0
views
0
recommends
+1 Recommend
0 collections
    0
    shares
      • Record: found
      • Abstract: found
      • Article: found
      Is Open Access

      Production of polyhydroxybutyrate by coupled saccharification–fermentation of inulin

      research-article

      Read this article at

      Bookmark
          There is no author summary for this article yet. Authors can add summaries to their articles on ScienceOpen to make them more accessible to a non-specialist audience.

          Abstract

          Inulin is a fructose-based polysaccharide that can be found in several plant species, from grass and onions to chicory roots; thus, it has the potential to be an excellent renewable source of fructose for several industrial applications. Among them, inulin hydrolysis can be coupled to a fermentation operation to produce polyhydroxybutyrate (PHB) using Cupriavidus necator H16. This work reports the PHB production process involving chicory root inulin hydrolysis using inulinase Novozym 960 followed by a C. necator fermentation. It was found that the maximum saccharification (95% wt.) was reached at 269 U/g inulin after 90 min. The hydrolysates obtained were then inoculated with C. necator, leading to a biomass concentration of 4 g/L with 30% (w/w) polymer accumulation. Although PHB production was low, during the first hours, the cell growth and polymer accumulation detected did not coincide with a fructose concentration decrease, suggesting a simultaneous saccharification and fermentation process, potentially alleviating the product inhibition inherent to the inulinase–fructose system. The characterization of the obtained PHB showed a polymer with more homogeneous values of M w, and better thermal stability than PHB produced using pure fructose as a fermentation substrate. The results obtained demonstrate a viable alternative carbon substrate for PHB production, opening the possibility for inulin-rich renewable feedstock valorization.

          Supplementary Information

          The online version contains supplementary material available at 10.1007/s00449-023-02953-7.

          Related collections

          Most cited references45

          • Record: found
          • Abstract: not found
          • Article: not found

          Crystallization and morphology of a bacterial thermoplastic: poly-3-hydroxybutyrate

            Bookmark
            • Record: found
            • Abstract: found
            • Article: not found

            Microbial production of polyhydroxyalkanoates (PHAs) and its copolymers: A review of recent advancements.

            Traditional mineral oil based plastics are important commodity to enhance the comfort and quality of life but the accumulation of these plastics in the environment has become a major universal problem due to their low biodegradation. Solution to the plastic waste management includes incineration, recycling and landfill disposal methods. These processes are very time consuming and expensive. Biopolymers are important alternatives to the petroleum-based plastics due to environment friendly manufacturing processes, biodegradability and biocompatibility. Therefore use of novel biopolymers, such as polylactide, polysaccharides, aliphatic polyesters and polyhydroxyalkanoates is of interest. PHAs are biodegradable polyesters of hydroxyalkanoates (HA) produced from renewable resources by using microorganisms as intracellular carbon and energy storage compounds. Even though PHAs are promising candidate for biodegradable polymers, however, the production cost limit their application on an industrial scale. This article provides an overview of various substrates, microorganisms for the economical production of PHAs and its copolymers. Recent advances in PHAs to reduce the cost and to improve the performance of PHAs have also been discussed.
              Bookmark
              • Record: found
              • Abstract: found
              • Article: not found

              Bacterial synthesis of biodegradable polyhydroxyalkanoates.

              Various bacterial species accumulate intracellular polyhydroxyalkanoates (PHAs) granules as energy and carbon reserves inside their cells. PHAs are biodegradable, environmentally friendly and biocompatible thermoplastics. Varying in toughness and flexibility, depending on their formulation, they can be used in various ways similar to many nonbiodegradable petrochemical plastics currently in use. They can be used either in pure form or as additives to oil-derived plastics such as polyethylene. However, these bioplastics are currently far more expensive than petrochemically based plastics and are therefore used mostly in applications that conventional plastics cannot perform, such as medical applications. PHAs are immunologically inert and are only slowly degraded in human tissue, which means they can be used as devices inside the body. Recent research has focused on the use of alternative substrates, novel extraction methods, genetically enhanced species and mixed cultures with a view to make PHAs more commercially attractive.
                Bookmark

                Author and article information

                Contributors
                carmina@unam.mx
                Journal
                Bioprocess Biosyst Eng
                Bioprocess Biosyst Eng
                Bioprocess and Biosystems Engineering
                Springer Berlin Heidelberg (Berlin/Heidelberg )
                1615-7591
                1615-7605
                25 November 2023
                25 November 2023
                2024
                : 47
                : 1
                : 119-129
                Affiliations
                [1 ]Food Sciences and Biotechnology Department, Faculty of Chemistry, Universidad Nacional Autónoma de México, ( https://ror.org/01tmp8f25) Mexico City, Mexico
                [2 ]Department of Physical Chemistry, Faculty of Chemistry, Universidad Nacional Autónoma de México, ( https://ror.org/01tmp8f25) Mexico City, Mexico
                [3 ]Department of Chemical Engineering, Faculty of Science and Engineering, The University of Manchester, ( https://ror.org/027m9bs27) Manchester, UK
                Author information
                http://orcid.org/0000-0001-5542-276X
                Article
                2953
                10.1007/s00449-023-02953-7
                10776465
                38006410
                da62adf7-60b0-40a9-9fb4-3e6b301b7e94
                © The Author(s) 2023

                Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

                History
                : 6 July 2023
                : 15 November 2023
                Funding
                Funded by: FundRef http://dx.doi.org/10.13039/501100006087, Dirección General de Asuntos del Personal Académico, Universidad Nacional Autónoma de México;
                Award ID: PAPIIT IN219520
                Award ID: IN214123
                Categories
                Research Paper
                Custom metadata
                © Springer-Verlag GmbH Germany, part of Springer Nature 2024

                Biomedical engineering
                enzymatic hydrolysis,inulin,polyhydroxybutyrate,cupriavidusnecator,bioplastics

                Comments

                Comment on this article