38
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Overview of Fiber Optic Sensor Technologies for Strain/Temperature Sensing Applications in Composite Materials

      review-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          This paper provides an overview of the different types of fiber optic sensors (FOS) that can be used with composite materials and also their compatibility with and suitability for embedding inside a composite material. An overview of the different types of FOS used for strain/temperature sensing in composite materials is presented. Recent trends, and future challenges for FOS technology for condition monitoring in smart composite materials are also discussed. This comprehensive review provides essential information for the smart materials industry in selecting of appropriate types of FOS in accordance with end-user requirements.

          Related collections

          Most cited references103

          • Record: found
          • Abstract: not found
          • Article: not found

          Fiber Bragg grating technology fundamentals and overview

            Bookmark
            • Record: found
            • Abstract: not found
            • Book: not found

            An Introduction to Composite Materials

            D Hull, T Clyne (1996)
              Bookmark
              • Record: found
              • Abstract: not found
              • Article: not found

              Fiber optic sensor technology: an overview

                Bookmark

                Author and article information

                Contributors
                Role: Academic Editor
                Journal
                Sensors (Basel)
                Sensors (Basel)
                sensors
                Sensors (Basel, Switzerland)
                MDPI
                1424-8220
                15 January 2016
                January 2016
                : 16
                : 1
                : 99
                Affiliations
                [1 ]Photonics Research Centre, School of Electrical and Electronic Engineering, Dublin Institute of Technology, Kevin Street, Dublin 8, Ireland; yuliya.semenova@ 123456dit.ie (Y.S.); gerald.farrell@ 123456dit.ie (G.F.)
                [2 ]School of Electrical, Computer and Telecommunications Engineering, University of Wollongong, New South Wales 2522, Australia; ginu@ 123456uow.edu.au
                Author notes
                [* ]Correspondence: manjusha.ramakrishnan@ 123456student.dit.ie ; Tel.: +353-1-402-4812; Fax: +353-1-402-4690
                Article
                sensors-16-00099
                10.3390/s16010099
                4732132
                26784192
                c2398712-e635-4b9e-8ded-e4b48d816e01
                © 2016 by the authors; licensee MDPI, Basel, Switzerland.

                This article is an open access article distributed under the terms and conditions of the Creative Commons by Attribution (CC-BY) license ( http://creativecommons.org/licenses/by/4.0/).

                History
                : 29 October 2015
                : 10 January 2016
                Categories
                Review

                Biomedical engineering
                fiber optic sensor,composite materials,strain/temperature sensing,smart materials,structural health monitoring

                Comments

                Comment on this article