Fiber Separation From Wood Pulp Using Slider Crank Mechanism

The Fiber separating machine is used to separate the fibers from their raw material (wood pulp). The machine is based on slider crank mechanism in this an iron disk is mounted to the electrical motor. A slider with a rough tooth is present in its bottom. By using the connecting rod, the disk and slider are connected together. The connecting rod converts the rotary motion into the linear motion. By using the forward and backward motion the fibers are de - fiberized from the raw material (wood pulp). This machine is used for small scale industries where bulk machines are not required. The main application of this wood pulp fiber is the making of napkins.

Content

Author and article information

Journal

Title: ScienceOpen Preprints

Publisher: ScienceOpen

Publication date (Electronic preprint): 24 September 2021

Affiliations

[1 ] Mechanical Engineering Department, Anand Institute of Higher Technology, Kalasalingam Nagar IT Corridor, Old Mahabalipuram Road, Kazhipattur, Tamil Nadu 603 103, India.

Author notes

[* ]Email: meiarulr@ 123456gmail.com .

Author information

MEIARUL RAJENDRAN https://orcid.org/0000-0003-4387-7091

Article

DOI: 10.14293/S2199-1006.1.SOR-.PPQKZZJ.v1

SO-VID: d895ddb9-d0fb-4f4b-a55a-034a7c47fa0a

License:

This work has been published open access under Creative Commons Attribution License CC BY 4.0 , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Conditions, terms of use and publishing policy can be found at www.scienceopen.com .

History

Date received : 24 September 2021

Data availability: All data generated or analysed during this study are included in this published article (and its supplementary information files).

ScienceOpen disciplines: Engineering

Keywords: raw material,slider crank mechanism,de-fiberized,wood pulp,napkins

References

Erkaya Selçuk, Uzmay İbrahim. Optimization of transmission angle for slider-crank mechanism with joint clearances. Structural and Multidisciplinary Optimization. Vol. 37(5):493–508. 2009. Springer Science and Business Media LLC. [Cross Ref]
Erkaya Selçuk, Uzmay İbrahim. Experimental investigation of joint clearance effects on the dynamics of a slider-crank mechanism. Multibody System Dynamics. Vol. 24(1):81–102. 2010. Springer Science and Business Media LLC. [Cross Ref]

Comments

MEIARUL RAJENDRAN wrote:

Nice

2021-10-05 07:54 UTC

Comment on this article

[1] Erkaya Selçuk, Uzmay İbrahim. Optimization of transmission angle for slider-crank mechanism with joint clearances. Structural and Multidisciplinary Optimization. Vol. 37(5):493–508. 2009. Springer Science and Business Media LLC. [Cross Ref]

[2] Erkaya Selçuk, Uzmay İbrahim. Experimental investigation of joint clearance effects on the dynamics of a slider-crank mechanism. Multibody System Dynamics. Vol. 24(1):81–102. 2010. Springer Science and Business Media LLC. [Cross Ref]