents such as natural materials, waste materials from industry, agricultural by-products, and biomass based activated carbon in the removal of various dyes has been compiled here. Dye bearing waste treatment by adsorption using low cost alternative adsorbent is a demanding area as it has double benefits i.e. water treatment and waste management. Further, activated carbon from biomass has the advantage of offering an effected low cost replacement for non-renewable coal based granular activated carbon provided that they have similar or better adsorption on efficiency. The effectiveness of various adsorbents under different physico-chemical process parameters and their comparative adsorption capacity towards dye adsorption has also been presented. This review paper also includes the affective adsorption factors of dye such as solution pH, initial dye concentration, adsorbent dosage, and temperature. The applicability of various adsorption kinetic models and isotherm models for dye removal by wide range of adsorbents is also reported here. Conclusions have been drawn from the literature reviewed and few suggestions for future research are proposed.